Author |
Message |
rummya87
MMT Pro Member
Joined: Tue Jul 28, 2009 5:33 am Posts: 122
|
 'Bout to get a 23GTR
So my 23 GDLT got rear-ended recently, bent the shaft slightly, skeg, and supports and also the powerhead keeps backfiring under load. Long story short, I think the thing is totaled and the bitch that hit me's insurance will be paying me market value for the motor. So I'm thinking the 23 GTR would be great on the back of my boat. I haven't test driven one yet but i've seen em and they look great. I've heard great things about the motors and the customer service. Also, I dont plan on ripping through mud just for fun, more like an "as needed" kinda deal. I want a mud motor for cutting through heavy vegetation and running really skinny and possibly muddy when hunting ducks in the salt marsh. I really like the instant reverse option. I see a lot of people on there have the 23 or 35 GTR and I wanted to know y'alls opinion before I go ahead and pull the trigger. Do these things have any regular problems with the gearbox or lower? Maintenance looks pretty easy on them. Thanks!
|
Fri May 14, 2010 7:30 pm |
|
 |
quackconsumer
MMT Elite Member
Joined: Wed Jan 14, 2009 7:54 pm Posts: 5582
|
 Re: 'Bout to get a 23GTR
Have you ever bought sumthin and after da new wares off you start gettin dat buyers remorse feelin.....................................
Well you ain't gonna feel dat way wit da GTR. You just gonna love it more every day dat passes. Only thing dat I would recomend is if your boat is big enough get da 35 HP.
|
Fri May 14, 2010 7:35 pm |
|
 |
Gatorpoint
MMT 1000 Club
Joined: Tue Jan 13, 2009 8:09 pm Posts: 1175 Location: A slough behind you, TEXAS
|
 Re: 'Bout to get a 23GTR
Do it you wont regret it. Be sure and talk to the guys at Gatortail and they can answer your questions and get you set up right. But from going from a LT to a GTR will be a move you wont look back on from what you say you are looking for and how you use your boat.
_________________ 1854 Brotha Breaux Bateau pullin' a 35 GT arrrrahhh! Willett Welding custom boat trailer
A$$, Ca$h, or Ga$ -- NO FREE RIDES!!
|
Fri May 14, 2010 7:36 pm |
|
 |
dead animal
MMT 1000 Club
Joined: Fri Jan 16, 2009 3:18 pm Posts: 1726
|
 Re: 'Bout to get a 23GTR
go get a free demo drive from whatever dealer u talk to. they might even slap one on ur boat so u can see exactly what u are getting.
me personally, i'd get a prodrive, but the gatortail is a great unit.
good luck with whatever u choose!!!!
|
Fri May 14, 2010 7:43 pm |
|
 |
rummya87
MMT Pro Member
Joined: Tue Jul 28, 2009 5:33 am Posts: 122
|
 Re: 'Bout to get a 23GTR
Thanks for the advice! I didn't wanna go with Prodrive b/c if i'm gonna have reverse, it has to be instant. I'd be using it to get around docks and pilings, on and off the trailer, ect, not really to use in the mud. I actually wasn't planning on going through a dealer as I live in Florida and there ain't any near here. I was gonna order it direct from GT and have it shipped to my boat manufacturer in Orlando, Fl .... here's my boat so y'all can give me more opinions! boat.jpg
The raised casting platform and trolling motor are all removable for duck hunting, I kept the cockpit open for maximum fishing/gear space and will probably be using 5 gal buckets with spin lids for hunting, to keep a low profile and have 360 degree view. When fishing with two, the passenger sits on the deck with their legs in the cockpit while underway.
You do not have the required permissions to view the files attached to this post.
|
Fri May 14, 2010 7:47 pm |
|
 |
JIMMY W
MMT 1000 Club
Joined: Tue Jan 13, 2009 8:02 pm Posts: 4534 Location: South Louisiana
|
 Re: 'Bout to get a 23GTR
Go with the 35 HP and you will be happy!I owned the ProDrives and now have a GatorTail and they are both great motors!You will not be happy with the 23!!
_________________ 17/54 GT EXTREME Center Console, Huntdeck w/ GTR 35
Hoyt Mods and some other goodies
|
Fri May 14, 2010 8:07 pm |
|
 |
quackconsumer
MMT Elite Member
Joined: Wed Jan 14, 2009 7:54 pm Posts: 5582
|
 Re: 'Bout to get a 23GTR
How long is your boat and what is your transom hieght and angle?
|
Fri May 14, 2010 8:09 pm |
|
 |
rummya87
MMT Pro Member
Joined: Tue Jul 28, 2009 5:33 am Posts: 122
|
 Re: 'Bout to get a 23GTR
16ft boat, 15" cutaway transom, not sure of the angle. I really can't afford a 35 GTR but I was fine and happy with the 23LT and I believe the SD will be a little faster, so I think I'll survive with a 23 vs a 35. To me, spending the extra 1500 isn't worth the two or three extra minutes underway b/c I almost never run more than 10 miles in one direction
|
Fri May 14, 2010 8:23 pm |
|
 |
quackconsumer
MMT Elite Member
Joined: Wed Jan 14, 2009 7:54 pm Posts: 5582
|
 Re: 'Bout to get a 23GTR
Wit dat setup I think you'll do fine wit da 23
|
Fri May 14, 2010 8:35 pm |
|
 |
rebbeer
MMT Pro Member
Joined: Thu Feb 05, 2009 7:39 pm Posts: 417 Location: Lafayette, LA
|
 Re: 'Bout to get a 23GTR
Man, that's a sweet little fishin rig right there. You will be so much happier with a surface drive. 
_________________ 35 hp CDI MB HD Sport pushing a 17'6" Uncle J custom bateau
|
Fri May 14, 2010 9:00 pm |
|
 |
JIMMY W
MMT 1000 Club
Joined: Tue Jan 13, 2009 8:02 pm Posts: 4534 Location: South Louisiana
|
 Re: 'Bout to get a 23GTR
_________________ 17/54 GT EXTREME Center Console, Huntdeck w/ GTR 35
Hoyt Mods and some other goodies
|
Sat May 15, 2010 8:56 am |
|
 |
keestan31
MMT 1000 Club
Joined: Fri Aug 21, 2009 9:40 am Posts: 1703 Location: Groves, Texas
|
 Re: 'Bout to get a 23GTR
Man that is a nice rig...you wont regret getting the GTR it is a great setup and the customer service is next to none
|
Sat May 15, 2010 10:47 am |
|
 |
dog walker
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm Posts: 5282 Location: Meraux,La.
|
 Re: 'Bout to get a 23GTR
Almost all of my problems were briggs related, no real lower unit trouble.
I know the price is alot to get over as far as 23 vs 35 but the speed is not everything its the load carrying ability and the power to get you out of a bind that the 35 has over the 23 that makes the differance.
|
Sat May 15, 2010 11:12 am |
|
 |
quack addict
MMT Addict
Joined: Tue Jan 13, 2009 5:44 pm Posts: 620 Location: Metairie, LA
|
 Re: 'Bout to get a 23GTR
if you can, try test driving first. that hull is very different than most MM hulls and I would be curious to see how the GT would perform on that hull. hull designs can be a deal breaker sometimes no matter how great the motor is. i test drove a 23 GTR on my GD hull and it performed horribly. before you make a big purchase like this, check out all your options before going all out. hell, the GT might perform great but it's a risk. if you talk to kyle and the guys over there they might know someone that has a set up like that. they are stand up fellas and will tell you if it will work or not.
_________________ "I have been blessed with many things in this life, an arm like a rocket, a c*ck like a Burmese Python and a mind of a f*ckin scientist." -Kenny F*ckin Powers
Gator Trax 3-Man Gatorhide with a Mud Buddy HD Sport 5000
Large Big Green Egg with rounded chines
|
Sat May 15, 2010 4:22 pm |
|
 |
dead animal
MMT 1000 Club
Joined: Fri Jan 16, 2009 3:18 pm Posts: 1726
|
 Re: 'Bout to get a 23GTR
bring ur boat and go demo the 23 then the 35. thank me later. good luck 
|
Sat May 15, 2010 7:51 pm |
|
 |
bayouboy
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm Posts: 5376 Location: Venice, La
|
 Re: 'Bout to get a 23GTR
X 15 on the 35 myboy! hell, get a used one to save some duckies! GT's customer service is outstanding either way!
PS. Thats a fine looking rig!
|
Sat May 15, 2010 8:22 pm |
|
 |
|