Author |
Message |
drake799
MMT Member
Joined: Sat Oct 16, 2010 9:10 pm Posts: 7
|
 Surface Drive motor ?
Ok new to this site and this mud motor stuff but looking into getting 1. I have a 1652 F&F Flatbottom i'm looking to get a motor for. What would be a good size motor for this boat? Something that will push it with decent power. Any help you can give would be greatly appreciated. Thanks
|
Sun Oct 17, 2010 2:09 pm |
|
 |
Woodiebuster
MMT Elite Member
Joined: Wed Mar 03, 2010 7:00 pm Posts: 6060 Location: Choudrant, La
|
 Re: Surface Drive motor ?
A 16x52 should be big enough to float a 35 hp SD, is the boat a true slickbottom mud hull or a standard flatbottom?
What brand mm are you leanin twoards? Oh, and welcome to the site. Hope you arent offended easily.
_________________ CSM Custom 18x42 Battleship with a 36 PD beating you to the hole My Rig (Old Motor) viewtopic.php?f=5&t=45193
(New Motor) viewtopic.php?f=5&t=54733 Stumps Fear Me
|
Sun Oct 17, 2010 2:13 pm |
|
 |
DuckHunterF250
MMT 1000 Club
Joined: Tue Jun 29, 2010 8:32 pm Posts: 1801 Location: atlanta texas
|
 Re: Surface Drive motor ?
how big of a load are u normally running? are u looking for one with or without the reverse option?
_________________ 1854 DeadFowl custom boat 35 GTR "The bitterness of poor quality remains long after the sweetness of low price is forgotten."
|
Sun Oct 17, 2010 2:14 pm |
|
 |
JIMMY W
MMT 1000 Club
Joined: Tue Jan 13, 2009 8:02 pm Posts: 4534 Location: South Louisiana
|
 Re: Surface Drive motor ?
Go with a 35 HP Gator-Tail 
_________________ 17/54 GT EXTREME Center Console, Huntdeck w/ GTR 35
Hoyt Mods and some other goodies
|
Sun Oct 17, 2010 2:18 pm |
|
 |
Woodiebuster
MMT Elite Member
Joined: Wed Mar 03, 2010 7:00 pm Posts: 6060 Location: Choudrant, La
|
 Re: Surface Drive motor ?
What terrain are you running in? Stumps? Veggies? Sand? Mud? A regular flat boat will get beat to hell in stumps, you may want to re-enforce the transom some more also.
_________________ CSM Custom 18x42 Battleship with a 36 PD beating you to the hole My Rig (Old Motor) viewtopic.php?f=5&t=45193
(New Motor) viewtopic.php?f=5&t=54733 Stumps Fear Me
|
Sun Oct 17, 2010 2:18 pm |
|
 |
Woodiebuster
MMT Elite Member
Joined: Wed Mar 03, 2010 7:00 pm Posts: 6060 Location: Choudrant, La
|
 Re: Surface Drive motor ?
_________________ CSM Custom 18x42 Battleship with a 36 PD beating you to the hole My Rig (Old Motor) viewtopic.php?f=5&t=45193
(New Motor) viewtopic.php?f=5&t=54733 Stumps Fear Me
|
Sun Oct 17, 2010 2:19 pm |
|
 |
drake799
MMT Member
Joined: Sat Oct 16, 2010 9:10 pm Posts: 7
|
 Re: Surface Drive motor ?
It is a true flatbottom i will be using it for duck hunting so the loads will be fairly heavy with decoys and 2 to 3 people the area i hunt is just a flooded bottom it's not terribly rough just sometime the water can be too low to run a outboard safely i was thinkin about getting a motor in the 20 something range i didn't know if the 35's and such would be too heavy Do mud motors bolt thru the transom or do they just get clamped down up on the top? Thanks for the input so far
|
Sun Oct 17, 2010 5:40 pm |
|
 |
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
 Re: Surface Drive motor ?
The pd's hang over the top and bolt through the transom. I don't know about the others, never paid that much attention to one.
|
Sun Oct 17, 2010 5:42 pm |
|
 |
DuckHunterF250
MMT 1000 Club
Joined: Tue Jun 29, 2010 8:32 pm Posts: 1801 Location: atlanta texas
|
 Re: Surface Drive motor ?
mudbuddys are the same way. they have the 2 clamps u tighten down and it also bolts to the transom. with a load like that i wouldnt go below a 35. that size boat will have no problem holding a 35
_________________ 1854 DeadFowl custom boat 35 GTR "The bitterness of poor quality remains long after the sweetness of low price is forgotten."
|
Sun Oct 17, 2010 5:45 pm |
|
 |
Orangefoot
MMT Addict
Joined: Sun Jan 10, 2010 12:23 pm Posts: 519 Location: West Monroe, LA
|
 Re: Surface Drive motor ?
_________________ Gatortail 1846 35hp GTR with calens stage 2 mods
|
Sun Oct 17, 2010 5:59 pm |
|
 |
JIMMY W
MMT 1000 Club
Joined: Tue Jan 13, 2009 8:02 pm Posts: 4534 Location: South Louisiana
|
 Re: Surface Drive motor ?
_________________ 17/54 GT EXTREME Center Console, Huntdeck w/ GTR 35
Hoyt Mods and some other goodies
|
Sun Oct 17, 2010 6:17 pm |
|
 |
sedlmayrje1723
MMT Pro Member
Joined: Tue May 04, 2010 9:13 pm Posts: 197
|
 Re: Surface Drive motor ?
Don't sell yourself short on horsepower, get the most horsepower that oyu can. Whatever engine you chose, get the most horsepower, that is all that I have to say.
|
Mon Oct 18, 2010 6:20 pm |
|
 |
Chico80x
MMT Addict
Joined: Tue Aug 11, 2009 10:55 am Posts: 743 Location: Ft. Lauderdale, FL
|
 Re: Surface Drive motor ?
I have a Mud Buddy Black Death 5500 that I'm very happy with, it will push your boat nicely at 30+ mph.
_________________ "We Are Products Of Our Decisions"
Gator Trax 1750HD With Mud Buddy Black Death 5500
|
Mon Oct 18, 2010 7:49 pm |
|
 |
take'emgator
MMT Super Elite Member
Joined: Mon Oct 19, 2009 6:38 pm Posts: 10201 Location: SETX
|
 Re: Surface Drive motor ?
|
Mon Oct 18, 2010 8:16 pm |
|
 |
quackconsumer
MMT Elite Member
Joined: Wed Jan 14, 2009 7:54 pm Posts: 5582
|
 Re: Surface Drive motor ?
If you buy a motor based on what you read on da internet, then you deserve what ever piece of shit you may end up wit. Go test drive dem all and see what one best suits you.
|
Tue Oct 19, 2010 4:51 am |
|
 |
Chico80x
MMT Addict
Joined: Tue Aug 11, 2009 10:55 am Posts: 743 Location: Ft. Lauderdale, FL
|
 Re: Surface Drive motor ?
_________________ "We Are Products Of Our Decisions"
Gator Trax 1750HD With Mud Buddy Black Death 5500
|
Tue Oct 19, 2010 7:19 am |
|
 |
BradS
MMT 1000 Club
Joined: Wed Jan 14, 2009 5:23 am Posts: 4514 Location: Lafayette, La
|
 Re: Surface Drive motor ?
You could have test driven one --- You didnt want to travel to buy one --- I would never buy one without test driving it.
PD and GT are within 5 miles of each other and GD is about 60 miles east.
GO TEST DRIVE and see which one you feel more comfortable with
|
Tue Oct 19, 2010 7:23 am |
|
 |
Cammander26
MMT Pro Member
Joined: Mon Oct 04, 2010 1:09 pm Posts: 315
|
 Re: Surface Drive motor ?
35 Hp GTR with reverse!
_________________ TRYIN' TO LEAVE A CARBON FOOT PRINT! BUMMIN RIDES AT THE MOMENT, UNDER CONSTRUCTION!
|
Tue Oct 19, 2010 7:39 am |
|
 |
|