|
|
FAQ
• Login
|
|
It is currently Wed Jul 09, 2025 2:16 am
|
|
Page 1 of 1
|
[ 7 posts ] |
|
Anybody Ever Had A Prop Worked
| Author |
Message |
|
Powerstroke9773
MMT Pro Member
Joined: Tue Apr 05, 2011 8:01 pm
Posts: 164
Location: Nixonton, North Carolina
|
 Anybody Ever Had A Prop Worked i have a 9x7 prop for a longtail that i would like to have worked down to 8x4 is this possible and if it is is it more affordable than just buying a brand new prop?
_________________
17Foot Aquasport 85 Evinrude
20GDLT Looking for a Hull
|
| Thu Jun 16, 2011 8:14 pm |
|
|
|
pooldoo73
MMT F.E.
Joined: Tue Jan 25, 2011 5:47 pm
Posts: 886
Location: Plaquemine
|
Re: Anybody Ever Had A Prop Worked It would b cheaper to get a new prop. U cut an inch off the dia. And you have cut all the cup out of the wheel. Don't think it could b taken from a 7 to a 4 pitch either.
_________________
18'x54"CC Hanko/ 36PD
|
| Fri Jun 17, 2011 3:58 pm |
|
|
|
Powerstroke9773
MMT Pro Member
Joined: Tue Apr 05, 2011 8:01 pm
Posts: 164
Location: Nixonton, North Carolina
|
Re: Anybody Ever Had A Prop Worked well thanks i do appreciate it cheapest place around for a reliable prop ?
_________________
17Foot Aquasport 85 Evinrude
20GDLT Looking for a Hull
|
| Sat Jun 18, 2011 10:10 am |
|
|
|
pooldoo73
MMT F.E.
Joined: Tue Jan 25, 2011 5:47 pm
Posts: 886
Location: Plaquemine
|
Re: Anybody Ever Had A Prop Worked Not sure where u r located. U should b able 2 get a good wheel from Hopkins propeller in Covington, La. Give them a call, they will drill the prop to fit any shaft.
_________________
18'x54"CC Hanko/ 36PD
|
| Sat Jun 18, 2011 2:01 pm |
|
|
|
Powerstroke9773
MMT Pro Member
Joined: Tue Apr 05, 2011 8:01 pm
Posts: 164
Location: Nixonton, North Carolina
|
Re: Anybody Ever Had A Prop Worked unfortunately im a long way from where you guys are at so im thinking ebay might be my best bet
_________________
17Foot Aquasport 85 Evinrude
20GDLT Looking for a Hull
|
| Sat Jun 18, 2011 2:49 pm |
|
|
|
pooldoo73
MMT F.E.
Joined: Tue Jan 25, 2011 5:47 pm
Posts: 886
Location: Plaquemine
|
Re: Anybody Ever Had A Prop Worked Hopkins will ship anywhere.
_________________
18'x54"CC Hanko/ 36PD
|
| Sat Jun 18, 2011 2:57 pm |
|
|
|
Thelizard007
MMT Pro Member
Joined: Tue Jul 21, 2009 11:14 pm
Posts: 87
Location: Westwego
|
Re: Anybody Ever Had A Prop Worked They can be worked but only +1-2 pitch and cutting it down isn't worth the time we charge $65 to do them but we don't cut them down only change cup and pitch
_________________
16 X 54 Prodrive boat with 32hp Prodrive stage 1 motor runs 33mph
|
| Thu Jul 07, 2011 11:02 am |
|
|
|
|
|
Page 1 of 1
|
[ 7 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 40 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
