Author |
Message |
Salty Dawg
MMT Pro Member
Joined: Sun Feb 13, 2011 8:26 pm Posts: 334
|
 swirl pattern on hull...
How would a guy go about doing a scale pattern on his bare hull like this boat...
already have tried a wire wheel on a drill bigger coarser wire cup wheel on a Gringer and Larger Sander/buffer.. 120 - 180 - 220 grit on the Sander/Buffer... tried it on all diffrent speeds and I can't keep good control of the tool...
any ideas are welcome... I do not want to paint my new hull...
_________________ 18x52 Widow Maker Hull being pushed by a HD 5500 BAMF...
|
Mon Jun 20, 2011 6:37 pm |
|
 |
CDMCHEVY07
MMT Addict
Joined: Wed Sep 29, 2010 4:26 pm Posts: 644 Location: Goose Creek, South Carolina
|
 Re: swirl pattern on hull...
why would you want that? just curious
_________________ 1754 x series prodrive 36 hp prodrive
|
Mon Jun 20, 2011 7:52 pm |
|
 |
kibb
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:58 pm Posts: 2731 Location: Lafayette, LA
|
 Re: swirl pattern on hull...
Maybe he likes things that are hard to keep clean. Unless, he clear coats it, of course.
_________________ 1644 WeldCraft / 27 GDLT Ranger R71 / 125 Merc
|
Mon Jun 20, 2011 7:58 pm |
|
 |
Old School
MMT 1000 Club
Joined: Thu Dec 17, 2009 9:44 pm Posts: 3067 Location: Earth
|
 Re: swirl pattern on hull...
One of them there welder boys can tell u how it done
_________________ Gator tail
|
Mon Jun 20, 2011 8:50 pm |
|
 |
autogateman
MMT Sponsor
Joined: Thu Sep 16, 2010 10:32 pm Posts: 4036 Location: Gonzales La
|
 Re: swirl pattern on hull...
It's done with a tiger disc on a grinder held flat.
|
Mon Jun 20, 2011 10:05 pm |
|
 |
kibb
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:58 pm Posts: 2731 Location: Lafayette, LA
|
 Re: swirl pattern on hull...
Do ya mark a grid to keep the pattern straight? Or are they just that good?
_________________ 1644 WeldCraft / 27 GDLT Ranger R71 / 125 Merc
|
Tue Jun 21, 2011 7:27 am |
|
 |
CLICKSTER
MMT 1000 Club
Joined: Sat Feb 12, 2011 4:08 pm Posts: 1552
|
 Re: swirl pattern on hull...
Seen them do it on a smaller version on a gun show one time. They used cutting cream or cutting powder and used a drill press with a wire brush bit, marked lines and grid. took them about 2 hours total to do about 1x1 area. looks good finished every other swirl was done the opposite direction.
|
Tue Jun 21, 2011 9:24 am |
|
 |
meterman3
MMT 1000 Club
Joined: Mon Dec 21, 2009 6:25 pm Posts: 1407
|
 Re: swirl pattern on hull...
Used a scotch pad on a drill light pressure did a truck bed
And I drive a pd and approve this message
_________________ driving a gd in ur lake and i aprove this message
|
Tue Jun 21, 2011 11:51 am |
|
 |
speckhound
New Member
Joined: Tue Jun 29, 2010 6:45 am Posts: 2
|
 Re: swirl pattern on hull...
If you want to keep bare aluminum clean, google sharkhide, good product!!
|
Tue Jun 21, 2011 2:44 pm |
|
 |
North LA Hunter
MMT Elite Member
Joined: Mon Aug 02, 2010 8:39 pm Posts: 6976 Location: West Monroe, LA
|
 Re: swirl pattern on hull...
Never done alum. but we do it on stainless all the time with a sandin pad on a grinder. And just get every kind of grit they have and some scrap alum. and practice.
|
Sun Jun 26, 2011 6:12 pm |
|
 |
Salty Dawg
MMT Pro Member
Joined: Sun Feb 13, 2011 8:26 pm Posts: 334
|
 Re: swirl pattern on hull...
Thanks for the info guys... I have a guy down the street that is a metal artist and he helped me out with a flap wheel on a grinder... we did a Reed jeweling pattern... going to coat it with sharkskin...
_________________ 18x52 Widow Maker Hull being pushed by a HD 5500 BAMF...
|
Tue Jun 28, 2011 9:24 pm |
|
 |
Team Camo
MMT Sponsor
Joined: Thu Oct 01, 2009 4:49 pm Posts: 8536 Location: Bridge City, TX
|
 Re: swirl pattern on hull...
Pics would be nice.
_________________ 1846 GTB & 35 GTR Team Gator-Tail
Killer Kallz & ANGLE PORT dealer (409) 720-8949
|
Tue Jun 28, 2011 9:26 pm |
|
 |
Salty Dawg
MMT Pro Member
Joined: Sun Feb 13, 2011 8:26 pm Posts: 334
|
 Re: swirl pattern on hull...
right... it pops way more in the sun... should flare a few birds... but this is my bowfishing rig...
_________________ 18x52 Widow Maker Hull being pushed by a HD 5500 BAMF...
|
Tue Jun 28, 2011 9:34 pm |
|
 |
SMELVIN
MMT Addict
Joined: Wed Sep 01, 2010 4:25 pm Posts: 638
|
 Re: swirl pattern on hull...
looks like it took a while
|
Tue Jun 28, 2011 9:46 pm |
|
 |
Salty Dawg
MMT Pro Member
Joined: Sun Feb 13, 2011 8:26 pm Posts: 334
|
 Re: swirl pattern on hull...
about 3 hours to do both sides the transome I just swirled since I was sick and tired of doing it and the pods kind of made it a pain in the azz.. we fished it in heavy flooded timber and scraped the chit out of it this weekend and it held up great... pretty much what I was looking for since paint for Vinyl would have looked like chit after one trip in the timber we fished in... now I need to web paint the inside and I should be set...
_________________ 18x52 Widow Maker Hull being pushed by a HD 5500 BAMF...
|
Tue Jun 28, 2011 9:52 pm |
|
 |
|