Author |
Message |
duckmaster21
MMT Member
Joined: Sat Oct 10, 2009 10:35 am Posts: 14
|
 Need some help / information /ideas on first surface motor
Need some info , advice or just what you got to say. I am going to buy a surface drive , wanting to know how important is reverse ? I am hunting on a very stumpy lake with large grass mats . These mat are so big the nutra rats walk on them as if on dry ground . They are also 50 to 100 yds. long . I am looking at a 15 to 16 ft. long , 42 to 48 in. wide boat with a motor in 25 to 35 hp range . Any input would be helpful , this will be the first surface drive for me .
thanks
|
Thu Oct 15, 2009 6:35 pm |
|
 |
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 Re: Need some help / information /ideas on first surface motor
you hunt millwood lake too?
|
Thu Oct 15, 2009 6:41 pm |
|
 |
Kirby
MMT Pro Member
Joined: Thu Oct 08, 2009 6:37 pm Posts: 99 Location: E. Oklahoma
|
 Re: Need some help / information /ideas on first surface motor
I have had my MB for 2yrs and love it, dont know any dif about having reverse (I have push pole rev) The only thing I would suggest is go with the 35 no matter which one you choose
_________________ Boomer Sooner!
|
Thu Oct 15, 2009 6:50 pm |
|
 |
quackconsumer
MMT Elite Member
Joined: Wed Jan 14, 2009 7:54 pm Posts: 5582
|
 Re: Need some help / information /ideas on first surface motor
Go wit 35-36 HP. 18' long will be much better than 15' or 16'. 42" - 54" is da best width to stay between. And would you buy a truck wit out reverse?
Dis is just my opinion.
|
Thu Oct 15, 2009 6:54 pm |
|
 |
schrieverboy
MMT F.E.
Joined: Tue Jul 21, 2009 7:06 am Posts: 916 Location: South,La
|
 Re: Need some help / information /ideas on first surface motor
i have a 1648 wit a 36 pd on it. it handles really good and get some allright speeds wit two people. as soon as u load it down wit another person and deeks your holeshots magically disapear. id do like quack. said and get a longer boat if u gonna be runnin wit heavier loads
_________________ 1648 w/ a 36 pd fpr on dat biatch G-14 CLASSIFIED SKIFF ON DA WAY!! Never try to educate someone who resists knowledge at all costs.
|
Thu Oct 15, 2009 6:59 pm |
|
 |
POKER1
MMT Elite Member
Joined: Tue Jan 13, 2009 8:02 pm Posts: 6243 Location: Bossier City
|
 Re: Need some help / information /ideas on first surface motor
18x48 with a 35/36. And the only ones that negate the reverse option are the ones that were not smart enough in the beginging to buy it and are now wishing they did...........  Seriously, those floating grass mats (floaton) can give anyone fits when you run up on one and are pushing around a 1/2 acre of grass. But that is were my reverse really shines. Thick veggies and Giga can't handle the Truth, FPR....... 
_________________ 18x48 Charles Leonard / 36PD
"I do think there is a Squatch in these woods"!!!!!
|
Thu Oct 15, 2009 7:11 pm |
|
 |
Gigafowl
MMT Elite Member
Joined: Tue Jan 13, 2009 7:19 pm Posts: 6441 Location: Trinity Bay - Texas
|
 Re: Need some help / information /ideas on first surface motor
Would you buy a motorcycle without reverse ?
ha ha ha
Get a big'un but test ride first to see what you like....
_________________ Eat - Sleep - Hunt ! ! !
"It is good to have an end to journey toward; but it is the journey that matters, in the end."
|
Thu Oct 15, 2009 7:14 pm |
|
 |
Kirby
MMT Pro Member
Joined: Thu Oct 08, 2009 6:37 pm Posts: 99 Location: E. Oklahoma
|
 Re: Need some help / information /ideas on first surface motor
_________________ Boomer Sooner!
|
Thu Oct 15, 2009 7:17 pm |
|
 |
quackconsumer
MMT Elite Member
Joined: Wed Jan 14, 2009 7:54 pm Posts: 5582
|
 Re: Need some help / information /ideas on first surface motor
|
Thu Oct 15, 2009 7:18 pm |
|
 |
Gigafowl
MMT Elite Member
Joined: Tue Jan 13, 2009 7:19 pm Posts: 6441 Location: Trinity Bay - Texas
|
 Re: Need some help / information /ideas on first surface motor
Matter 'o fact - yep I would !
And my ole 4x4 which ain't got no crawfish gear too !
_________________ Eat - Sleep - Hunt ! ! !
"It is good to have an end to journey toward; but it is the journey that matters, in the end."
|
Thu Oct 15, 2009 7:23 pm |
|
 |
craig
MMT Elite Member
Joined: Tue Jan 13, 2009 7:53 pm Posts: 7515 Location: Chauvin
|
 Re: Need some help / information /ideas on first surface motor
I wouldn't buy any Mud motor that didn't have reverse. But thats just me. I'm not real fond of the push pole. 
_________________ 1750 GatorTail Extreme/Stage 3 37 GTR HD Procrastination is a lot like masturbation. Sure it sounds great at the time but, in the end your only f--k--g yourself.
|
Thu Oct 15, 2009 7:35 pm |
|
 |
POKER1
MMT Elite Member
Joined: Tue Jan 13, 2009 8:02 pm Posts: 6243 Location: Bossier City
|
 Re: Need some help / information /ideas on first surface motor
Ever try push poling off a floaton mat in 6-8' of water? 
_________________ 18x48 Charles Leonard / 36PD
"I do think there is a Squatch in these woods"!!!!!
|
Thu Oct 15, 2009 7:39 pm |
|
 |
craig
MMT Elite Member
Joined: Tue Jan 13, 2009 7:53 pm Posts: 7515 Location: Chauvin
|
 Re: Need some help / information /ideas on first surface motor
_________________ 1750 GatorTail Extreme/Stage 3 37 GTR HD Procrastination is a lot like masturbation. Sure it sounds great at the time but, in the end your only f--k--g yourself.
|
Thu Oct 15, 2009 7:48 pm |
|
 |
BROOKS
MMT 1000 Club
Joined: Tue Jan 13, 2009 9:46 pm Posts: 4596 Location: East TEXAN Proud
|
 Re: Need some help / information /ideas on first surface motor
I wood not embark on anythang less ..... what you just described ....
follow mines wake and don't be skeered ....
Spell it fo you ???? .......
Gator-Tail ..........
_________________ Git a Gator-Tail or ride in mines wake ...... MtrFact !!!!! '05 Model .... Still Number One on the Water !!!!
|
Thu Oct 15, 2009 7:55 pm |
|
 |
dog walker
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm Posts: 5282 Location: Meraux,La.
|
 Re: Need some help / information /ideas on first surface motor
He's baacckkk,with the same old chit 
|
Thu Oct 15, 2009 8:38 pm |
|
 |
ej
MMT Member
Joined: Fri Oct 09, 2009 4:34 pm Posts: 5
|
 Re: Need some help / information /ideas on first surface motor
i have an 1846 gatortail boat and 35gtr. i love it. i hunt and ride in the mareapaus swamp area so i know allabout the stumps and weeds. i have no problems where im at. and the way i see it is if my reverse dont get me out, my push pole will. but its all ur preference.
|
Thu Oct 15, 2009 9:47 pm |
|
 |
POKER1
MMT Elite Member
Joined: Tue Jan 13, 2009 8:02 pm Posts: 6243 Location: Bossier City
|
 Re: Need some help / information /ideas on first surface motor
If my reverse don't get me out its time for the winch. 
_________________ 18x48 Charles Leonard / 36PD
"I do think there is a Squatch in these woods"!!!!!
|
Thu Oct 15, 2009 9:53 pm |
|
 |
Robn1020
MMT 1000 Club
Joined: Mon Feb 16, 2009 6:09 pm Posts: 4232 Location: Cypress, TX
|
 Re: Need some help / information /ideas on first surface motor
If you are truly "stuck" reverse ain't gonna do chit for you! Id take a winch way before reverse. But thats just from personal experience on the sand flats.
|
Fri Oct 16, 2009 7:07 am |
|
 |
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 Re: Need some help / information /ideas on first surface motor
|
Fri Oct 16, 2009 7:10 am |
|
 |
craig
MMT Elite Member
Joined: Tue Jan 13, 2009 7:53 pm Posts: 7515 Location: Chauvin
|
 Re: Need some help / information /ideas on first surface motor
_________________ 1750 GatorTail Extreme/Stage 3 37 GTR HD Procrastination is a lot like masturbation. Sure it sounds great at the time but, in the end your only f--k--g yourself.
|
Fri Oct 16, 2009 7:17 am |
|
 |
Robn1020
MMT 1000 Club
Joined: Mon Feb 16, 2009 6:09 pm Posts: 4232 Location: Cypress, TX
|
 Re: Need some help / information /ideas on first surface motor
|
Fri Oct 16, 2009 8:50 am |
|
 |
T-mac
MMT Addict
Joined: Tue Jan 13, 2009 4:53 pm Posts: 605
|
 Re: Need some help / information /ideas on first surface motor
|
Fri Oct 16, 2009 9:37 am |
|
 |
Robn1020
MMT 1000 Club
Joined: Mon Feb 16, 2009 6:09 pm Posts: 4232 Location: Cypress, TX
|
 Re: Need some help / information /ideas on first surface motor
|
Fri Oct 16, 2009 10:24 am |
|
 |
Crews
MMT 1000 Club
Joined: Wed Jan 14, 2009 9:07 pm Posts: 2260 Location: Lafayette
|
 Re: Need some help / information /ideas on first surface motor
I don't care what they say... ProDrive FPR is the one and only in the floaton. IF you are worried about busting a trail through thick grass to get to your spot, that's what you need. If you're anywhere near NE Texas, come ride with me... I'll show you.
_________________ 24x60 Dual Prodrives
|
Fri Oct 16, 2009 11:11 am |
|
 |
richardb
MMT Pro Member
Joined: Wed Feb 11, 2009 9:47 am Posts: 351 Location: Fresno, Ca
|
 Re: Need some help / information /ideas on first surface motor
I would say test drive or demo everything you can get your hands on and go with what you are most comfortable with and what you can afford. Just my 2 cents
_________________ 1652 w/ MB Mini 35
|
Fri Oct 16, 2009 11:22 am |
|
 |
T-mac
MMT Addict
Joined: Tue Jan 13, 2009 4:53 pm Posts: 605
|
 Re: Need some help / information /ideas on first surface motor
|
Fri Oct 16, 2009 1:00 pm |
|
 |
Skipr
MMT Addict
Joined: Fri Sep 11, 2009 6:48 pm Posts: 701 Location: Houma, LA
|
 Re: Need some help / information /ideas on first surface motor
I have a 35GTR and for me the reverse option is most usefull at the boat launch. I don't use it much other than that, but I would not go without it. The same goes for having power trim. I can adjust the motor with a touch of a switch. I guess I'm just lazy like that.
|
Fri Oct 16, 2009 1:28 pm |
|
 |
craig
MMT Elite Member
Joined: Tue Jan 13, 2009 7:53 pm Posts: 7515 Location: Chauvin
|
 Re: Need some help / information /ideas on first surface motor
_________________ 1750 GatorTail Extreme/Stage 3 37 GTR HD Procrastination is a lot like masturbation. Sure it sounds great at the time but, in the end your only f--k--g yourself.
|
Fri Oct 16, 2009 2:34 pm |
|
 |
Robn1020
MMT 1000 Club
Joined: Mon Feb 16, 2009 6:09 pm Posts: 4232 Location: Cypress, TX
|
 Re: Need some help / information /ideas on first surface motor
|
Fri Oct 16, 2009 2:57 pm |
|
 |
dog walker
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm Posts: 5282 Location: Meraux,La.
|
 Re: Need some help / information /ideas on first surface motor
Threads like this are just unproductive BULLCHIT
go test out motors and buy what you like
|
Fri Oct 16, 2009 3:22 pm |
|
 |
Crews
MMT 1000 Club
Joined: Wed Jan 14, 2009 9:07 pm Posts: 2260 Location: Lafayette
|
 Re: Need some help / information /ideas on first surface motor
just for the record, hitting stumps is a way of life up here where I"m at, and the ProDrive handles it fine. I used to own a GDSD, and still have plenty of friends that run them, and I really don't see and advantage a GDSD has over any other motor when it comes to smackin' stumps. jLight impacts mjay be a little easier with a floating tiller, but when you really smack one, it's still going to yank it out of your hand when it gets to the end of it's travel. Plus, if you leave it floating, you can't hold it up in the grass to keep the motor from popping out of the water.
Not talking trash... just stating facts. GDSD gets the job done just fine, but you have to put a little more work into it.
_________________ 24x60 Dual Prodrives
|
Fri Oct 16, 2009 4:38 pm |
|
 |
Robn1020
MMT 1000 Club
Joined: Mon Feb 16, 2009 6:09 pm Posts: 4232 Location: Cypress, TX
|
 Re: Need some help / information /ideas on first surface motor
|
Fri Oct 16, 2009 5:02 pm |
|
 |
duckmaster21
MMT Member
Joined: Sat Oct 10, 2009 10:35 am Posts: 14
|
 Re: Need some help / information /ideas on first surface motor
Thanks to everybody for all the information . Guessing reverse is a must have, I don't hunt on Millwood lake but have heard of it , I live in shreveport, I not sure about the larger boat , getting bigger than 16 ft. could get hard to run in trees , there are lots of tight cypress stands . For me very productive.
|
Sat Oct 17, 2009 7:06 am |
|
 |
dog walker
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm Posts: 5282 Location: Meraux,La.
|
 Re: Need some help / information /ideas on first surface motor
|
Sat Oct 17, 2009 11:10 am |
|
 |
|