It is currently Tue Jun 17, 2025 4:31 pm




Reply to topic  [ 11 posts ] 
 engine hours? 
Author Message
MMT Pro Member
User avatar

Joined: Sat Jan 17, 2009 9:13 pm
Posts: 97
Location: half up a tree
Post engine hours?
how many is too many for a pro-drive? would 200 be a deal breaker on say a 27 or a 25?

_________________
CVN73 Plank owner

Bad spellers of the world untie!!!!!


Tue Feb 10, 2009 4:19 pm
Profile
MMT Pro Member
User avatar

Joined: Thu Jan 15, 2009 12:20 pm
Posts: 203
Location: Flyover country
Post Re: engine hours?
I'd say negative, but then again I don't know shit.

_________________
"This hunting, This is not a sport, right? It's not a plaything. It defines who we are. It's our heart and soul. It's something that trancends a lot of things in our lives."

Rob Olson
Delta Waterfowl President


Tue Feb 10, 2009 4:24 pm
Profile
MMT 1000 Club
User avatar

Joined: Tue Jan 13, 2009 6:42 pm
Posts: 2377
Location: West Coast Wisconsin
Post Re: engine hours?
It all depends on how it's been maintained, but in general 200 hrs isn't squat on these engines.


Tue Feb 10, 2009 4:28 pm
Profile
MMT Member

Joined: Mon Jan 19, 2009 6:10 pm
Posts: 9
Location: Somewhere
Post Re: engine hours?
I don't know.... I'd say my lawn mower is hitting about 500 hrs. without an oil change. If you were talkin 2000hrs than maybe it would be a deal breaker but I don't know sheet either 8-)


Tue Feb 10, 2009 4:48 pm
Profile
MMT 1000 Club
User avatar

Joined: Sun Jan 25, 2009 8:09 pm
Posts: 1268
Location: North Texas
Post Re: engine hours?
I have alot of experience with these air cooled engines. We run em in our carpet cleaning business. They power a huge blower (vacuum) and 1500 psi water pumps.

Anyway, 2 of my engines have nearly 4000 hrs on them. We don't change the oil as regularly as we should. In 13 years and thousands of hours of running these things at WOT, I've never had one engine failure.

200 hours is not even broken in yet.....

_________________
WC Custom 1854


Tue Feb 10, 2009 5:32 pm
Profile WWW
MMT Addict

Joined: Fri Jan 23, 2009 11:07 am
Posts: 602
Location: Baton Rouge
Post Re: engine hours?
I don't know squat about them either, but I got one with about 300 hours on it and when it was pulled apart for mods it was still perfect inside. I know a guy with a mower that has over 2000 and it still runs strong.


Tue Feb 10, 2009 6:47 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 8:34 am
Posts: 1092
Location: Unaffiliated, SETX group has caused me to renounce my Texas Citizenship
Post Re: engine hours?

_________________
"Democracy is two wolves and a lamb voting on what to have for lunch.
Liberty is a well-armed lamb contesting the outcome of the vote."-Benjamin Franklin


Tue Feb 10, 2009 9:40 pm
Profile
MMT 1000 Club
User avatar

Joined: Sun Jan 25, 2009 8:09 pm
Posts: 1268
Location: North Texas
Post Re: engine hours?

_________________
WC Custom 1854


Wed Feb 11, 2009 9:03 am
Profile WWW
MMT Member

Joined: Fri Jan 16, 2009 10:31 am
Posts: 26
Location: Stephenville Texas
Post Re: engine hours?
Ive got around 400 hours on mine and it still runs great.

_________________
27pd pushin a 1748 pd x series


Wed Feb 11, 2009 10:18 am
Profile
MMT Addict
User avatar

Joined: Thu Jan 15, 2009 9:33 am
Posts: 722
Post Re: engine hours?

_________________
Just your basic cracka ass cracka

1840 gator tail with 35GTR
15xx Bateau with 15 honda


Wed Feb 11, 2009 12:20 pm
Profile
MMT Pro Member
User avatar

Joined: Sun Feb 08, 2009 3:15 pm
Posts: 117
Location: Prairieville,LA.
Post Re: engine hours?
pull the plugs to see if they are black or white( they should of been changed at first 100 hours) if they are black and new then check the air cleaner for dirt (not common) . next i would check the compression and if the thing has been left outside with no cover. I could go on for hours about what to check so the best thing to do is take it to a mower repair shop to check it out. to answer your original question on 200 hours is that i would be alot more concerned if it had 1000 hours and lots of corrosion on it.as youve heard before,that motor is not even broken in yet ....... hope this helped


Wed Feb 11, 2009 6:00 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 11 posts ] 

Who is online

Users browsing this forum: No registered users and 131 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: