Author |
Message |
cody
MMT Member
Joined: Sun Nov 01, 2009 6:22 pm Posts: 8
|
 31 vanguard speed
I am about to buy a 31 vanguard inboard mudboat on a haul about 14-16 ft. long. It has a clutch! I was wondering what the average speed for the boat should be and what could i do to make it go faster?
|
Sun Nov 01, 2009 6:30 pm |
|
 |
bbb
MMT 1000 Club
Joined: Wed Sep 02, 2009 2:54 pm Posts: 1554 Location: SW Georgia
|
 Re: 31 vanguard engine help
I think you are asking what kind of speed can you expect from a 31 short tail on a 14-16ft boat.
If so, I would say low to mid 20's.
Want more speed, you'll need to buy some of the aftermarket parts.
You can go as fast as your pocketbook is deep.
_________________ 19x54 Seminole Extreme with a 35hp CDI GDSD. Mikuni. Marsh Mellow. Heads. Cam.
|
Mon Nov 02, 2009 9:49 am |
|
 |
cody
MMT Member
Joined: Sun Nov 01, 2009 6:22 pm Posts: 8
|
 Re: 31 vanguard engine help
no its not an outboard its an inboard engine
|
Mon Nov 02, 2009 9:01 pm |
|
 |
slambin
MMT 1000 Club
Joined: Mon Feb 16, 2009 10:21 pm Posts: 1262 Location: St. Francisville, LA
|
 Re: 31 vanguard speed
then its a mudboat. I know my buddies mudboat with a 27 kohler only went around 18 and it was a 1438 skiff. Your prolly looking around the same with the bigger hull
_________________ 2060 CC 3/4 Gator-tail 1/4 Brother Breaux Boat /35GTR Cowboy thought- a thong on a woman is like a barbed wire fence. It protects the property but doesnt obstruct the view.
|
Mon Nov 02, 2009 9:20 pm |
|
 |
LA OUTLAW
MMT 1000 Club
Joined: Mon Mar 02, 2009 9:25 pm Posts: 1096 Location: Morgan City
|
 Re: 31 vanguard speed
PM Coodik he just finished one I believe it was that size a few days ago.
_________________ 1754 GT EXTREME 37EFI
|
Mon Nov 02, 2009 9:28 pm |
|
 |
bayouboy
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm Posts: 5376 Location: Venice, La
|
 Re: 31 vanguard speed
Your speed will depend on the clutches gear ratio also.
|
Mon Nov 02, 2009 9:45 pm |
|
 |
machete31
MMT Member
Joined: Tue Aug 25, 2009 2:59 pm Posts: 22
|
 Re: 31 vanguard speed
That was my motor that Coondik just finished up. My boat is a Machete (Super Godevil) type unit. The stock 31 with a new prop light boat I could get 23-25 with no wind or current, 18-20 with a hunting load. If you have the ZF transmission and it has a left hand rotation prop you are looking at 1.8:1 reduction, right hand rotation is 1.4:1. I am running a 12x14 Hopkins cleaver (LH rotation) with alot of cup and tip curl. I'll assume if you set it up like a regular mudboat you would run a regular mudboat prop since the prop won't run on the surface. The engine work I just had done was shave the heads, SS valves, timing advance, 36 intake and carb, K&N filter and dual exhaust. I'm swinging the crap out of my old prop, Hopkins is currently building a new prop to match up to the engine mods I had done. I'm not really counting on much more top end but I think my load speeds will be better. One thing I can tell you, my motor never idled and ran so smooth. That Coondik dude is the man!!!
|
Tue Nov 03, 2009 10:50 am |
|
 |
dead animal
MMT 1000 Club
Joined: Fri Jan 16, 2009 3:18 pm Posts: 1726
|
 Re: 31 vanguard speed
if ur turning the old prop too much, the new prop ur getting, assuming it's either bigger in dia or more pitch/cup, should bring down the rpm's and bring up the speed. that is unless it's too much prop, then u will have to wear it out sum to be able to turn it. good luck, those machete's are a nice rig. 
|
Tue Nov 03, 2009 12:34 pm |
|
 |
forever draggin
MMT Elite Member
Joined: Tue Jan 13, 2009 7:10 pm Posts: 6664 Location: in the marsh with a boat load full of dead hookers
|
 Re: 31 vanguard speed
i ran mudboats all my life, most people i know still do, i would say mid 20s
|
Tue Nov 03, 2009 9:32 pm |
|
 |
|