| Author |
Message |
|
ROGER504
MMT Pro Member
Joined: Sat Sep 18, 2010 11:20 am
Posts: 52
Location: METAIRIE, LA
|
 transom saver Im not sure if this right place but its the closest one since it goes to lower unit. I have 36 pd on 1648 gdsd. I was wandering about my transom saver. I have modified mine (regular outboard one) a few times and cant get it right. it slides off, slides up, twist to side etc..... I have it strapped to trailer and lower unit and still no luck. so I was wandering if anybody has pics of theirs or any suggestions. thanks
_________________
1648 GDSD WITH 36PD
|
| Mon Oct 14, 2013 2:58 pm |
|
|
|
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm
Posts: 9869
|
Re: transom saver Turn the motor to the side, and trim it all the way up.
|
| Mon Oct 14, 2013 3:29 pm |
|
|
|
teaves2257
MMT Member
Joined: Wed Nov 02, 2011 8:03 pm
Posts: 19
Location: Nw Louisiana
|
Re: transom saver I turn it to reverse and trim it so the cavitation plate hits the boat.
_________________
36hp PD ,Setx heads, MM exhaust, mikuni, intake, pvt cam, and longer rods pushing a 1750 gatortrax
|
| Tue Oct 15, 2013 7:04 pm |
|
|
|
banded-mallard
MMT 1000 Club
Joined: Wed Oct 07, 2009 8:18 pm
Posts: 4310
|
Re: transom saver
|
| Wed Oct 16, 2013 5:35 am |
|
|
|
cr244
MMT 1000 Club
Joined: Sat Jun 16, 2012 9:43 am
Posts: 1504
Location: Watoola, Alabama
|
Re: transom saver
|
| Sat Oct 26, 2013 8:21 am |
|
|
|
JLACOUR
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:18 pm
Posts: 4915
Location: Lake Jackson, TX
|
Re: transom saver
_________________
37 PD EFI FPR 18x48 Tiller
SOLD -- 36 PD EFI FPR 18x48 Stick Steer
SOLD -- 27 PD FPR 16x36 Skiff
|
| Sat Oct 26, 2013 8:25 am |
|
|
|
eljefe
MMT Elite Member
Joined: Thu Jan 13, 2011 7:32 am
Posts: 5210
Location: Beaumont Texas
|
Re: transom saver Mine just flopped around... never had any problems and thats driving down potholed ranch roads....also with it flopping around you wont have anybody tailgating. .....  sent from the former Republic of Texas.
_________________
You can't see the sunrise if your eyes are closed.
dying aint much of a livin....
Black ops IITX marshstalker
1840 WC www.wccustomboats.com
fuel injected 25 GTR
|
| Sun Oct 27, 2013 9:37 am |
|
|
|
ROGER504
MMT Pro Member
Joined: Sat Sep 18, 2010 11:20 am
Posts: 52
Location: METAIRIE, LA
|
Re: transom saver
_________________
1648 GDSD WITH 36PD
|
| Tue Oct 29, 2013 2:40 pm |
|
|
|
ROGER504
MMT Pro Member
Joined: Sat Sep 18, 2010 11:20 am
Posts: 52
Location: METAIRIE, LA
|
Re: transom saver I forgot to get back on here about transom saver. I did get it from corey at cotton mouth. easy install, adjust length & drill 2 holes done. it works great, very strong and nicely built. very easy to put on and off. very nice people to deal with, worth every penny.
_________________
1648 GDSD WITH 36PD
|
| Thu Nov 21, 2013 10:28 am |
|
|
|
banded-mallard
MMT 1000 Club
Joined: Wed Oct 07, 2009 8:18 pm
Posts: 4310
|
Re: transom saver
|
| Thu Nov 21, 2013 11:47 am |
|
|
|
SCSuperfly
MMT Pro Member
Joined: Fri Nov 25, 2011 1:24 am
Posts: 466
|
Re: transom saver Pics would be cool.
_________________
Modded 36 PD draggin' around an 1848 PD boat backwards!
|
| Sat Nov 23, 2013 7:53 pm |
|
|
|
thirdtimesacharm
MMT Sponsor
Joined: Sun Sep 11, 2011 11:33 am
Posts: 309
|
Re: transom saver Sorry been real busy in the shop.
_________________
Corey Crochet
Cottonmouth Custom Boats, LLC
225-456-0930
|
| Sun Nov 24, 2013 7:42 am |
|
|
|
ROGER504
MMT Pro Member
Joined: Sat Sep 18, 2010 11:20 am
Posts: 52
Location: METAIRIE, LA
|
Re: transom saver WESTSIDE 003.JPG
You do not have the required permissions to view the files attached to this post.
_________________
1648 GDSD WITH 36PD
|
| Mon Nov 25, 2013 11:38 am |
|
|
|
banded-mallard
MMT 1000 Club
Joined: Wed Oct 07, 2009 8:18 pm
Posts: 4310
|
Re: transom saver I saw them on his site. I ended up making one because i have prestons skeg and wasn't sure if it would work with it. The way mine is made, I can trim down and completely take the pressure off the trim ram and the motor doesn't move. Very good idea and does work. When I hit train tracks, motor doesn't move a lick.
|
| Mon Nov 25, 2013 11:56 am |
|
|
|
Quackhead62
MMT F.E.
Joined: Fri Nov 30, 2012 7:47 pm
Posts: 931
Location: Maurice,La
|
Re: transom saver I have Bayouboys skeg and it works great. It is a damn good design and Corey is a awesome guy to deal with. The first pic is actually my motor.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
_________________
Stage 2 36 HP Pro-Drive FPR W/ Bayou Boys Custom Skeg,Cave Plate,and Weed Cutter with MAC Exhaust
Pushing a 17X54 Pro-Drive X-Series boat
|
| Mon Nov 25, 2013 7:41 pm |
|
|
|
SCSuperfly
MMT Pro Member
Joined: Fri Nov 25, 2011 1:24 am
Posts: 466
|
Re: transom saver I am diggin' the this thing!
_________________
Modded 36 PD draggin' around an 1848 PD boat backwards!
|
| Wed Dec 04, 2013 7:08 pm |
|
|
|
JIMMY W
MMT 1000 Club
Joined: Tue Jan 13, 2009 8:02 pm
Posts: 4534
Location: South Louisiana
|
Re: transom saver Fuking Rookies
_________________
17/54 GT EXTREME Center Console, Huntdeck w/ GTR 35
Hoyt Mods and some other goodies
|
| Fri Dec 06, 2013 2:53 pm |
|
|
|
