| Author |
Message |
|
supercajun
MMT Pro Member
Joined: Sun Jan 09, 2011 9:02 pm
Posts: 219
|
 go devil seals Where can I get seals for a 9hp go devil? I know you can call go devil with a serial number but this frame dosent have one. The frame was my grandpaws and he told me he bought it from them 20plus years ago. I put my caliper on the bushings and got those locally but can't find seals.
|
| Mon Oct 28, 2013 10:57 am |
|
|
|
270Handiman
MMT 1000 Club
Joined: Thu Dec 29, 2011 10:46 pm
Posts: 2342
Location: Mandeville, LA
|
Re: go devil seals My 9 hp GD I bought 20 years ago had the serial number stamped into the frame. Call GD and tell them what you have. Bet they will help you out.
|
| Mon Oct 28, 2013 11:03 am |
|
|
|
shooter
MMT Pro Member
Joined: Wed Jul 21, 2010 5:59 pm
Posts: 406
|
Re: go devil seals I found a brand new set of seals in my cabinet, bought them for my 25 longtail but never used them. Any chance they're the same seals? If so, you can have 'em.
Send me some dimensions on what you've got.
_________________
32 PD with EVT cam, decked heads, shaved pistons and not enough sense to leave things alone!
|
| Mon Oct 28, 2013 1:15 pm |
|
|
|
Trousertrout
MMT 1000 Club
Joined: Tue Oct 18, 2011 3:18 pm
Posts: 1060
Location: Ohio-The land of few ducks
|
Re: go devil seals ^^^^ you are a mans man. My wife would never allow me to keep mm parts in the kitchen cabinets
_________________
23 swomp/ 1542 tracker
|
| Mon Oct 28, 2013 2:31 pm |
|
|
|
supercajun
MMT Pro Member
Joined: Sun Jan 09, 2011 9:02 pm
Posts: 219
|
Re: go devil seals
|
| Mon Oct 28, 2013 5:36 pm |
|
|
|
shooter
MMT Pro Member
Joined: Wed Jul 21, 2010 5:59 pm
Posts: 406
|
Re: go devil seals Damn, these are for a 3/4" shaft. Sorry.
_________________
32 PD with EVT cam, decked heads, shaved pistons and not enough sense to leave things alone!
|
| Tue Oct 29, 2013 10:21 am |
|
|
|
poke_chop666
MMT Pro Member
Joined: Sat Apr 06, 2013 12:07 am
Posts: 487
Location: port barre,la
|
Re: go devil seals Shooter whrre you from? Is that upper or lower seals? Ill buy my own but do u have a part number I can try to get mine locally
_________________
25 yamaha pushing a 1642 welded flat
20 hp go-devil longtail for hunting.
|
| Mon Nov 25, 2013 10:23 am |
|
|
|
shooter
MMT Pro Member
Joined: Wed Jul 21, 2010 5:59 pm
Posts: 406
|
Re: go devil seals
_________________
32 PD with EVT cam, decked heads, shaved pistons and not enough sense to leave things alone!
|
| Mon Nov 25, 2013 5:27 pm |
|
|
|
poke_chop666
MMT Pro Member
Joined: Sat Apr 06, 2013 12:07 am
Posts: 487
Location: port barre,la
|
Re: go devil seals Whos coco? Im just trying to get a part number to cross referrence
_________________
25 yamaha pushing a 1642 welded flat
20 hp go-devil longtail for hunting.
|
| Mon Nov 25, 2013 8:27 pm |
|
|
|
kibb
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:58 pm
Posts: 2731
Location: Lafayette, LA
|
Re: go devil seals The guy who owns Go-Devil.
_________________
1644 WeldCraft / 27 GDLT
Ranger R71 / 125 Merc
|
| Mon Nov 25, 2013 8:38 pm |
|
|
|
kibb
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:58 pm
Posts: 2731
Location: Lafayette, LA
|
Re: go devil seals
_________________
1644 WeldCraft / 27 GDLT
Ranger R71 / 125 Merc
|
| Mon Nov 25, 2013 8:41 pm |
|
|
|
swamp_fox
MMT Pro Member
Joined: Tue Oct 08, 2013 5:39 pm
Posts: 265
Location: St.Amant, LA
|
Re: go devil seals Yep, call go-devil. Those shouldn't have changed much through the years.
_________________
17'Extreme Metal Fab. Skiff - 23 GDLT
|
| Mon Nov 25, 2013 8:41 pm |
|
|
|
da go get'er
MMT 1000 Club
Joined: Wed Oct 27, 2010 8:30 am
Posts: 3406
Location: Prairieville
|
Re: go devil seals
_________________
17*38 Klibert 23GDLT
I toast to staying positive and testing negative!
|
| Mon Nov 25, 2013 9:55 pm |
|
|
|
poke_chop666
MMT Pro Member
Joined: Sat Apr 06, 2013 12:07 am
Posts: 487
Location: port barre,la
|
Re: go devil seals Go devil wont give me a part number. I was gonna go 5o OReilly or something and try to get it
_________________
25 yamaha pushing a 1642 welded flat
20 hp go-devil longtail for hunting.
|
| Tue Nov 26, 2013 8:01 am |
|
|
|
kibb
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:58 pm
Posts: 2731
Location: Lafayette, LA
|
Re: go devil seals They won't give anything if you don't have a serial number.
_________________
1644 WeldCraft / 27 GDLT
Ranger R71 / 125 Merc
|
| Tue Nov 26, 2013 8:13 am |
|
|
|
shooter
MMT Pro Member
Joined: Wed Jul 21, 2010 5:59 pm
Posts: 406
|
Re: go devil seals OK, I've got a bag of 3/4" seals that I labeled Go-Devil shaft seals (wrong ones) that have the following markings on them: TAIWAN TOM 075112 TOY. I got these from GD but they weren't the ones I had ordered.
I also have a bag of 3/4" seals I labeled #4B Lower Seals, P/N 20810-LPDW.
That's all I know about them. You can have them if they'll help you.
_________________
32 PD with EVT cam, decked heads, shaved pistons and not enough sense to leave things alone!
|
| Tue Nov 26, 2013 9:59 am |
|
|
|
poke_chop666
MMT Pro Member
Joined: Sat Apr 06, 2013 12:07 am
Posts: 487
Location: port barre,la
|
Re: go devil seals I had serial number and all and she was like all I can tell you is our part number which is 7 lol.
_________________
25 yamaha pushing a 1642 welded flat
20 hp go-devil longtail for hunting.
|
| Wed Nov 27, 2013 6:45 am |
|
|
|
kibb
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:58 pm
Posts: 2731
Location: Lafayette, LA
|
Re: go devil seals I'm pretty sure the seals are proprietary. I think they have someone make the seals just for them.
_________________
1644 WeldCraft / 27 GDLT
Ranger R71 / 125 Merc
|
| Wed Nov 27, 2013 7:51 am |
|
|
|
Mark F. Cheney
MMT Pro Member
Joined: Sat Mar 07, 2009 9:44 am
Posts: 154
Location: Bountiful, Utah
|
Re: go devil seals seals are simple. Get an SKF seal book from Kaman and match up your ID, OD, and lip construction and you will be set to go. They really arn't very expensive.
Mark F. Cheney
_________________
on the Great Salt Lake marsh
|
| Thu Dec 12, 2013 11:35 pm |
|
|
|
shooter
MMT Pro Member
Joined: Wed Jul 21, 2010 5:59 pm
Posts: 406
|
Re: go devil seals Thanks for the tip! SKF actually has android and iPhone apps for both seals and bearings.
_________________
32 PD with EVT cam, decked heads, shaved pistons and not enough sense to leave things alone!
|
| Fri Dec 13, 2013 12:02 am |
|
|
|
