Author |
Message |
The Hairy Coot
MMT Addict
Joined: Wed Aug 28, 2013 10:40 pm Posts: 717 Location: Louisiana
|
 Gator Tail Gearing Sprokets
Being unfamiliar with Gator Tail, and the lack of this detail on their website, I take it you can swap gearing and ratios like you can with a MB? If so, where can you buy those gears and find out more info? I did a search on here and the only thing that comes up with 'gear' is hunting gear.
Sent from my iPad using Tapatalk HD
|
Mon Feb 10, 2014 9:02 pm |
|
 |
autogateman
MMT Sponsor
Joined: Thu Sep 16, 2010 10:32 pm Posts: 4036 Location: Gonzales La
|
 Re: Gator Tail Gearing Sprokets
The hard part about changing gears on a gator tail is that you would have to shim the motor to accommodate the belt tension or change the top and bottom together. You also have brake caliper clearance issues to consider when you go moving the engine up to tighten the belt. Or get a new belt to match exactly.
|
Mon Feb 10, 2014 9:35 pm |
|
 |
The Hairy Coot
MMT Addict
Joined: Wed Aug 28, 2013 10:40 pm Posts: 717 Location: Louisiana
|
 Re: Gator Tail Gearing Sprokets
Anyone on here done it?
Sent from my iPad using Tapatalk HD
|
Mon Feb 10, 2014 9:37 pm |
|
 |
cupped up
MMT 1000 Club
Joined: Tue Jun 05, 2012 7:25 pm Posts: 4205 Location: St. Amant, LA
|
 Re: Gator Tail Gearing Sprokets
They only have 2 different ratios...old one was lower new one is higher. I'm not sure if you can still get the old gear from them or not, I'm sure they have some. And the difference is the bottom gear, there's only one top.
So to answer your question, no you can't really change ratios like a MB.
|
Tue Feb 11, 2014 9:47 am |
|
 |
Richard in LA
MMT Pro Member
Joined: Tue Sep 08, 2009 1:58 am Posts: 282 Location: Prairieville, LA
|
 Re: Gator Tail Gearing Sprokets
They still have the 45T, I bought one not too long ago to replace a worn one.
_________________ GTR, Waitin' on a DFOU hull
|
Tue Feb 11, 2014 3:08 pm |
|
 |
autogateman
MMT Sponsor
Joined: Thu Sep 16, 2010 10:32 pm Posts: 4036 Location: Gonzales La
|
 Re: Gator Tail Gearing Sprokets
I run the 45 on mine
|
Tue Feb 11, 2014 8:54 pm |
|
 |
The Hairy Coot
MMT Addict
Joined: Wed Aug 28, 2013 10:40 pm Posts: 717 Location: Louisiana
|
 Re: Gator Tail Gearing Sprokets
|
Wed Feb 12, 2014 8:09 pm |
|
 |
pokey79
MMT 1000 Club
Joined: Mon Nov 15, 2010 4:50 pm Posts: 2282 Location: Circumcised, Louisiana
|
 Re: Gator Tail Gearing Sprokets
the new gear ratio is 1.263 to 1 and that's a 38 top and 48 bottom but I think I have that wrong cause it might be a 47 bottom and that would be 1.236 to 1
|
Wed Feb 12, 2014 8:57 pm |
|
 |
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm Posts: 7064 Location: Mallard country
|
 Re: Gator Tail Gearing Sprokets
No it's a 48 tooth
|
Wed Feb 12, 2014 9:36 pm |
|
 |
The Hairy Coot
MMT Addict
Joined: Wed Aug 28, 2013 10:40 pm Posts: 717 Location: Louisiana
|
 Re: Gator Tail Gearing Sprokets
|
Wed Feb 12, 2014 9:38 pm |
|
 |
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm Posts: 7064 Location: Mallard country
|
 Gator Tail Gearing Sprokets
My belt housing has 48t stamped in it Which would mean higher geared
|
Wed Feb 12, 2014 9:45 pm |
|
 |
The Hairy Coot
MMT Addict
Joined: Wed Aug 28, 2013 10:40 pm Posts: 717 Location: Louisiana
|
 Re: Gator Tail Gearing Sprokets
|
Wed Feb 12, 2014 9:46 pm |
|
 |
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm Posts: 7064 Location: Mallard country
|
 Re: Gator Tail Gearing Sprokets
Yes sorry Lower is correct had a brain fart! Was editing my post but my phone rang before I could delete it and start over 
|
Wed Feb 12, 2014 10:10 pm |
|
 |
270Handiman
MMT 1000 Club
Joined: Thu Dec 29, 2011 10:46 pm Posts: 2342 Location: Mandeville, LA
|
 Re: Gator Tail Gearing Sprokets
Yes....the 48 is a 'shorter' gear and will increase low end pull.
|
Wed Feb 12, 2014 10:15 pm |
|
 |
The Hairy Coot
MMT Addict
Joined: Wed Aug 28, 2013 10:40 pm Posts: 717 Location: Louisiana
|
 Re: Gator Tail Gearing Sprokets
Are the 45 and 48 interchangeable? Any plans of a 50?
Sent from my iPad using Tapatalk HD
|
Thu Feb 13, 2014 10:29 pm |
|
 |
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm Posts: 7064 Location: Mallard country
|
 Re: Gator Tail Gearing Sprokets
Yes I believe you can interchange them and I can see possibly a lower gear in the future
|
Thu Feb 13, 2014 10:32 pm |
|
 |
pokey79
MMT 1000 Club
Joined: Mon Nov 15, 2010 4:50 pm Posts: 2282 Location: Circumcised, Louisiana
|
 Re: Gator Tail Gearing Sprokets
|
Fri Feb 14, 2014 6:43 am |
|
 |
pokey79
MMT 1000 Club
Joined: Mon Nov 15, 2010 4:50 pm Posts: 2282 Location: Circumcised, Louisiana
|
 Re: Gator Tail Gearing Sprokets
so all u have to do is change the 48 in the part number to say 50 and then u have a 50 groove pulley
|
Fri Feb 14, 2014 6:45 am |
|
 |
dfou
MMT 1000 Club
Joined: Sun Dec 12, 2010 12:38 am Posts: 3986 Location: Pville, La
|
 Re: Gator Tail Gearing Sprokets
Have any of y'all actually changed them? Mine would require a different belt to go to a bigger gear. Not enough adjustment.
Sent from my iPhone using Tapatalk
|
Fri Feb 14, 2014 7:44 am |
|
 |
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm Posts: 7064 Location: Mallard country
|
 Re: Gator Tail Gearing Sprokets
From my understanding it's the same belt. And yes I know some that has played around with the 2
|
Fri Feb 14, 2014 8:26 am |
|
 |
dfou
MMT 1000 Club
Joined: Sun Dec 12, 2010 12:38 am Posts: 3986 Location: Pville, La
|
 Re: Gator Tail Gearing Sprokets
When I talked to gator tail I was told I would have to change my belt housing. Said they make 2 lengths.
Sent from my iPhone using Tapatalk
|
Fri Feb 14, 2014 8:28 am |
|
 |
The Hairy Coot
MMT Addict
Joined: Wed Aug 28, 2013 10:40 pm Posts: 717 Location: Louisiana
|
 Re: Gator Tail Gearing Sprokets
|
Fri Feb 14, 2014 8:57 am |
|
 |
Jamie B.
MMT 1000 Club
Joined: Tue May 19, 2009 9:48 am Posts: 2688
|
 Re: Gator Tail Gearing Sprokets
|
Fri Feb 14, 2014 9:47 am |
|
 |
dfou
MMT 1000 Club
Joined: Sun Dec 12, 2010 12:38 am Posts: 3986 Location: Pville, La
|
 Re: Gator Tail Gearing Sprokets
|
Fri Feb 14, 2014 10:30 am |
|
 |
Jamie B.
MMT 1000 Club
Joined: Tue May 19, 2009 9:48 am Posts: 2688
|
 Re: Gator Tail Gearing Sprokets
If you could find a belt that was a 1/4" longer then I think it would work.
|
Fri Feb 14, 2014 4:26 pm |
|
 |
|