FAQ • Login
It is currently Sat Jun 21, 2025 3:34 am




Reply to topic  Page 1 of 1
  [ 15 posts ] 
Print view Previous topic | Next topic 
 2014 Gen III Pro Drive on 18x54 mad man custom 
Author Message
teammarshmafia
MMT Pro Member
User avatar

Joined: Tue May 14, 2013 2:18 pm
Posts: 478
Location: southeast, Louisiana
Post 2014 Gen III Pro Drive on 18x54 mad man custom
MM Brand:Pro Drive
Horsepower:36
Boat Brand:Mad Man Customs
Boat Size: 18x54
Boat Layout: 5 ft front deck, hunt deck in rear, 4" catwalks, 7' rod box on starboard side.
Speeds Shallow Water:
Speeds Deep Water:26 mph @ 4200 rpms
Total Boat Load With Gear Etc:myself (245lbs), my dad (300lbs), my 2 yr old son (35lbs), 6 gal of gas, minn kota 101lb thrust trollin motor, 3 batteries (2 deep cycle and 1 cranking batt.)
Conditions Tested In: light current, little to no wind, and deep water
Speeds deep water: 27mph @ 4300rpms
Total boat load: everything listed above minus my dad and my son.
Comments: didnt get to run it in shallow water yet or vary my load any.

_________________
Gen III Pro Drive with a JBP stage 2 pushin 18x54 madmancustom
Jus nut up and grab a handful of throttle

Fri Mar 14, 2014 11:11 am
Profile
teammarshmafia
MMT Pro Member
User avatar

Joined: Tue May 14, 2013 2:18 pm
Posts: 478
Location: southeast, Louisiana
Post Re: 2014 Gen III Pro Drive on 18x54 mad man custom
Ill have more information to post as I run it


You do not have the required permissions to view the files attached to this post.
_________________
Gen III Pro Drive with a JBP stage 2 pushin 18x54 madmancustom
Jus nut up and grab a handful of throttle

Fri Mar 14, 2014 11:19 am
Profile
bayouboy
MMT Elite Member
User avatar

Joined: Tue Jan 13, 2009 6:08 pm
Posts: 5376
Location: Venice, La
Post Re: 2014 Gen III Pro Drive on 18x54 mad man custom
Congrats, Nice Rig for sure.
Fri Mar 14, 2014 11:26 am
Profile
Will
MMT Elite Member

Joined: Fri Jul 08, 2011 1:54 pm
Posts: 8133
Post Re: 2014 Gen III Pro Drive on 18x54 mad man custom
Can you post some pictures of the hull and the layout? Sounds like a good set up.

_________________
Before the internet, the majority of the village idiots stayed in their villages.

Fri Mar 14, 2014 11:44 am
Profile
teammarshmafia
MMT Pro Member
User avatar

Joined: Tue May 14, 2013 2:18 pm
Posts: 478
Location: southeast, Louisiana
Post Re: 2014 Gen III Pro Drive on 18x54 mad man custom
Pics of boat


You do not have the required permissions to view the files attached to this post.
_________________
Gen III Pro Drive with a JBP stage 2 pushin 18x54 madmancustom
Jus nut up and grab a handful of throttle

Fri Mar 14, 2014 1:29 pm
Profile
fowllife08
MMT 1000 Club
User avatar

Joined: Sun Sep 18, 2011 7:25 pm
Posts: 3676
Location: down in da flats, LA
Post Re: 2014 Gen III Pro Drive on 18x54 mad man custom
Just curious if your gdsd was faster?

_________________
35 GTR chasin a BBC 1848

Fri Mar 14, 2014 1:44 pm
Profile
teammarshmafia
MMT Pro Member
User avatar

Joined: Tue May 14, 2013 2:18 pm
Posts: 478
Location: southeast, Louisiana
Post Re: 2014 Gen III Pro Drive on 18x54 mad man custom
Running light yes it was, but with a load no it wasn't and im almost always carrying a load. With load described above the go devil would only do about 23mph and with a light load it would run 28

_________________
Gen III Pro Drive with a JBP stage 2 pushin 18x54 madmancustom
Jus nut up and grab a handful of throttle

Fri Mar 14, 2014 2:19 pm
Profile
fowllife08
MMT 1000 Club
User avatar

Joined: Sun Sep 18, 2011 7:25 pm
Posts: 3676
Location: down in da flats, LA
Post Re: 2014 Gen III Pro Drive on 18x54 mad man custom
Cool, congrats on the motor.

_________________
35 GTR chasin a BBC 1848

Fri Mar 14, 2014 2:22 pm
Profile
pintail_89
MMT 1000 Club

Joined: Sat Jun 15, 2013 10:00 am
Posts: 2047
Post Re: 2014 Gen III Pro Drive on 18x54 mad man custom
good lookin rig man, i got one from him too, wish i would have gotten catwalks as well, they look real good, specially with those lights

_________________
19x48 MAD MAN CUSTOMS 36PD (stock for now)

Fri Mar 14, 2014 7:17 pm
Profile
doubleBanded
MMT 1000 Club
User avatar

Joined: Sun Feb 03, 2013 1:26 pm
Posts: 3084
Location: Down South
Post Re: 2014 Gen III Pro Drive on 18x54 mad man custom
Congrats nice rig

_________________
1852 Dfou custom 35gtr

Sat Mar 15, 2014 7:27 am
Profile
Buzz Killington
MMT 1000 Club

Joined: Tue Jan 10, 2012 12:33 pm
Posts: 2455
Post Re: 2014 Gen III Pro Drive on 18x54 mad man custom
Very nice

_________________
Support your troops - they support you

B. MacDonald

Sat Mar 15, 2014 8:17 pm
Profile
WhoDat88
MMT 1000 Club

Joined: Thu May 23, 2013 4:24 pm
Posts: 2912
Location: Thibodaux, La
Post Re: 2014 Gen III Pro Drive on 18x54 mad man custom
Bad ass looking rigs . That's some good speed with a load

_________________
1850 Predator Series Stick Steer Option
40HP Gatortail

Sat Mar 15, 2014 8:31 pm
Profile WWW
Frog
MMT Sponsor
User avatar

Joined: Mon Jun 13, 2011 8:49 am
Posts: 3260
Post Re: 2014 Gen III Pro Drive on 18x54 mad man custom
Congrats, nice ride

_________________
http://www.gatorglide.com/

gatorheads@comcast.net

Sun Mar 16, 2014 11:24 am
Profile WWW
teammarshmafia
MMT Pro Member
User avatar

Joined: Tue May 14, 2013 2:18 pm
Posts: 478
Location: southeast, Louisiana
Post Re: 2014 Gen III Pro Drive on 18x54 mad man custom
Got to run the new pro drive on my lease in delacroix. Got some shallow water speeds and some loaded down speeds.
Shallow water with light load was solid 27 mph.

We took it bowfishing friday night and had 4 people(250, 290, 200, 160), 150 qt ice chestw/40lbs of ice, bows light bar, 12 gal of gas, and 3 batteries. And boat got on plane and ran 22 mph. In deep water. I was blown away!
We shot about 300 lbs of fish friday night and on way back had a little trouble getting it to plane out but eventually it did and did 16mph on the way back in.

_________________
Gen III Pro Drive with a JBP stage 2 pushin 18x54 madmancustom
Jus nut up and grab a handful of throttle

Tue Mar 25, 2014 9:49 am
Profile
teammarshmafia
MMT Pro Member
User avatar

Joined: Tue May 14, 2013 2:18 pm
Posts: 478
Location: southeast, Louisiana
Post Re: 2014 Gen III Pro Drive on 18x54 mad man custom
https://www.youtube.com/watch?v=FKm5ENi ... ata_player

_________________
Gen III Pro Drive with a JBP stage 2 pushin 18x54 madmancustom
Jus nut up and grab a handful of throttle

Tue Mar 25, 2014 6:20 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   Page 1 of 1
  [ 15 posts ] 

Board index » MMT Main Forums » Reviews - Boats & Motors - REVIEWS ONLY

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 51 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: