Author |
Message |
THE TANK
MMT 1000 Club
Joined: Wed Mar 04, 2009 7:34 pm Posts: 1080 Location: Coteau Homles, La
|
 Re: Mac exhaust thread
This is my belief, how can some of you guys put something down when you never saw it are heard it run and perform? I ran it and really like the sound and the way it looks. The best thing that MAC is doing is putting the hours on it and see how long it last, some of the other exhaust company's don't test enough to know what they have. The MAC exhaust is on two Crawfishermens boats that put 8-10 hours a day in the swamp running the shit out of it, that's the best test if you want to find out of its going to last. Guys, where the positive feed back on something that might just be better built then the other exhaust out there. The Q don't last but 100 hours and the MM you lucky if you get 50 hours out of it before it cracks or a pipe breaks off, and lets not forget about the EVT that cracks also I know I had them all, so don't knock something till you try it. I can tell you this its better built then the others and the bracket is 10 gauge 304 stainless with (8) 5/16 bolts holding the main support of it under the exhaust can, not including the other 6 bolts that bolt the bracket to the engine. It was told to me that everyone that saw it likes the design and the sound of it. So with all this being said it will be coming out soon to a little town near the mud motor capital of the world! 
|
Tue Apr 15, 2014 3:28 pm |
|
 |
msm8281
MMT Elite Member
Joined: Fri Oct 09, 2009 1:50 pm Posts: 9673 Location: New Iberia, La.
|
 Re: Mac exhaust thread
Cool
|
Tue Apr 15, 2014 3:32 pm |
|
 |
deltaduckmaster
MMT Sponsor
Joined: Tue Jan 13, 2009 7:07 pm Posts: 16608
|
 Re: Mac exhaust thread
Any on motors with mods. That's were I seen most fail. Stock motors they tend to last
Sent from my iPhone using Tapatalk
_________________ 17x48 extreme stage 2 GTR 20X60 DUAL RIG BOWFISHING ADDITION http://www.scalesandtailsbowfishing.com
|
Tue Apr 15, 2014 3:39 pm |
|
 |
deltaduckmaster
MMT Sponsor
Joined: Tue Jan 13, 2009 7:07 pm Posts: 16608
|
 Re: Mac exhaust thread
He put any In salt water conditions yet. My stainless Briggs ones catch hell on my boat.
Sent from my iPhone using Tapatalk
_________________ 17x48 extreme stage 2 GTR 20X60 DUAL RIG BOWFISHING ADDITION http://www.scalesandtailsbowfishing.com
|
Tue Apr 15, 2014 3:41 pm |
|
 |
JLACOUR
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:18 pm Posts: 4915 Location: Lake Jackson, TX
|
 Re: Mac exhaust thread
_________________ 37 PD EFI FPR 18x48 Tiller SOLD -- 36 PD EFI FPR 18x48 Stick Steer SOLD -- 27 PD FPR 16x36 Skiff
|
Tue Apr 15, 2014 3:45 pm |
|
 |
THE TANK
MMT 1000 Club
Joined: Wed Mar 04, 2009 7:34 pm Posts: 1080 Location: Coteau Homles, La
|
 Re: Mac exhaust thread
|
Tue Apr 15, 2014 3:45 pm |
|
 |
THE TANK
MMT 1000 Club
Joined: Wed Mar 04, 2009 7:34 pm Posts: 1080 Location: Coteau Homles, La
|
 Re: Mac exhaust thread
|
Tue Apr 15, 2014 3:47 pm |
|
 |
LA Prop
MMT Sponsor
Joined: Sat Feb 01, 2014 6:31 pm Posts: 1008
|
 Re: Mac exhaust thread
Ddm im putting one on my motor this week ill put 200 hours on it in no time crawfishing with a lil abuse in other words im trying to break it to find the weak link and let the guys at mac know whats good and what needs work.
_________________ 20' homemade skiff with a stage 2 gtr
|
Tue Apr 15, 2014 4:03 pm |
|
 |
LA Prop
MMT Sponsor
Joined: Sat Feb 01, 2014 6:31 pm Posts: 1008
|
 Re: Mac exhaust thread
Tank I like the way it sounds on your boat has a little rumble but not to loud. That bracket is thick though how heavy is it I know itll hold longer than a mm
_________________ 20' homemade skiff with a stage 2 gtr
|
Tue Apr 15, 2014 4:05 pm |
|
 |
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm Posts: 763
|
 Re: Mac exhaust thread
If the tank is running it it must be tough I rode with him through cypress swamp 4-6 inches deep smoking stumps every couple feet and never letting off. Hitting the rev limiter the entire time his boat is called the tank for a reason how that motor is still on one piece I don't know and it ain't no turtle either he never turns it more than 4300 so say
_________________ 2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
Tue Apr 15, 2014 5:14 pm |
|
 |
THE TANK
MMT 1000 Club
Joined: Wed Mar 04, 2009 7:34 pm Posts: 1080 Location: Coteau Homles, La
|
 Re: Mac exhaust thread
I was running it, but had to give it up to another craw fishermen so he can put more hours on it. They will have another for me by the weekend I hope.
Sent from da woods!
You do not have the required permissions to view the files attached to this post.
|
Tue Apr 15, 2014 6:27 pm |
|
 |
fowllife08
MMT 1000 Club
Joined: Sun Sep 18, 2011 7:25 pm Posts: 3676 Location: down in da flats, LA
|
 Re: Mac exhaust thread
Damn tank i almost got excited at first glimpse of ur pic lol.
_________________ 35 GTR chasin a BBC 1848
|
Tue Apr 15, 2014 6:37 pm |
|
 |
BayouBuster
MMT 1000 Club
Joined: Sat Jun 25, 2011 8:33 am Posts: 1352 Location: Genoa AR
|
 Re: Mac exhaust thread
Let me run one for 50 hours up here, I wanna see how well it holds up to my abuse.
Sent from my SAMSUNG-SGH-I537 using Tapatalk
|
Tue Apr 15, 2014 6:41 pm |
|
 |
THE TANK
MMT 1000 Club
Joined: Wed Mar 04, 2009 7:34 pm Posts: 1080 Location: Coteau Homles, La
|
 Re: Mac exhaust thread
|
Tue Apr 15, 2014 6:42 pm |
|
 |
DUCK HEARSE
MMT 1000 Club
Joined: Fri Apr 06, 2012 8:48 am Posts: 3161 Location: Alabama
|
 Re: Mac exhaust thread
_________________ Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover. - Mark Twain
|
Tue Apr 15, 2014 6:46 pm |
|
 |
THE TANK
MMT 1000 Club
Joined: Wed Mar 04, 2009 7:34 pm Posts: 1080 Location: Coteau Homles, La
|
 Re: Mac exhaust thread
|
Tue Apr 15, 2014 6:54 pm |
|
 |
fowllife08
MMT 1000 Club
Joined: Sun Sep 18, 2011 7:25 pm Posts: 3676 Location: down in da flats, LA
|
 Re: Mac exhaust thread
I know bud, been hearing that. From what im hearing itll be worth it.
_________________ 35 GTR chasin a BBC 1848
|
Tue Apr 15, 2014 6:57 pm |
|
 |
DUCK HEARSE
MMT 1000 Club
Joined: Fri Apr 06, 2012 8:48 am Posts: 3161 Location: Alabama
|
 Re: Mac exhaust thread
You do not have the required permissions to view the files attached to this post.
_________________ Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover. - Mark Twain
|
Tue Apr 15, 2014 7:02 pm |
|
 |
THE TANK
MMT 1000 Club
Joined: Wed Mar 04, 2009 7:34 pm Posts: 1080 Location: Coteau Homles, La
|
 Re: Mac exhaust thread
|
Tue Apr 15, 2014 7:03 pm |
|
 |
Team Schmo
MMT F.E.
Joined: Sun Sep 08, 2013 8:05 pm Posts: 814 Location: Montana
|
 Re: Mac exhaust thread
Now that is impressive!!
_________________ You can't fix stupid
"As long as the dog hits the water"
" Endorsed by Drake Waterfowl, Dakota Decoy, and Rig 'em Right Waterfowl"
"Stealthcraft Boats Pro Staff"
|
Tue Apr 15, 2014 7:12 pm |
|
 |
pokey79
MMT 1000 Club
Joined: Mon Nov 15, 2010 4:50 pm Posts: 2282 Location: Circumcised, Louisiana
|
 Re: Mac exhaust thread
|
Tue Apr 15, 2014 7:47 pm |
|
 |
LA Prop
MMT Sponsor
Joined: Sat Feb 01, 2014 6:31 pm Posts: 1008
|
 Re: Mac exhaust thread
Good lawd I wanna be a distributor of them things.
_________________ 20' homemade skiff with a stage 2 gtr
|
Tue Apr 15, 2014 8:08 pm |
|
 |
lunacris
MMT 1000 Club
Joined: Thu Mar 29, 2012 8:31 pm Posts: 3251 Location: Da Parish
|
 Re: Mac exhaust thread
pic please?
_________________ GatorHide - MB
|
Tue Apr 15, 2014 8:09 pm |
|
 |
msm8281
MMT Elite Member
Joined: Fri Oct 09, 2009 1:50 pm Posts: 9673 Location: New Iberia, La.
|
 Re: Mac exhaust thread
|
Tue Apr 15, 2014 8:10 pm |
|
 |
LA Prop
MMT Sponsor
Joined: Sat Feb 01, 2014 6:31 pm Posts: 1008
|
 Re: Mac exhaust thread
_________________ 20' homemade skiff with a stage 2 gtr
|
Tue Apr 15, 2014 8:36 pm |
|
 |
LA Prop
MMT Sponsor
Joined: Sat Feb 01, 2014 6:31 pm Posts: 1008
|
 Re: Mac exhaust thread
_________________ 20' homemade skiff with a stage 2 gtr
|
Tue Apr 15, 2014 8:48 pm |
|
 |
Gameover
MMT 1000 Club
Joined: Tue Jan 03, 2012 9:06 am Posts: 3673 Location: Prarieville,LA
|
 Re: Mac exhaust thread
i must of missed something, what the hell is a mac exhaust and who is making them.. 
_________________ 1754 GTR Xtreme CC w/ Purple Kool-aid Additives
Never Forget our Fallen Soliders
|
Wed Apr 16, 2014 5:55 am |
|
 |
fowllife08
MMT 1000 Club
Joined: Sun Sep 18, 2011 7:25 pm Posts: 3676 Location: down in da flats, LA
|
 Re: Mac exhaust thread
_________________ 35 GTR chasin a BBC 1848
|
Wed Apr 16, 2014 5:56 am |
|
 |
Gameover
MMT 1000 Club
Joined: Tue Jan 03, 2012 9:06 am Posts: 3673 Location: Prarieville,LA
|
 Re: Mac exhaust thread
something that is being worked on maybe come to market we not sure cant post pictures, will be better than anything else on market and is the greatest thing since slice bread? so we are talking about a mud buddy? 
_________________ 1754 GTR Xtreme CC w/ Purple Kool-aid Additives
Never Forget our Fallen Soliders
|
Wed Apr 16, 2014 6:01 am |
|
 |
fowllife08
MMT 1000 Club
Joined: Sun Sep 18, 2011 7:25 pm Posts: 3676 Location: down in da flats, LA
|
 Re: Mac exhaust thread
Nooooo
_________________ 35 GTR chasin a BBC 1848
|
Wed Apr 16, 2014 6:08 am |
|
 |
LA Prop
MMT Sponsor
Joined: Sat Feb 01, 2014 6:31 pm Posts: 1008
|
 Re: Mac exhaust thread
Its almost better than EFI 
_________________ 20' homemade skiff with a stage 2 gtr
|
Wed Apr 16, 2014 6:51 am |
|
 |
CootSlayerRMFT
MMT Elite Member
Joined: Thu Feb 02, 2012 12:53 am Posts: 7565 Location: Prairieville, LA
|
 Re: Mac exhaust thread
It's almost as durable as cast aluminum!  Sent from my iPhone using Tapatalk
|
Wed Apr 16, 2014 7:07 am |
|
 |
lunacris
MMT 1000 Club
Joined: Thu Mar 29, 2012 8:31 pm Posts: 3251 Location: Da Parish
|
 Re: Mac exhaust thread
_________________ GatorHide - MB
|
Wed Apr 16, 2014 8:17 am |
|
 |
Will
MMT Elite Member
Joined: Fri Jul 08, 2011 1:54 pm Posts: 8133
|
 Re: Mac exhaust thread
_________________ Before the internet, the majority of the village idiots stayed in their villages.
|
Wed Apr 16, 2014 8:29 am |
|
 |
LA Prop
MMT Sponsor
Joined: Sat Feb 01, 2014 6:31 pm Posts: 1008
|
 Re: Mac exhaust thread
_________________ 20' homemade skiff with a stage 2 gtr
|
Wed Apr 16, 2014 9:56 am |
|
 |
LA Prop
MMT Sponsor
Joined: Sat Feb 01, 2014 6:31 pm Posts: 1008
|
 Re: Mac exhaust thread
_________________ 20' homemade skiff with a stage 2 gtr
|
Wed Apr 16, 2014 9:56 am |
|
 |
THE TANK
MMT 1000 Club
Joined: Wed Mar 04, 2009 7:34 pm Posts: 1080 Location: Coteau Homles, La
|
 Re: Mac exhaust thread
|
Wed Apr 16, 2014 10:48 am |
|
 |
LA Prop
MMT Sponsor
Joined: Sat Feb 01, 2014 6:31 pm Posts: 1008
|
 Re: Mac exhaust thread
_________________ 20' homemade skiff with a stage 2 gtr
|
Wed Apr 16, 2014 11:40 am |
|
 |
Mudmotor Slayer
MMT 1000 Club
Joined: Tue Aug 20, 2013 12:52 pm Posts: 1783
|
 Re: Mac exhaust thread
|
Wed Apr 16, 2014 11:57 am |
|
 |
THE TANK
MMT 1000 Club
Joined: Wed Mar 04, 2009 7:34 pm Posts: 1080 Location: Coteau Homles, La
|
 Re: Mac exhaust thread
|
Wed Apr 16, 2014 12:34 pm |
|
 |
|