I have been searching for Custom boat welders and I have found a couple, but I would like to see some more options. I do not know what size boat to get because I have a 23 GD SD, but I will be using that same boat but with a GTR 35 on it eventually. If you know anyone that welds boats anywhere in the south Private message me or post pictures of your boats so I can get ideas for what I should add in mine. I would also like to hear what the must haves for hunting custom boats are and things that I can do without. I also would like to know what bow I should have. A Hybrid bow, flat bow, Godevil bow, semi v, or other. I would love to see your hulls so I can get some ideas. Thank you

Guys have stuff built all the time. I saw the thread about the motor. Just a little info for you, if you use the search function, you can find all sorts of shit. If you can't find it, use google. Type in what you want to find out and at the end put MMT. (ex. boat builders MMT) MMT went to a new server and some things won't show up through the site but will show up on google. Here is a link to the sponsors announcements, plenty builders in there. Or, just build your own like i do.

Pierce Aluminium has alot and I mean a lot of experience crimping these type of boats. Too bad it's so far away for you.

Sent from my HTC One mini using Tapatalk

Very good chance if you have the money. Call there and ask fir tookie. He can help you out.

Sent from my HTC One mini using Tapatalk

Also if I remember, each crimp was like $20 at pierce. So if you decice to do a 1 piece hull, buy a 8' x 20' sheet and have them crimp it the way you want. Hell for about another $100 in crimps, you could have side crimps, and the hull crimps. The boat would damn near be done. Cut back your rake and toe in and roll on.