| It is currently Tue Jul 01, 2025 5:13 am |
|
Page 1 of 1 |
[ 26 posts ] |
| Print view | Previous topic | Next topic |
1854 stick steer
| Author | Message |
|---|---|
|
MMT Pro Member
Joined: Sat Nov 26, 2011 5:01 pm Posts: 355 Location: larose,la. 
|
 1854 stick steerBeen working on this for a lil while.
You do not have the required permissions to view the files attached to this post. |
| Thu Nov 27, 2014 8:02 am |
|
|
|
|
MMT Pro Member
Joined: Sat Nov 26, 2011 5:01 pm Posts: 355 Location: larose,la.
|
Re: 1854 stick steer Here's a couple more.
You do not have the required permissions to view the files attached to this post. |
| Thu Nov 27, 2014 8:04 am |
|
|
|
|
MMT Pro Member
Joined: Sat Nov 26, 2011 5:01 pm Posts: 355 Location: larose,la.
|
Re: 1854 stick steer .
You do not have the required permissions to view the files attached to this post. |
| Thu Nov 27, 2014 8:06 am |
|
|
|
|
MMT 1000 Club  Joined: Thu Nov 04, 2010 7:38 am Posts: 4323 Location: Cut Off, La.
|
Re: 1854 stick steer That was the exact same idea i had when i sold my tiller PD,
I wanted to get a boat built that looked just like a traditional inboard mudboat, but with a PD hangin off the back of that bad baby! Thang looks sweet! and you know damn well its be alot more comfortable while driving for sure! _________________ Refurbishing a Prodrive |
| Thu Nov 27, 2014 8:32 am |
|
|
|
|
MMT Pro Member  Joined: Fri Oct 25, 2013 5:50 am Posts: 482 Location: South Alabama
|
Re: 1854 stick steer Fine looking rig right there. Built like a damn tank. How much does that thing weigh?
_________________ 1648 GDSD 27 GDSD |
| Thu Nov 27, 2014 10:02 am |
|
|
|
|
MMT Pro Member
Joined: Sat Nov 26, 2011 5:01 pm Posts: 355 Location: larose,la.
|
Re: 1854 stick steer Not sure I didn't try to calculate it but it's all 1/8 hull and decks .100 floor an a couple bulkheads as for the rest of the material I kept it as light as I could.
|
| Thu Nov 27, 2014 11:22 am |
|
|
|
|
MMT 1000 Club Joined: Thu Nov 04, 2010 7:38 am Posts: 4323 Location: Cut Off, La.
|
Re: 1854 stick steer _________________ Refurbishing a Prodrive |
| Thu Nov 27, 2014 11:28 am |
|
|
|
|
MMT Addict
Joined: Wed Mar 16, 2011 2:35 pm Posts: 608 Location: Deerfield Beach FL,
|
Re: 1854 stick steer Good looking boat. Keep us up on your progress.
Sent from my iPad using Tapatalk HD _________________ Swomp 35 on an 1848 Alumitec Custom |
| Thu Nov 27, 2014 11:56 am |
|
|
|
|
MMT Pro Member
Joined: Sat Nov 26, 2011 5:01 pm Posts: 355 Location: larose,la.
|
Re: 1854 stick steer Might be hard to do as it was picked up this morning , it was built for someone else.
|
| Thu Nov 27, 2014 12:48 pm |
|
|
|
|
MMT 1000 Club
Joined: Wed Jan 18, 2012 7:21 pm Posts: 2207 Location: North Alabama
|
Re: 1854 stick steer Nice looking rig! Looking forward to seeing the finished product
_________________ 2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD 2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD |
| Thu Nov 27, 2014 12:55 pm |
|
|
|
|
MMT 1000 Club
Joined: Tue May 19, 2009 9:48 am Posts: 2688
|
Re: 1854 stick steer If I was a Prodrive guy, this would be the set up I would want but in a 18x48
|
| Thu Nov 27, 2014 1:35 pm |
|
|
|
|
MMT 1000 Club
Joined: Tue May 19, 2009 9:48 am Posts: 2688
|
Re: 1854 stick steer Very nice build
|
| Thu Nov 27, 2014 1:36 pm |
|
|
|
|
MMT Pro Member
Joined: Sat Nov 26, 2011 5:01 pm Posts: 355 Location: larose,la.
|
Re: 1854 stick steer Thanks it was fun and different to do.
|
| Thu Nov 27, 2014 1:53 pm |
|
|
|
|
MMT Pro Member
Joined: Sat Nov 26, 2011 5:01 pm Posts: 355 Location: larose,la.
|
Re: 1854 stick steer Here's one more pic.
You do not have the required permissions to view the files attached to this post. |
| Thu Nov 27, 2014 1:55 pm |
|
|
|
|
MMT 1000 Club  Joined: Wed Jan 14, 2009 8:18 pm Posts: 4915 Location: Lake Jackson, TX
|
Re: 1854 stick steer Nice!!
_________________ 37 PD EFI FPR 18x48 Tiller SOLD -- 36 PD EFI FPR 18x48 Stick Steer SOLD -- 27 PD FPR 16x36 Skiff |
| Thu Nov 27, 2014 2:19 pm |
|
|
|
|
MMT Pro Member
Joined: Tue Nov 04, 2014 1:13 pm Posts: 51 Location: Bossier City, La
|
Re: 1854 stick steer I bet that rear hatch took a while, looks like 50' of weld in 4 sq ft of console. I dig the rounded corners.
|
| Thu Nov 27, 2014 4:04 pm |
|
|
|
|
MMT F.E.  Joined: Sun Sep 01, 2013 9:40 pm Posts: 888 Location: mobile alabama
|
Re: 1854 stick steer Where is the gas pedal?
_________________ 1748 Cottonmouth Hybrid Custom with a 2015 35GTR 7 yr old Boykin Spaniel One Badazz wife that that hunts like a champ ROLL TIDE!! |
| Thu Nov 27, 2014 4:48 pm |
|
|
|
|
MMT Elite Member  Joined: Mon Aug 02, 2010 8:39 pm Posts: 6976 Location: West Monroe, LA
|
Re: 1854 stick steer Sharp looking rig!!!
Sent from my beeper |
| Thu Nov 27, 2014 5:06 pm |
|
|
|
|
MMT Pro Member
Joined: Sat Nov 26, 2011 5:01 pm Posts: 355 Location: larose,la.
|
Re: 1854 stick steer No need for a gas pedal cause it looks fast
 And the rounded corners were the owners ideas they really made it look sharp. |
| Thu Nov 27, 2014 5:46 pm |
|
|
|
|
MMT F.E. Joined: Sun Sep 01, 2013 9:40 pm Posts: 888 Location: mobile alabama
|
Re: 1854 stick steer _________________ 1748 Cottonmouth Hybrid Custom with a 2015 35GTR 7 yr old Boykin Spaniel One Badazz wife that that hunts like a champ ROLL TIDE!! |
| Thu Nov 27, 2014 6:35 pm |
|
|
|
|
MMT Sponsor  Joined: Mon Jun 13, 2011 8:49 am Posts: 3260
|
Re: 1854 stick steer Cool looking rig
_________________ http://www.gatorglide.com/ gatorheads@comcast.net |
| Sun Nov 30, 2014 7:24 am |
|
|
|
|
MMT Elite Member  Joined: Tue Jan 13, 2009 6:08 pm Posts: 5376 Location: Venice, La
|
Re: 1854 stick steer Very Nice!
|
| Sun Nov 30, 2014 11:03 pm |
|
|
|
|
MMT Super Elite Member  Joined: Tue Jun 29, 2010 1:20 pm Posts: 11166 Location: Cecilia, LA
|
Re: 1854 stick steer Nice rig! Is that direct linkage steering? Might be a bit tough to steer.
_________________ Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI. “Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger. |
| Mon Dec 01, 2014 9:05 am |
|
|
|
|
MMT Pro Member
Joined: Sat Nov 26, 2011 5:01 pm Posts: 355 Location: larose,la.
|
Re: 1854 stick steer It's similar in design to the drive system on the prodrive hulls so it should be just fine unless those are hard to steer also.
|
| Mon Dec 01, 2014 9:56 am |
|
|
|
|
MMT Super Elite Member Joined: Tue Jun 29, 2010 1:20 pm Posts: 11166 Location: Cecilia, LA
|
Re: 1854 stick steer _________________ Formerly:1648 Homemade Cypress Crawfish Skiff GTR23 Performance Cam and Heads; 17x46 Gator Tail with 35GTR and Hoyt's cam;s Currently: 17x48 Gator Tail with XD40 EFI. “Wisdom is not just expertise. It is knowing how much of various areas of expertise you need to know in order to make the decisions that the world needs and that you want to do,” Columbia University President Lee Bollinger. |
| Mon Dec 01, 2014 10:27 am |
|
|
|
|
MMT 1000 Club Joined: Thu Nov 04, 2010 7:38 am Posts: 4323 Location: Cut Off, La.
|
Re: 1854 stick steer _________________ Refurbishing a Prodrive |
| Mon Dec 01, 2014 10:33 am |
|
|
|
|
|
Page 1 of 1 |
[ 26 posts ] |
|
All times are UTC - 6 hours |
Who is online |
Users browsing this forum: No registered users and 166 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |