Author |
Message |
SETx Longtail
MMT 1000 Club
Joined: Sun Sep 01, 2013 2:53 pm Posts: 3480 Location: Hardin County, Tx
|
 1760?
I'm in the market for a boat that does more than just duck hunt. I do a lot of bass fishing from Feb to the fall. I like this size hull but am curious as to why we don't see more of them around. This boat would be used in pretty much all conditions... Anybody see why not????
_________________ #CFFITR
-Custom pool noodle -stage 4 water wings
|
Wed Dec 24, 2014 2:52 pm |
|
 |
Prodigy
MMT Sponsor
Joined: Wed Jul 20, 2011 9:51 am Posts: 488
|
 Re: 1760?
Mud motor or outboard?
_________________ Prodigy Boats https://www.facebook.com/Prodigyboats www.prodigyboats.com Contact for info - http://prodigyboats.com/contact-us/ 706-253-7766
|
Wed Dec 24, 2014 3:12 pm |
|
 |
SETx Longtail
MMT 1000 Club
Joined: Sun Sep 01, 2013 2:53 pm Posts: 3480 Location: Hardin County, Tx
|
 Re: 1760?
Surface drive...
GoDevil always tells folks their 1660 is their fastest hull, and an 1860 is generally thought of to be a "tank" would one foot in the middle be some sort of middle ground??
I think a short sided 1760 would make a good all around rig, what am I missing?
_________________ #CFFITR
-Custom pool noodle -stage 4 water wings
|
Wed Dec 24, 2014 3:29 pm |
|
 |
Kcpanages
MMT Addict
Joined: Sat Dec 13, 2014 5:41 am Posts: 532
|
 Re: 1760?
|
Wed Dec 24, 2014 3:42 pm |
|
 |
SETx Longtail
MMT 1000 Club
Joined: Sun Sep 01, 2013 2:53 pm Posts: 3480 Location: Hardin County, Tx
|
 Re: 1760?
I drove an 1848 PD and stood on the deck in deep water... No thanks. Too narrow. Narrowest Id like is a 52" bottom for my purposes.
I like to fish off the deck (gear, rod/reels etc) I'm not a little dude (6ft, 250) I'm a clumsy fucker
_________________ #CFFITR
-Custom pool noodle -stage 4 water wings
|
Wed Dec 24, 2014 3:51 pm |
|
 |
Kcpanages
MMT Addict
Joined: Sat Dec 13, 2014 5:41 am Posts: 532
|
 Re: 1760?
|
Wed Dec 24, 2014 3:53 pm |
|
 |
SETx Longtail
MMT 1000 Club
Joined: Sun Sep 01, 2013 2:53 pm Posts: 3480 Location: Hardin County, Tx
|
 Re: 1760?
Yep... I only like swimming when I choose to do so 
_________________ #CFFITR
-Custom pool noodle -stage 4 water wings
|
Wed Dec 24, 2014 3:54 pm |
|
 |
Kcpanages
MMT Addict
Joined: Sat Dec 13, 2014 5:41 am Posts: 532
|
 Re: 1760?
You do not have the required permissions to view the files attached to this post.
|
Wed Dec 24, 2014 4:04 pm |
|
 |
SETx Longtail
MMT 1000 Club
Joined: Sun Sep 01, 2013 2:53 pm Posts: 3480 Location: Hardin County, Tx
|
 Re: 1760?
Yeah. If it runs 28 instead of 30, I could care less.... No way I could do a poling platform. It would get drug off in the trees lol
_________________ #CFFITR
-Custom pool noodle -stage 4 water wings
|
Wed Dec 24, 2014 4:09 pm |
|
 |
Kcpanages
MMT Addict
Joined: Sat Dec 13, 2014 5:41 am Posts: 532
|
 Re: 1760?
|
Thu Dec 25, 2014 12:18 am |
|
 |
SETx Longtail
MMT 1000 Club
Joined: Sun Sep 01, 2013 2:53 pm Posts: 3480 Location: Hardin County, Tx
|
 Re: 1760?
Any more input on this rarely seen mud boat dimension?
_________________ #CFFITR
-Custom pool noodle -stage 4 water wings
|
Fri Dec 26, 2014 6:43 pm |
|
 |
mlasal1
MMT Pro Member
Joined: Tue Nov 19, 2013 7:15 pm Posts: 59 Location: Baton rouge area
|
 Re: 1760?
I have a 1760 outboard rig. Its nice, very very stable. I bought mine used so I didn't really get to pick the exact size but if I was building a boat id build a 19x50-54 in hopes that itd ride a lil better and fit in some narrower sloughs. Mine rides pretty rough, but overall im happy with it. Lots of room, can haul a ton of weight, etc.
_________________ 19x48 rickey aucoin bateau 37efi gtr
|
Fri Dec 26, 2014 8:03 pm |
|
 |
Hernaja1
MMT 1000 Club
Joined: Tue Feb 19, 2013 11:29 am Posts: 2465 Location: Sulphur , La
|
 Re: 1760?
Why don't you look at getting an 18/60 that's what I'm leaning towards
_________________ Dual 37 EFI GTR's pushing a 20/72 , CC, point bow , Old school drake Camo Willet custom.
|
Fri Dec 26, 2014 8:34 pm |
|
 |
lunacris
MMT 1000 Club
Joined: Thu Mar 29, 2012 8:31 pm Posts: 3251 Location: Da Parish
|
 Re: 1760?
1664
she is very stable and fast for her size. I love this hull.
_________________ GatorHide - MB
|
Fri Dec 26, 2014 9:14 pm |
|
 |
Hernaja1
MMT 1000 Club
Joined: Tue Feb 19, 2013 11:29 am Posts: 2465 Location: Sulphur , La
|
 Re: 1760?
Nice rig
_________________ Dual 37 EFI GTR's pushing a 20/72 , CC, point bow , Old school drake Camo Willet custom.
|
Fri Dec 26, 2014 11:56 pm |
|
 |
deadbird8
MMT 1000 Club
Joined: Wed Feb 04, 2009 7:50 pm Posts: 3833 Location: Old East Dallas, Texas
|
 Re: 1760?
18' boat is generally the sweet spot for load carrying and performance. The wider the hull, you may consider a longer outdrive if that's an option (i.e. GatorTrax will recommend a 32" drive over a 27" to increase performance for their GatorHides which are very wide). Shorter wide boat will be stable, but you sacrifice performance, that's probably why you don't see as many of them.
_________________ Excel 1851F4 w/ MB35HD+R CDI with a little bit of this and little bit of that
|
Sun Dec 28, 2014 7:03 am |
|
 |
Buzz Killington
MMT 1000 Club
Joined: Tue Jan 10, 2012 12:33 pm Posts: 2455
|
 Re: 1760?
I have a 1760 and love it.
I hunt, fish, swim, jump beaver dams, and water ski with this rig.
Great size.
_________________ Support your troops - they support you
B. MacDonald
|
Sun Dec 28, 2014 6:44 pm |
|
 |
Texas220
MMT Pro Member
Joined: Wed Jan 29, 2014 11:04 pm Posts: 203
|
 Re: 1760?
my 1854 is plenty wide very stable up front i would get an extended deck for fishin my rear folding deck is nice for passanger fishing deck just fyi if ur coming from a bass boat you will be dissappointed these will never compare to one as far as stability when fishing
Sent from my iPhone using Tapatalk
_________________ Using Tapatalk
|
Thu Feb 19, 2015 9:53 am |
|
 |
Texas220
MMT Pro Member
Joined: Wed Jan 29, 2014 11:04 pm Posts: 203
|
 Re: 1760?
also if u run any timber or small water i wouldnt go bigger than 54 gets tight with mine in timber and small creeks
Sent from my iPhone using Tapatalk
_________________ Using Tapatalk
|
Thu Feb 19, 2015 9:54 am |
|
 |
SETx Longtail
MMT 1000 Club
Joined: Sun Sep 01, 2013 2:53 pm Posts: 3480 Location: Hardin County, Tx
|
 Re: 1760?
I have fished out of bass boats primarily but years ago all we had were small aluminum rigs. I'm aware it won't be quite as stable but that's ok too. As long as two can fish from the front deck without knocking each other off that's good with me.
I've settled on an 1860 for an all around boat. There are a few little trails I won't get down as easily but I'm ok with the trade-off honestly.
_________________ #CFFITR
-Custom pool noodle -stage 4 water wings
|
Thu Feb 19, 2015 4:44 pm |
|
 |
Texas220
MMT Pro Member
Joined: Wed Jan 29, 2014 11:04 pm Posts: 203
|
 Re: 1760?
_________________ Using Tapatalk
|
Thu Feb 19, 2015 8:30 pm |
|
 |
|