Author |
Message |
fisherman228
MMT Member
Joined: Tue Nov 12, 2013 10:44 am Posts: 13
|
 Cracked Prodrive lower
Im looking at a used pd 25 and there is a crack on the lower unit. I havent seen it yet so i dont know exactly where its at, but was wondering if anyone knows what the cost on a replacement lower unit or lower unit housing for the motor would be?
|
Fri Feb 06, 2015 10:22 am |
|
 |
butternut
MMT F.E.
Joined: Tue Nov 12, 2013 9:30 am Posts: 770 Location: EAST ARKANSAS
|
 Re: Cracked Prodrive lower
1500.00
|
Fri Feb 06, 2015 10:49 am |
|
 |
msm8281
MMT Elite Member
Joined: Fri Oct 09, 2009 1:50 pm Posts: 9673 Location: New Iberia, La.
|
 Re: Cracked Prodrive lower
Call Prodrive. If you want a true cost. They may even give you an estimated value so you don't get screwed. No one person on here knows that answer. They will however blurt out random numbers though.
|
Fri Feb 06, 2015 10:52 am |
|
 |
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
 Re: Cracked Prodrive lower
|
Fri Feb 06, 2015 10:54 am |
|
 |
msm8281
MMT Elite Member
Joined: Fri Oct 09, 2009 1:50 pm Posts: 9673 Location: New Iberia, La.
|
 Re: Cracked Prodrive lower
I almost mentioned your name CB. But I didn't want you to get picked on with this thread too!! I heard you was a sensitive fellow:lol:
|
Fri Feb 06, 2015 11:11 am |
|
 |
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
 Re: Cracked Prodrive lower
 I don't know the answer.
|
Fri Feb 06, 2015 11:12 am |
|
 |
JLACOUR
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:18 pm Posts: 4915 Location: Lake Jackson, TX
|
 Re: Cracked Prodrive lower
_________________ 37 PD EFI FPR 18x48 Tiller SOLD -- 36 PD EFI FPR 18x48 Stick Steer SOLD -- 27 PD FPR 16x36 Skiff
|
Fri Feb 06, 2015 11:16 am |
|
 |
msm8281
MMT Elite Member
Joined: Fri Oct 09, 2009 1:50 pm Posts: 9673 Location: New Iberia, La.
|
 Re: Cracked Prodrive lower
|
Fri Feb 06, 2015 11:17 am |
|
 |
fisherman228
MMT Member
Joined: Tue Nov 12, 2013 10:44 am Posts: 13
|
 Re: Cracked Prodrive lower
Yea I called them and theyre closed for inventory. I also called the local pd dealer and they said they would have to call pd as well. Guess ill just have to wait until theyre back open. Does anyone know if you can buy just the housing or do you have to buy a whole new lower? The guy also said its leaking exhaust and that he replaced the muffler recently so that wasn't the problem. Any ideas what it could be? He says it still has good compression so im guessing not a cracked head. Manifold or a seal?
|
Fri Feb 06, 2015 11:18 am |
|
 |
JLACOUR
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:18 pm Posts: 4915 Location: Lake Jackson, TX
|
 Re: Cracked Prodrive lower
They reopen tomorrow
_________________ 37 PD EFI FPR 18x48 Tiller SOLD -- 36 PD EFI FPR 18x48 Stick Steer SOLD -- 27 PD FPR 16x36 Skiff
|
Fri Feb 06, 2015 11:20 am |
|
 |
fisherman228
MMT Member
Joined: Tue Nov 12, 2013 10:44 am Posts: 13
|
 Re: Cracked Prodrive lower
And the guy wants $3000 for the whole rig. 1542 war eagle, trailer and 04' pd 25 w/ 240 hrs
|
Fri Feb 06, 2015 11:22 am |
|
 |
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
 Re: Cracked Prodrive lower
Send an email.
I believe you will be buying an entire new lower.
No idea what the leaking exhaust means. Need more details on that in order to help.
Compression test doesn't give you a whole lot of info. Leak down will tell you more about the health of the engine.
|
Fri Feb 06, 2015 11:23 am |
|
 |
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
 Re: Cracked Prodrive lower
|
Fri Feb 06, 2015 11:24 am |
|
 |
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
 Re: Cracked Prodrive lower
|
Fri Feb 06, 2015 11:27 am |
|
 |
fisherman228
MMT Member
Joined: Tue Nov 12, 2013 10:44 am Posts: 13
|
 Re: Cracked Prodrive lower
I sent them an email so hopefully ill hear something by tomorrow. And yea I haven't seen the rig yet in person but im hoping its just a leak at the manifold.
|
Fri Feb 06, 2015 11:29 am |
|
 |
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
 Re: Cracked Prodrive lower
|
Fri Feb 06, 2015 11:33 am |
|
 |
butternut
MMT F.E.
Joined: Tue Nov 12, 2013 9:30 am Posts: 770 Location: EAST ARKANSAS
|
 Re: Cracked Prodrive lower
|
Fri Feb 06, 2015 11:38 am |
|
 |
fisherman228
MMT Member
Joined: Tue Nov 12, 2013 10:44 am Posts: 13
|
 Re: Cracked Prodrive lower
He said it leaks some exhaust. Im new to mud motors so disregard my lack of knowledge.
|
Fri Feb 06, 2015 11:39 am |
|
 |
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 Re: Cracked Prodrive lower
Its a little over 1000 for a new lower unit.
|
Fri Feb 06, 2015 11:42 am |
|
 |
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
 Re: Cracked Prodrive lower
|
Fri Feb 06, 2015 11:48 am |
|
 |
butternut
MMT F.E.
Joined: Tue Nov 12, 2013 9:30 am Posts: 770 Location: EAST ARKANSAS
|
 Re: Cracked Prodrive lower
|
Fri Feb 06, 2015 12:16 pm |
|
 |
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 Re: Cracked Prodrive lower
I think last time I did one to California it was around 100$ or less.
Definitely not 400$
|
Fri Feb 06, 2015 12:31 pm |
|
 |
med
MMT Elite Member
Joined: Wed Jan 14, 2009 8:25 am Posts: 6432 Location: the dark side of the moon
|
 Re: Cracked Prodrive lower
Dang I thought they were 5-600. Glad I don't need one,.......knock on wood8-)
_________________ 1850 & 36pd
|
Fri Feb 06, 2015 12:46 pm |
|
 |
butternut
MMT F.E.
Joined: Tue Nov 12, 2013 9:30 am Posts: 770 Location: EAST ARKANSAS
|
 Re: Cracked Prodrive lower
|
Fri Feb 06, 2015 12:53 pm |
|
 |
WhoDat88
MMT 1000 Club
Joined: Thu May 23, 2013 4:24 pm Posts: 2912 Location: Thibodaux, La
|
 Re: Cracked Prodrive lower
_________________ 1850 Predator Series Stick Steer Option 40HP Gatortail
|
Fri Feb 06, 2015 1:21 pm |
|
 |
fisherman228
MMT Member
Joined: Tue Nov 12, 2013 10:44 am Posts: 13
|
 Re: Cracked Prodrive lower
yeah that's what ive decided. the boat/trailer are nice but the motor is pretty much worthless. even if I got a new lower id still have to figure out the exhaust leak
|
Fri Feb 06, 2015 3:06 pm |
|
 |
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
 Re: Cracked Prodrive lower
How much do you think the boat and trailer are worth by themselves? And how much of your time would you invest to get a good deal?
If you could get 2k for the boat/trailer and get the price down at all, you could pick up a liitle better boat and get the pd all fixed up and come out with a really decent setup for probably under 5 grand. I've put quite a bit of little stuff like that together and come out way ahead in the end, but it will take some extra time and effort.
|
Fri Feb 06, 2015 3:23 pm |
|
 |
stricklines
MMT Member
Joined: Wed Sep 18, 2013 11:19 am Posts: 8
|
 Re: Cracked Prodrive lower
this is funny I actually spoke to the same guy about that same rig. This motor also does not have reverse
|
Fri Feb 06, 2015 3:45 pm |
|
 |
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
 Re: Cracked Prodrive lower
|
Fri Feb 06, 2015 3:55 pm |
|
 |
WhoDat88
MMT 1000 Club
Joined: Thu May 23, 2013 4:24 pm Posts: 2912 Location: Thibodaux, La
|
 Re: Cracked Prodrive lower
That thing ain't worth 1500
_________________ 1850 Predator Series Stick Steer Option 40HP Gatortail
|
Fri Feb 06, 2015 3:57 pm |
|
 |
stricklines
MMT Member
Joined: Wed Sep 18, 2013 11:19 am Posts: 8
|
 Re: Cracked Prodrive lower
He explained it as an exhaust leak. I asked what he thought it was and he said that he had not paid it much attention he just heard a ticking back there. He did not think it was the muffler.
I am also scared that it will be an extreme money pit
|
Fri Feb 06, 2015 4:18 pm |
|
 |
50fps
MMT 1000 Club
Joined: Tue Jan 13, 2009 6:42 pm Posts: 2377 Location: West Coast Wisconsin
|
 Re: Cracked Prodrive lower
Is it the elbow thats cracked or the lower assembly? I may have a spare you could tranfer the internals over too.
|
Sun Feb 08, 2015 4:00 pm |
|
 |
|