| Author |
Message |
|
chevy01
MMT Pro Member
Joined: Thu Jul 04, 2013 6:44 pm
Posts: 105
Location: orlando fl
|
 35 stage 2 mod pully size what size pullys are people running with a mudbuddy 35 stage 2 mods mikuni, boat doctor heads and a pvt cam. i currently have the stock 37,48 just wondering if any one changes them i can turn a hammer 4,600 rpms and would i benefit me to change them
_________________
1648 G3 2013 mudbuddy 35
|
| Mon Feb 16, 2015 2:54 pm |
|
|
|
zborden25
MMT Pro Member
Joined: Fri Dec 27, 2013 10:46 pm
Posts: 183
Location: st bernard louisiana
|
Re: 35 stage 2 mod pully size interested in this as well
_________________
1854 Prodigy w GTR 37EFI w DPE LEVEL 3
|
| Mon Feb 16, 2015 5:56 pm |
|
|
|
270Handiman
MMT 1000 Club
Joined: Thu Dec 29, 2011 10:46 pm
Posts: 2342
Location: Mandeville, LA
|
Re: 35 stage 2 mod pully size The only reason you change gearing is to manipulate your rpm's. 4600 with the hammer is about perfect. Is that with your average load in the boat? If so, I'd say you're good. With a BB, you're probably close to 4850-4900, which again is about perfect.
This all assumes you don't have a CDI motor, limited at 4700.
|
| Mon Feb 16, 2015 6:24 pm |
|
|
|
chevy01
MMT Pro Member
Joined: Thu Jul 04, 2013 6:44 pm
Posts: 105
Location: orlando fl
|
Re: 35 stage 2 mod pully size yes i have the cdi motor i havnt tried it with a new bigblade yet im gonna test it out this week but i am pretty sure its gonna hit the rev limiter what all do i have to do to put the 5200 coils in and be safe (rods&pistons)?
_________________
1648 G3 2013 mudbuddy 35
|
| Mon Feb 16, 2015 7:03 pm |
|
|
|
chevy01
MMT Pro Member
Joined: Thu Jul 04, 2013 6:44 pm
Posts: 105
Location: orlando fl
|
Re: 35 stage 2 mod pully size yes i have the cdi motor i havnt tried it with a new bigblade yet im gonna test it out this week but i am pretty sure its gonna hit the rev limiter what all do i have to do to put the 5200 coils in and be safe (rods&pistons)?
_________________
1648 G3 2013 mudbuddy 35
|
| Mon Feb 16, 2015 7:03 pm |
|
|
|
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm
Posts: 9869
|
Re: 35 stage 2 mod pully size I would leave it right where you have it.
|
| Tue Feb 17, 2015 7:52 am |
|
|
|
SCmudder7071
MMT 1000 Club
Joined: Mon Feb 07, 2011 12:10 pm
Posts: 3024
|
Re: 35 stage 2 mod pully size They don't make 5200 coils.
_________________
1754 Extreme/LAProp Stage 2 GTR
|
| Tue Feb 17, 2015 8:55 am |
|
|
|
msm8281
MMT Elite Member
Joined: Fri Oct 09, 2009 1:50 pm
Posts: 9673
Location: New Iberia, La.
|
Re: 35 stage 2 mod pully size He probably means rev limiter.
|
| Tue Feb 17, 2015 9:01 am |
|
|
|
SCmudder7071
MMT 1000 Club
Joined: Mon Feb 07, 2011 12:10 pm
Posts: 3024
|
Re: 35 stage 2 mod pully size Says he has a cdi motor...
_________________
1754 Extreme/LAProp Stage 2 GTR
|
| Tue Feb 17, 2015 3:58 pm |
|
|
|
270Handiman
MMT 1000 Club
Joined: Thu Dec 29, 2011 10:46 pm
Posts: 2342
Location: Mandeville, LA
|
Re: 35 stage 2 mod pully size If your turning the hammer 4600 on a motor limited at 4700, then you're good. Leave that prop on it and go.
|
| Tue Feb 17, 2015 4:05 pm |
|
|
|
chevy01
MMT Pro Member
Joined: Thu Jul 04, 2013 6:44 pm
Posts: 105
Location: orlando fl
|
Re: 35 stage 2 mod pully size Ok thanks
Sent from my iPhone using Tapatalk
_________________
1648 G3 2013 mudbuddy 35
|
| Tue Feb 17, 2015 5:05 pm |
|
|
|
