It is currently Sat Jun 28, 2025 5:01 am




Reply to topic  [ 8 posts ] 
 Pods for grizzly 
Author Message
MMT Pro Member

Joined: Tue Sep 16, 2014 7:03 pm
Posts: 129
Post Pods for grizzly
Looking at getting some pods for the back of my 16x48 grizzly with a 36hp prodrive. Any u guys recommend staying away from? I've heard good an bad things about pods, is it worth the money? I normally run a lot of vegetation on some times can get into shallow water depending on the tides.

Sent from my SM-G900V using Tapatalk


Sat Aug 01, 2015 11:26 am
Profile
MMT 1000 Club
User avatar

Joined: Wed Apr 17, 2013 5:15 pm
Posts: 2032
Post Re: Pods for grizzly
I wouldn't waste my money on pods if you got a surface drive.


Sat Aug 01, 2015 11:31 am
Profile
MMT Addict
User avatar

Joined: Tue Nov 15, 2011 3:27 pm
Posts: 664
Location: Henderson, Tx
Post Re: Pods for grizzly
I've had pods on a southfork boat with a prodrive and they actually helped alot. I will say I lost about 2mph but the shallow water performance I gained was well worth the speed loss. Mine was a 1546 with a 27 and it squatted too much without them. I know someone that ran an outboard on a 1648 grizzly and the beavertail pods matched up good with his hull, but I don't know about mm performance on that hull with them.


Sat Aug 01, 2015 11:38 am
Profile
MMT 1000 Club
User avatar

Joined: Thu Nov 04, 2010 7:38 am
Posts: 4323
Location: Cut Off, La.
Post Re: Pods for grizzly
Don't waste the money. The little amount that pods can help "if done right" does not outweigh the bad that hurt performance.
I had pods put on my boat, only because of it squatting in the back, then I cut them off cause they killed performance.
don't do it.,

_________________
Refurbishing a Prodrive


Sat Aug 01, 2015 6:50 pm
Profile
MMT Pro Member

Joined: Wed Jan 14, 2009 9:23 pm
Posts: 404
Location: Idaho
Post Re: Pods for grizzly
Do you have FPR? If so, by the time you leave enough room to swivel that lower unit around, those pods will be so narrow, they likely won't benefit you at all on a 48" hull. You'd be better off with a slightly longer and wider hull.

_________________
1860 Prodigy


Sun Aug 02, 2015 7:51 am
Profile
MMT Pro Member

Joined: Tue Sep 16, 2014 7:03 pm
Posts: 129
Post Re: Pods for grizzly
Good point mallards, more cons than pros. I still have the battery in the back but I'm going to relocate it to the bow of the boat and also make a split bench seat in the rear hopefully free up some weight.

Sent from my SM-G900V using Tapatalk


Sun Aug 02, 2015 11:16 am
Profile
MMT Pro Member

Joined: Wed Jan 14, 2009 9:23 pm
Posts: 404
Location: Idaho
Post Re: Pods for grizzly
A 1648 is a little small for most MM's, especially a PD36 if that's what you have. You need more surface area and front weight to draft appropriately in order to maximize your shallow water potential. Not saying a 1648 won't work but you just won't be able to get as shallow as you would with a bigger hull. Been there, done it. :D If you're gonna move stuff, move the fuel tank first. It's a lot easier to use battery operated headlights, etc with the battery in the rear.

_________________
1860 Prodigy


Mon Aug 03, 2015 6:19 am
Profile
MMT Pro Member

Joined: Tue Sep 16, 2014 7:03 pm
Posts: 129
Post Re: Pods for grizzly
Yea fuel tank is already moved up front, we'll see if moving the battery and taking some weight out from the back seat will help a little. Thanks for the info!

Sent from my SM-G900V using Tapatalk


Mon Aug 03, 2015 8:01 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 8 posts ] 

Who is online

Users browsing this forum: No registered users and 153 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: