Author |
Message |
schafer816
MMT Member
Joined: Sat Feb 22, 2014 3:33 pm Posts: 38
|
 EXCEL CONS????
Minus the boats being heavy is there anything bad about these boats? Im in north Missouri hunt big water as much marsh/flood corn. Also fish big water in the summer as much as I hunt in the winter. So I need a big water boat as much as shallow water. Ready to pull the trigger just don't want to have any REGRETS... Also have a dealer 2 hours away which is a plus. Way closer than any other boat dealer etc. HAVOC. Don't have mud flats to just go run like down south, which I feel like that's why weight is a big deal for lot of guys????
|
Wed Aug 05, 2015 11:32 pm |
|
 |
Puddler45
MMT 1000 Club
Joined: Thu May 03, 2012 9:07 am Posts: 1199 Location: Wisconsin's waters and woods
|
 Re: EXCEL CONS????
They are very nice to fish out of buddy has a 1852 w hunt deck. It's a great boat. Not nessesarily what I would get but 3 man fishing load was 22-23 with stage 1. Stable and a dry ride. Just a little slow not sure how well it tuned so could be leaving some on the table.
_________________ 1744 floating a 23 MBHD Stage 2
|
Wed Aug 05, 2015 11:48 pm |
|
 |
schafer816
MMT Member
Joined: Sat Feb 22, 2014 3:33 pm Posts: 38
|
 Re: EXCEL CONS????
|
Thu Aug 06, 2015 12:27 am |
|
 |
Dagnabit
MMT Member
Joined: Sun Jul 21, 2013 9:03 am Posts: 47 Location: Houston tx
|
 Re: EXCEL CONS????
Buddy has one and despite all the negative things I have heard online his does very well. We hunt 4 people, decoys, dog and hunting gear and it rolls out just fine. He has a MB with heads carb exhaust.prob runs in the upper 20s. I would have no prob buying one but she slides bad in shallows .
|
Thu Aug 06, 2015 12:57 am |
|
 |
schafer816
MMT Member
Joined: Sat Feb 22, 2014 3:33 pm Posts: 38
|
 Re: EXCEL CONS????
|
Thu Aug 06, 2015 1:08 am |
|
 |
mudxxed
MMT 1000 Club
Joined: Thu Sep 05, 2013 4:46 pm Posts: 1398 Location: SE Bama
|
 Re: EXCEL CONS????
I have one as well. Older model 07. Its got a 5degree V. It run 28-30 with heads, carb and gutted exhaust. I wouldnt go that route again. Not sure if they ran stringer horizontal in that year model or not, but shes heavy, waterlogged and hooked. I must have a freak motor and boat to get the speeds I do, and she does great shallow.
_________________ 1651 Excel/ 35 MB HD: little of dis, little of dat
|
Thu Aug 06, 2015 4:19 am |
|
 |
schafer816
MMT Member
Joined: Sat Feb 22, 2014 3:33 pm Posts: 38
|
 Re: EXCEL CONS????
|
Thu Aug 06, 2015 4:35 am |
|
 |
deadbird8
MMT 1000 Club
Joined: Wed Feb 04, 2009 7:50 pm Posts: 3833 Location: Old East Dallas, Texas
|
 Re: EXCEL CONS????
_________________ Excel 1851F4 w/ MB35HD+R CDI with a little bit of this and little bit of that
|
Thu Aug 06, 2015 5:04 am |
|
 |
deadbird8
MMT 1000 Club
Joined: Wed Feb 04, 2009 7:50 pm Posts: 3833 Location: Old East Dallas, Texas
|
 Re: EXCEL CONS????
_________________ Excel 1851F4 w/ MB35HD+R CDI with a little bit of this and little bit of that
|
Thu Aug 06, 2015 5:39 am |
|
 |
mudxxed
MMT 1000 Club
Joined: Thu Sep 05, 2013 4:46 pm Posts: 1398 Location: SE Bama
|
 Re: EXCEL CONS????
I knew that they had changed hands since the tornado mishap. Cant compare mine to a newer model. Thats some good info there deadbird. I got a hook where I stand by the transom I also have the .125 but didnt know it was the 5052. Makes sense why I got the hooks I do. Did you ever pull the foam out of your old boat?
_________________ 1651 Excel/ 35 MB HD: little of dis, little of dat
|
Thu Aug 06, 2015 6:53 am |
|
 |
deadbird8
MMT 1000 Club
Joined: Wed Feb 04, 2009 7:50 pm Posts: 3833 Location: Old East Dallas, Texas
|
 Re: EXCEL CONS????
_________________ Excel 1851F4 w/ MB35HD+R CDI with a little bit of this and little bit of that
|
Thu Aug 06, 2015 4:27 pm |
|
 |
mudxxed
MMT 1000 Club
Joined: Thu Sep 05, 2013 4:46 pm Posts: 1398 Location: SE Bama
|
 Re: EXCEL CONS????
I ain't got one floor mounted seat base... All on the rear pods and one on bow. What u end up selling the hull for?
_________________ 1651 Excel/ 35 MB HD: little of dis, little of dat
|
Thu Aug 06, 2015 5:41 pm |
|
 |
|