| Author |
Message |
|
Bayport
MMT Pro Member
Joined: Mon Jan 26, 2009 12:51 pm
Posts: 151
|
 Re: 1750 Deadfowl Build Awesome project
On that pic of your front hatch...do u have a drain for the channel?
Just curious
|
| Thu Oct 15, 2015 9:23 am |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Which channel? Up in the front inside the hatch or the trays the hatch closes on?
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Thu Oct 15, 2015 1:27 pm |
|
|
|
Bayport
MMT Pro Member
Joined: Mon Jan 26, 2009 12:51 pm
Posts: 151
|
Re: 1750 Deadfowl Build The pic where u can see into the bow compartment. The channel under the hatch...
|
| Thu Oct 15, 2015 1:41 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build The bottom of the compartment yes, the channel the hatch door rests in, I'm not positive if he incorporated a drain or not
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Thu Oct 15, 2015 2:33 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Huntdeck just about completely knocked out! ImageUploadedByTapatalk1444957512.995230.jpgImageUploadedByTapatalk1444957528.268555.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Thu Oct 15, 2015 7:05 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Start of the rear dry boxes/seats ImageUploadedByTapatalk1445304179.022745.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Mon Oct 19, 2015 7:23 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Rear seat/storage bout done! ImageUploadedByTapatalk1445479079.612631.jpgImageUploadedByTapatalk1445479095.750261.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Wed Oct 21, 2015 7:58 pm |
|
|
|
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm
Posts: 7064
Location: Mallard country
|
Re: 1750 Deadfowl Build Hull looks good for sure! Rj was getting ready to start the rear seats Sunday when I was at his house!
Sent from my iPhone using Tapatalk
|
| Fri Oct 23, 2015 8:43 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Yea he mentioned you stopped by when I talked to him earlier this week. Him and I bother were anxious to see how it turned out with a flat bottom and pointed nose with that winch mount put in..I think it turned it pretty good! I appreciate it! I know he wasn't looking forward to them, said they are a big pain in the a**. Lol
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Fri Oct 23, 2015 10:47 pm |
|
|
|
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm
Posts: 7064
Location: Mallard country
|
Re: 1750 Deadfowl Build Rj told me he tried to talk you out of them, they come out nice. I do like the ice chest seat just because you can move it and have the whole back to work motor if you need to!
Sent from my iPhone using Tapatalk
|
| Sat Oct 24, 2015 10:44 am |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Haha yea he tried too. I've just always liked them/wanted them. Lol plus I'm going to be able to hide my bilge in them. I'll mount my bilge under hunt deck and run my discharge line up and through the inside, up under the catwalk side. If that makes sense what I'm saying? Lol
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sat Oct 24, 2015 11:29 am |
|
|
|
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm
Posts: 7064
Location: Mallard country
|
Re: 1750 Deadfowl Build Yes I get what you are saying. Will come out nice doe sure!!
Sent from my iPhone using Tapatalk
|
| Sat Oct 24, 2015 11:51 am |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build I think so! Anxious to see her complete! Lol
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sat Oct 24, 2015 11:54 am |
|
|
|
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16915
Location: Rowlett, TX
|
Re: 1750 Deadfowl Build The man is an artist.
|
| Sat Oct 24, 2015 2:09 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build He is definitely good at what he is doing for sure! One of the coolest things, being one of his friends, is see him come all this way from his very first boat he built himself some years ago! It's pretty neat to see how they have all evolved from his beginning project!
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sat Oct 24, 2015 2:14 pm |
|
|
|
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16915
Location: Rowlett, TX
|
Re: 1750 Deadfowl Build No doubt. The first one was still a good lookin' boat though.
|
| Sat Oct 24, 2015 2:34 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Oh definitely! And with codys motor work, she would run like a scalded ass ape! Lol
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sat Oct 24, 2015 2:40 pm |
|
|
|
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm
Posts: 7064
Location: Mallard country
|
Re: 1750 Deadfowl Build
|
| Sat Oct 24, 2015 3:10 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Left side catwalk complete and bow eyes on the rear instead of handles ImageUploadedByTapatalk1445825263.123520.jpgImageUploadedByTapatalk1445825283.745616.jpgImageUploadedByTapatalk1445825300.440347.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sun Oct 25, 2015 8:08 pm |
|
|
|
med
MMT Elite Member
Joined: Wed Jan 14, 2009 8:25 am
Posts: 6432
Location: the dark side of the moon
|
Re: 1750 Deadfowl Build Being that you're gonna be running a gtr I figured he would have put the extra bow eyes on the front. It's much easier to be towed from the front. But he's the builder so I suppose RJ knows best.
_________________
1850 & 36pd
|
| Sun Oct 25, 2015 9:09 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build I've got a bow eye on the front as well, but instead of your standard handles everyone puts on the rear, I decided to go with bow eyes on the rear instead. Place for my trailer straps to hook. Plus with the steps integrated, the eyes fit better than a handle would
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sun Oct 25, 2015 9:13 pm |
|
|
|
TooTall
MMT Pro Member
Joined: Sun Nov 30, 2014 1:37 pm
Posts: 411
Location: Pineville, La
|
Re: 1750 Deadfowl Build I actually think I might go with the bow eyes on the back too instead of handles. Looks better and plus you have those handles on the hunt deck anyways.. Really looking good now man. Can't wait till next spring so I can order mine!
|
| Sun Oct 25, 2015 9:34 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Yea, I really like the look of the eyes vs the handle. And exactly what you said, I've got my false transom to huntdeck handles to grab and pull on so no need for handles. I appreciate it!
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sun Oct 25, 2015 9:38 pm |
|
|
|
med
MMT Elite Member
Joined: Wed Jan 14, 2009 8:25 am
Posts: 6432
Location: the dark side of the moon
|
Re: 1750 Deadfowl Build
_________________
1850 & 36pd
|
| Sun Oct 25, 2015 9:58 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Sorry, I'm at work so I didn't catch what you were saying at first, med. Lol but I got it now. Haha
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sun Oct 25, 2015 10:11 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Well here is a few more pictures, console is about finished and the catwalk between the seat and console! ImageUploadedByTapatalk1445908732.577199.jpgImageUploadedByTapatalk1445908746.383648.jpgImageUploadedByTapatalk1445908758.668801.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Mon Oct 26, 2015 7:19 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build ImageUploadedByTapatalk1445914120.969703.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Mon Oct 26, 2015 8:48 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Well all we lack now is paint and hydroturf! ImageUploadedByTapatalk1445998249.746297.jpgImageUploadedByTapatalk1445998258.879933.jpgImageUploadedByTapatalk1445998270.189762.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Tue Oct 27, 2015 8:11 pm |
|
|
|
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm
Posts: 7064
Location: Mallard country
|
Re: 1750 Deadfowl Build Should have it by season for sure then!
Sent from my iPhone using Tapatalk
|
| Tue Oct 27, 2015 8:15 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Yes sir!!
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Tue Oct 27, 2015 8:23 pm |
|
|
|
Bayport
MMT Pro Member
Joined: Mon Jan 26, 2009 12:51 pm
Posts: 151
|
Re: 1750 Deadfowl Build Really sweet
Love the cup holder on the panel!
Is that handle removable?
|
| Wed Oct 28, 2015 10:38 am |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Preciate it! Yes it's removable. Just slides out. Went with a square handle so I don't have to run a pin through it. Just slide the square one in or out and your done
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Wed Oct 28, 2015 10:50 am |
|
|
|
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16915
Location: Rowlett, TX
|
Re: 1750 Deadfowl Build Could do round pipe welded into a square tube for the base. 
|
| Wed Oct 28, 2015 10:52 am |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Yea I suppose you could do that. I like the look of the square
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Wed Oct 28, 2015 11:24 am |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Rails complete, time for paint prep hopefully! ImageUploadedByTapatalk1446167796.304329.jpgImageUploadedByTapatalk1446167804.721180.jpgImageUploadedByTapatalk1446167818.130472.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Thu Oct 29, 2015 7:17 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build ImageUploadedByTapatalk1446167839.024624.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Thu Oct 29, 2015 7:17 pm |
|
|
|
North LA Hunter
MMT Elite Member
Joined: Mon Aug 02, 2010 8:39 pm
Posts: 6976
Location: West Monroe, LA
|
Re: 1750 Deadfowl Build Good looking hull! I would be proud to own that hull!!
Sent from my iPhone using Tapatalk
|
| Thu Oct 29, 2015 7:52 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Oh theres no doubt that i will be very proud of it! Haha I will definitely be taking very good care of her! i can't wait to see a little color on her!
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Thu Oct 29, 2015 8:01 pm |
|
|
|
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm
Posts: 7064
Location: Mallard country
|
Re: 1750 Deadfowl Build Yes turned out nice! you might have said, not going back and looking!! Are you painting it bottomland?
Sent from my iPhone using Tapatalk
|
| Thu Oct 29, 2015 8:17 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Haha yea I'm going with bottomland. It's the redleg bark. On the redleg website I believe it is the Redleg Timber HD. Going with the base coat Rj has (very similar and close to gator tail green/brown) with major brown blotches and the flat black bark. We also talked about and settled on, since I have a black fairlead, black shark eyes, black light bar, and black hydroturf, he is painting the motor black instead of camo. With all the black accents, the black motor will looks badass we feel like. (Just wish we would have thought of it sooner so I could have got factory black motor) oh well! Haha
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Thu Oct 29, 2015 8:33 pm |
|
|
|
