MudmotorTalk.com - View topic - 1854 Uncle-J 35 mudbuddy (updated)

Page 1 of 1

[ 24 posts ]

1854 Uncle-J 35 mudbuddy (updated)

Author	Message
Barroll MMT F.E. Joined: Fri Jan 15, 2010 10:19 am Posts: 932 Location: Georgia	1854 Uncle-J 35 mudbuddy (updated) Well i finally got it all painted up and got around to doing a review for it. MM Brand: Mudbuddy Horsepower: 35 (Single mikuni, IM heads, dual pipes) Boat Brand: Uncle-J Boat Size: 1854, 21 inch sides, tall transom, 3/16 bottom and everything else is 1/8. The floor is .90 After Mods: Just me in the boat 29.3. One other person 28.5, third person 27.5. All deep water. 2 batteries, 10 gal of gas I have only had a chance to run it in deep water and It was running right at 27 mph with me and one other guy so a total of 400lbs plus 6 gallons of gas, and 1 battery. With just me in the boat it runs right at 28. I am very happy with the boat and have nothing but good things to say about Jason and his crew. He is very easy to work with and I would recommend him to anyone looking to have a boat built the way they want it. It says a lot about a person when they quote you a price and it turns out to be a little cheaper than the original quote in the end. I am expecting to get a little more speed once i get a new prop before the season starts. I have a hair more than 1/4 inch worn off when i got these speeds. I am also planning on either getting a single mikuni or do my heads so hopefully whatever i decide to do will bump it up to around 30 mph. You do not have the required permissions to view the files attached to this post. _________________ 1848 Prodigy 35 GTR
Mon May 02, 2011 11:37 am

earl33 MMT 1000 Club Joined: Wed Sep 16, 2009 3:47 pm Posts: 2261 Location: West Tennessee	Re: 1854 Uncle-J 35 mudbuddy looks good. I see its got a PD nose.. Do I see a Big Blade issue in the works? _________________ If the Steel aint Flying the Birds aint Dying.... Uncle J 1948 holding a LT Uncle J 1848 w/?
Mon May 02, 2011 12:50 pm

OwenDickeson MMT Elite Member Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869	Re: 1854 Uncle-J 35 mudbuddy Nice boat. Who painted it?
Mon May 02, 2011 1:02 pm

Barroll MMT F.E. Joined: Fri Jan 15, 2010 10:19 am Posts: 932 Location: Georgia	Re: 1854 Uncle-J 35 mudbuddy _________________ 1848 Prodigy 35 GTR
Mon May 02, 2011 1:40 pm

caddobrook MMT F.E. Joined: Mon Feb 01, 2010 11:01 am Posts: 881	Re: 1854 Uncle-J 35 mudbuddy
Mon May 02, 2011 6:35 pm

Tenpoint MMT 1000 Club Joined: Thu Aug 27, 2009 5:22 pm Posts: 2029 Location: Patterson LA	Re: 1854 Uncle-J 35 mudbuddy Looks good man. Ive been waiting for a review on this one. I like it man. _________________ 19x48 Rink/Aucoin Bateau w/35 GTR 20x60 Home-made skiff w/200 Merc
Mon May 02, 2011 6:46 pm

Barroll MMT F.E. Joined: Fri Jan 15, 2010 10:19 am Posts: 932 Location: Georgia	Re: 1854 Uncle-J 35 mudbuddy _________________ 1848 Prodigy 35 GTR
Mon May 02, 2011 9:44 pm

duckduckboom MMT Elite Member Joined: Tue Nov 23, 2010 6:33 pm Posts: 5603 Location: Corner of Hell an high water, La	Re: 1854 Uncle-J 35 mudbuddy hahahah wonder where that cup holder idea came from?? _________________ You have your whole life to be an idiot, take a day off!
Mon May 02, 2011 9:48 pm

captskr MMT Pro Member Joined: Thu Jan 13, 2011 10:44 am Posts: 120 Location: lower alabama	Re: 1854 Uncle-J 35 mudbuddy looks great,just got my boat from jason friday and love it _________________ 1748 uncle j skiff gtr 35
Tue May 03, 2011 12:33 am

bpurvis MMT Addict Joined: Fri Jul 30, 2010 9:30 am Posts: 627 Location: Baton Rouge, LA	1854 Uncle-J 35 mudbuddy Lol yea that Beer holder looks great! I know Jason is taking the credit for my genius invention! Here was the original sketch for that. _________________ Sold my Uncle-J and my PD so Fuc* Y'all!!!!!. "THE EDGE: There is no honest way to explain it because, the only ones who know where it is have gone over. The others... the living, are those who've pushed their control as far as they felt they could handle and then pulled back or slowed down........BUT the edge is still out there...."
Tue May 03, 2011 7:53 am

oncall MMT 1000 Club Joined: Mon May 10, 2010 1:46 pm Posts: 1180 Location: Georgia	Re: 1854 Uncle-J 35 mudbuddy Good looking sketch, not sure on your beer selection.. red stripe.. _________________ 1854 Brother pulling a 36 PD viewtopic.php?f=5&t=12825 Brooks: "Tries masterbation and thank happy thots ...... purt near pulled mines off when I quit 'em ....."
Tue May 03, 2011 8:15 am

BROOKS MMT 1000 Club Joined: Tue Jan 13, 2009 9:46 pm Posts: 4596 Location: East TEXAN Proud	Re: 1854 Uncle-J 35 mudbuddy _________________ Git a Gator-Tail or ride in mines wake ...... MtrFact !!!!! '05 Model .... Still Number One on the Water !!!!
Tue May 03, 2011 8:18 am

duckduckboom MMT Elite Member Joined: Tue Nov 23, 2010 6:33 pm Posts: 5603 Location: Corner of Hell an high water, La	Re: 1854 Uncle-J 35 mudbuddy the cup holders are for the beer next in line. you can't double fist and run a tiller _________________ You have your whole life to be an idiot, take a day off!
Tue May 03, 2011 9:32 am

bpurvis MMT Addict Joined: Fri Jul 30, 2010 9:30 am Posts: 627 Location: Baton Rouge, LA	Re: 1854 Uncle-J 35 mudbuddy _________________ Sold my Uncle-J and my PD so Fuc* Y'all!!!!!. "THE EDGE: There is no honest way to explain it because, the only ones who know where it is have gone over. The others... the living, are those who've pushed their control as far as they felt they could handle and then pulled back or slowed down........BUT the edge is still out there...."
Tue May 03, 2011 9:42 am

BROOKS MMT 1000 Club Joined: Tue Jan 13, 2009 9:46 pm Posts: 4596 Location: East TEXAN Proud	Re: 1854 Uncle-J 35 mudbuddy _________________ Git a Gator-Tail or ride in mines wake ...... MtrFact !!!!! '05 Model .... Still Number One on the Water !!!!
Tue May 03, 2011 9:54 am

Brasso	Re: 1854 Uncle-J 35 mudbuddy How much did that stencil kit run you? looks awsome, real good job with the paint
Tue May 03, 2011 10:01 am

Barroll MMT F.E. Joined: Fri Jan 15, 2010 10:19 am Posts: 932 Location: Georgia	Re: 1854 Uncle-J 35 mudbuddy _________________ 1848 Prodigy 35 GTR
Tue May 03, 2011 10:58 am

Brasso	Re: 1854 Uncle-J 35 mudbuddy Thanks podna. That's a nice boat
Tue May 03, 2011 11:43 am

dog walker MMT Elite Member Joined: Tue Jan 13, 2009 6:08 pm Posts: 5282 Location: Meraux,La.	Re: 1854 Uncle-J 35 mudbuddy Holy shit another great innovation in the mm world a beverage holder on the grab bar!!!!! Nevermind it's been done before. Nice boat by the way and great job with the stencils
Tue May 03, 2011 1:20 pm

MaXXis85 MMT Elite Member Joined: Wed Jan 14, 2009 7:23 am Posts: 6233 Location: Tarkington, TX	Re: 1854 Uncle-J 35 mudbuddy Werd da beer holder has been done by many builders for many years! _________________ Bayou Surface Drive 337-351-0362 Tarkington, TX 77327
Tue May 03, 2011 2:54 pm

jordy MMT 1000 Club Joined: Thu Mar 11, 2010 8:25 pm Posts: 1588 Location: South Louisiana	Re: 1854 Uncle-J 35 mudbuddy sweet looking rig bro, great job by nunc j and his team. congrats barroll go get that thing muddy!!
Tue May 03, 2011 6:40 pm

T-Bird MMT Member Joined: Wed Mar 30, 2011 11:18 am Posts: 12	Re: 1854 Uncle-J 35 mudbuddy Looks good
Tue May 10, 2011 8:46 pm

Barroll MMT F.E. Joined: Fri Jan 15, 2010 10:19 am Posts: 932 Location: Georgia	Re: 1854 Uncle-J 35 mudbuddy updated with mods Updated after mods.... _________________ 1848 Prodigy 35 GTR
Wed Nov 16, 2011 11:51 pm

eljefe MMT Elite Member Joined: Thu Jan 13, 2011 7:32 am Posts: 5210 Location: Beaumont Texas	Re: 1854 Uncle-J 35 mudbuddy _________________ You can't see the sunrise if your eyes are closed. dying aint much of a livin.... Black ops IITX marshstalker 1840 WC www.wccustomboats.com fuel injected 25 GTR
Thu Nov 17, 2011 1:02 pm

Display posts from previous: Sort by

Page 1 of 1

[ 24 posts ]

1854 Uncle-J 35 mudbuddy (updated)

Who is online