Author |
Message |
toothlesswonder
MMT Pro Member
Joined: Sun Sep 25, 2011 2:32 pm Posts: 125
|
 Sizing my new hull. Is narrow faster?
I have a 1540 with a 12 hp copperhead, but I will be upgrading soon. I hunt with 2 other guys, and my current rig goes 16 mph with that load. I want something that carries a load better and is faster. I'm looking at getting J to build me a hull. I will be running atleast a 35 sd, maybe a blackdeath 4500. What size would you choose? 1846? 1860? Something else??
_________________ uncle j 2048 / gtr 35
|
Fri Dec 02, 2011 8:31 pm |
|
 |
toothlesswonder
MMT Pro Member
Joined: Sun Sep 25, 2011 2:32 pm Posts: 125
|
 Sizing my new hull. Is narrow faster?
Forgot to mention that we don't have that soupy mud in south Texas. Just shallow water with lots of logs. Blasting mud flats isnt this rigs purpose. I also fish the coast, so this rig has to do both.
_________________ uncle j 2048 / gtr 35
|
Fri Dec 02, 2011 8:35 pm |
|
 |
poorboy1
MMT Member
Joined: Sun Aug 21, 2011 8:38 am Posts: 29
|
 Re: Sizing my new hull. Is narrow faster?
1850 might not be a bad choice. kinda in the middle of what you said. i had a 1850 gatortrax with huntdeck mudbuddy 4000. it was ok needed more motor.
_________________ Hell On 18 Wheels
|
Fri Dec 02, 2011 9:39 pm |
|
 |
duckduckboom
MMT Elite Member
Joined: Tue Nov 23, 2010 6:33 pm Posts: 5603 Location: Corner of Hell an high water, La
|
 Re: Sizing my new hull. Is narrow faster?
^^ that's beacuse gator traxx are heavy. I8 48 will be faster but an 1852 will handle a load better. So pick your poison. I have an 1848 nonc j
_________________ You have your whole life to be an idiot, take a day off!
|
Fri Dec 02, 2011 10:25 pm |
|
 |
toothlesswonder
MMT Pro Member
Joined: Sun Sep 25, 2011 2:32 pm Posts: 125
|
 Sizing my new hull. Is narrow faster?
I scout and fish alone. I only have other people in the boat when I'm hunting. My main concern is speed when I'm solo, but I want it to be safe when it's loaded down. When the seasons over, I fish the rivers near town a couple times a week, so a slow boat would suck.
I have my duck hunting boat as stated above but I also have a poling skiff with a 25 merc. I want to sell both and upgrade to a badass mud motor/boat combo.
_________________ uncle j 2048 / gtr 35
|
Fri Dec 02, 2011 10:52 pm |
|
 |
duckduckboom
MMT Elite Member
Joined: Tue Nov 23, 2010 6:33 pm Posts: 5603 Location: Corner of Hell an high water, La
|
 Re: Sizing my new hull. Is narrow faster?
18 54 will suit you well. When I say slower I mean 1-2 mph. These boats with a stock 35 or 36 only run 27-31 mph with a good boat.
_________________ You have your whole life to be an idiot, take a day off!
|
Fri Dec 02, 2011 11:21 pm |
|
 |
brasso
MMT Elite Member
Joined: Fri Oct 07, 2011 12:58 am Posts: 5557
|
 Re: Sizing my new hull. Is narrow faster?
Toothlesswonder - check your inbox, I sent you a PM.
_________________ 1850 Uncle J Delta Performance level 4 GTR
|
Sat Dec 03, 2011 1:50 am |
|
 |
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 Sizing my new hull. Is narrow faster?
Oh shit... Don't open it!!
|
Sat Dec 03, 2011 8:18 am |
|
 |
Sando
MMT Pro Member
Joined: Wed Jul 07, 2010 6:41 am Posts: 399 Location: Texarkana, AR
|
 Re: Sizing my new hull. Is narrow faster?
I have an 1848 and it screams when its just me, get three other guys in it and it slows way down....but think how often those other guys are acutally in it and how much fun it is to whip around those cypress trees doing 30+
_________________ FEAR MY WAKE!!!! http://mudmotortalk.com/mmt_v2/viewtopi ... =5&t=12134
|
Sat Dec 03, 2011 9:06 am |
|
 |
brasso
MMT Elite Member
Joined: Fri Oct 07, 2011 12:58 am Posts: 5557
|
 Re: Sizing my new hull. Is narrow faster?
_________________ 1850 Uncle J Delta Performance level 4 GTR
|
Sat Dec 03, 2011 9:07 am |
|
 |
Crews
MMT 1000 Club
Joined: Wed Jan 14, 2009 9:07 pm Posts: 2260 Location: Lafayette
|
 Sizing my new hull. Is narrow faster?
18x48
_________________ 24x60 Dual Prodrives
|
Sat Dec 03, 2011 10:05 am |
|
 |
JIMMY W
MMT 1000 Club
Joined: Tue Jan 13, 2009 8:02 pm Posts: 4534 Location: South Louisiana
|
 Re: Sizing my new hull. Is narrow faster?
I would go no less then 50!!
_________________ 17/54 GT EXTREME Center Console, Huntdeck w/ GTR 35
Hoyt Mods and some other goodies
|
Sat Dec 03, 2011 10:24 am |
|
 |
dog walker
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm Posts: 5282 Location: Meraux,La.
|
 Re: Sizing my new hull. Is narrow faster?
test drive
|
Sat Dec 03, 2011 11:42 am |
|
 |
toothlesswonder
MMT Pro Member
Joined: Sun Sep 25, 2011 2:32 pm Posts: 125
|
 Re: Sizing my new hull. Is narrow faster?
Test driving is tough. I dont know of any guys in my area running custom hulls. Know of a few gator traxx, and ive driven them, but I'm looking at a custom boat. Im leaning towards an 18x48 so far
_________________ uncle j 2048 / gtr 35
|
Sat Dec 03, 2011 1:04 pm |
|
 |
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 Sizing my new hull. Is narrow faster?
Where u located?
|
Sat Dec 03, 2011 1:10 pm |
|
 |
toothlesswonder
MMT Pro Member
Joined: Sun Sep 25, 2011 2:32 pm Posts: 125
|
 Sizing my new hull. Is narrow faster?
San Antonio
_________________ uncle j 2048 / gtr 35
|
Sat Dec 03, 2011 3:05 pm |
|
 |
JIMMY W
MMT 1000 Club
Joined: Tue Jan 13, 2009 8:02 pm Posts: 4534 Location: South Louisiana
|
 Re: Sizing my new hull. Is narrow faster?
It all depends on what you haul and what type terrain you run 
_________________ 17/54 GT EXTREME Center Console, Huntdeck w/ GTR 35
Hoyt Mods and some other goodies
|
Sat Dec 03, 2011 3:56 pm |
|
 |
muddoctor
MMT Sponsor
Joined: Thu Jan 22, 2009 8:38 am Posts: 649
|
 Re: Sizing my new hull. Is narrow faster?
1856 Phowler with that motor will carry that load in the mid 20s, add a forth guy and full gear and you will be 21-22 ish with the mods you are considering. Biggest issue is that the boat will draft less which will get it on plane quicker from a shallow start.
PW
_________________ Paul V. Willging - Owner Phowler Boat Company Illowa Marine
1701 Main Avenue, Clinton, Iowa 52732 563-242-8969 or cell 563-212-7091 email: larrys-prodrive@mchsi.com
http://www.larrysillowamarine.com
|
Tue Dec 06, 2011 12:36 pm |
|
 |
msm8281
MMT Elite Member
Joined: Fri Oct 09, 2009 1:50 pm Posts: 9673 Location: New Iberia, La.
|
 Re: Sizing my new hull. Is narrow faster?
i have a 52" and i wouldn't go any smaller
|
Tue Dec 06, 2011 12:38 pm |
|
 |
Bayoublackhunter
MMT 1000 Club
Joined: Sat Oct 02, 2010 4:55 pm Posts: 1192 Location: BAYOU BLACK
|
 Re: Sizing my new hull. Is narrow faster?
I love my 54
Sent from my Evo 4G 3D
_________________ 35gtr on a 1854 Deep South Custom 1436 flat pushed by a 16 GDLT
|
Tue Dec 06, 2011 1:05 pm |
|
 |
schmitt
MMT 1000 Club
Joined: Fri Jun 25, 2010 3:33 pm Posts: 1177 Location: WI
|
 Re: Sizing my new hull. Is narrow faster?
_________________ 1848 DeadFowl pushed by a Stage 4 Delta powered MB HDR (JBP dusting)
|
Tue Dec 06, 2011 1:22 pm |
|
 |
|