It is currently Sat May 10, 2025 6:52 am




Reply to topic  [ 10 posts ] 
 First test of Hammer prop on Gen 4 PD 
Author Message
MMT Pro Member

Joined: Tue Aug 16, 2016 10:17 pm
Posts: 135
Location: Raceland, LA
Post First test of Hammer prop on Gen 4 PD

Finally got the Hammer prop out to run in some bad stuff. All I can say is that it's awesome on the PD. It's not the fastest prop I have, which it's not made to be, but this thing will plane off so quick it's crazy even in heavy veggies and nasty stuff. I did hit some mud with it, which was quite uneventful so I didn't even bother putting it in the video because it takes off better in mud than in the water. In very shallow water full of nasty veggies the thing is nothing short of amazing. When it bites you better be holding on...several times I almost flipped out of the boat when the thing grabbed and took off.

_________________
PD 37 EFI
PD 18x54 CC X-Series
Rigid Industries 20" Light Bar
Delta Performance Level 3
Hammer Prop


Thu Dec 22, 2016 11:22 pm
Profile
MMT Sponsor

Joined: Fri Jan 10, 2014 1:16 pm
Posts: 2107
Location: Gladewater TX
Post Re: First test of Hammer prop on Gen 4 PD
Damn you run the shit outta that! Good video :D


Fri Dec 23, 2016 12:00 am
Profile
MMT Pro Member

Joined: Sun Sep 01, 2013 1:05 pm
Posts: 213
Location: Wake Forest, NC
Post Re: First test of Hammer prop on Gen 4 PD
Damn, that was some pretty impressive shit you worked your way out of!

_________________
1854 CC backyard build with GTR 37 EFI

Build thread here.. viewtopic.php?f=4&t=66815


Tue Dec 27, 2016 10:37 am
Profile
MMT 1000 Club
User avatar

Joined: Wed Feb 18, 2009 6:43 pm
Posts: 3958
Location: Centerville, La
Post Re: First test of Hammer prop on Gen 4 PD
Who you got it from

_________________
I gave up mud motors


Tue Dec 27, 2016 5:33 pm
Profile
MMT Elite Member
User avatar

Joined: Mon Feb 06, 2012 6:13 pm
Posts: 5605
Location: D'town, LA
Post Re: First test of Hammer prop on Gen 4 PD


Tue Dec 27, 2016 5:53 pm
Profile
MMT Pro Member

Joined: Tue Aug 16, 2016 10:17 pm
Posts: 135
Location: Raceland, LA
Post Re: First test of Hammer prop on Gen 4 PD
Chris at LA Propeller got it hubbed up for my gen 4. He can get them hubbed for any PD. It is a little slower prop, but the thing eats like crazy in the nasty. Hauls a load pretty good too. He's also working up some other props that we'll be testing out for the PD soon. Some two blades and some three blades.

_________________
PD 37 EFI
PD 18x54 CC X-Series
Rigid Industries 20" Light Bar
Delta Performance Level 3
Hammer Prop


Tue Dec 27, 2016 7:19 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Feb 18, 2009 6:43 pm
Posts: 3958
Location: Centerville, La
Post Re: First test of Hammer prop on Gen 4 PD
I want something that bites better in mud and nasty shit. I can bang rev limiter with my stock prop too easy.

_________________
I gave up mud motors


Thu Dec 29, 2016 8:00 pm
Profile
MMT Pro Member

Joined: Tue Aug 16, 2016 10:17 pm
Posts: 135
Location: Raceland, LA
Post Re: First test of Hammer prop on Gen 4 PD

_________________
PD 37 EFI
PD 18x54 CC X-Series
Rigid Industries 20" Light Bar
Delta Performance Level 3
Hammer Prop


Thu Dec 29, 2016 8:27 pm
Profile
MMT Elite Member
User avatar

Joined: Mon Feb 06, 2012 6:13 pm
Posts: 5605
Location: D'town, LA
Post Re: First test of Hammer prop on Gen 4 PD


Thu Dec 29, 2016 9:14 pm
Profile
MMT Pro Member

Joined: Tue Aug 16, 2016 10:17 pm
Posts: 135
Location: Raceland, LA
Post Re: First test of Hammer prop on Gen 4 PD
If you are even lucky enough to run the power tech without it slinging a blade. What they should do is take the shovel prop, which was a good prop and tone that thing down so it can be ran on gen 4's.

_________________
PD 37 EFI
PD 18x54 CC X-Series
Rigid Industries 20" Light Bar
Delta Performance Level 3
Hammer Prop


Thu Dec 29, 2016 9:22 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 10 posts ] 

Who is online

Users browsing this forum: No registered users and 100 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: