It is currently Sun Jul 13, 2025 6:46 am




Reply to topic  [ 25 posts ] 
 27 kohler Beavertail on 1448 Jonny 
Author Message
MMT Member
User avatar

Joined: Wed Nov 11, 2009 2:17 pm
Posts: 22
Post 27 kohler Beavertail on 1448 Jonny
I have a 14x48 Jon boat with a 27 beavertail, right now the boat seems to plow. Has anyone tried the Beavertail pods or adding pods to see if it will help the boat plain off?

I would hope so since the pods make the boat longer and add floatation. Any feedback would be great.

_________________
14x48 Polar Kraft
27hp Beavertail LT
25hp Yamaha


Mon Oct 18, 2010 3:10 pm
Profile
MMT Pro Member

Joined: Mon Oct 04, 2010 1:09 pm
Posts: 315
Post Re: 27 kohler Beavertail on 1448 Jonny
Wouldnt hurt to try. the only other thing is to get a longer boat.

_________________
TRYIN' TO LEAVE A CARBON FOOT PRINT!
BUMMIN RIDES AT THE MOMENT, UNDER CONSTRUCTION!


Mon Oct 18, 2010 3:12 pm
Profile
MMT Pro Member

Joined: Mon Oct 04, 2010 1:09 pm
Posts: 315
Post Re: 27 kohler Beavertail on 1448 Jonny
where is your gas tank and all that located. try moving all weight to the front when you run by yourself

_________________
TRYIN' TO LEAVE A CARBON FOOT PRINT!
BUMMIN RIDES AT THE MOMENT, UNDER CONSTRUCTION!


Mon Oct 18, 2010 3:13 pm
Profile
MMT Member
User avatar

Joined: Wed Nov 11, 2009 2:17 pm
Posts: 22
Post Re: 27 kohler Beavertail on 1448 Jonny
was all in the back, I am moving it (battery and gas tank for the front)

_________________
14x48 Polar Kraft
27hp Beavertail LT
25hp Yamaha


Mon Oct 18, 2010 3:22 pm
Profile
MMT Addict

Joined: Sun Jan 10, 2010 12:23 pm
Posts: 519
Location: West Monroe, LA
Post Re: 27 kohler Beavertail on 1448 Jonny
im runnin a 25 LT on a 1448 and it doesnt plow with jus me, and another person or two then it does! but if it were me i would go with a full huntdeck instead of pods. serves more purposes

_________________
Gatortail 1846 35hp GTR with calens stage 2 mods


Mon Oct 18, 2010 6:06 pm
Profile
MMT Pro Member
User avatar

Joined: Thu Jan 15, 2009 1:24 am
Posts: 455
Post Re: 27 kohler Beavertail on 1448 Jonny
have you checked your prop? it sounds like your prop is worn down to much.. that motor on that boat shouldnt have that much of a problem getting up on plane.


Tue Oct 19, 2010 2:33 am
Profile
MMT Pro Member

Joined: Wed Jan 14, 2009 3:44 pm
Posts: 79
Post Re: 27 kohler Beavertail on 1448 Jonny
I run the same motor on a 1444... It should not plow... it should plane but isn't extremely fast... one person, gas, battery... you should have no issue plowing... check the prop for sure...


Tue Oct 19, 2010 6:30 am
Profile
MMT Pro Member

Joined: Mon Oct 04, 2010 1:09 pm
Posts: 315
Post Re: 27 kohler Beavertail on 1448 Jonny
Im running A 16 hp on a 14x36 with a worn prop and have no trouble with planning off with two pep and gear. Might have some motor issues?

_________________
TRYIN' TO LEAVE A CARBON FOOT PRINT!
BUMMIN RIDES AT THE MOMENT, UNDER CONSTRUCTION!


Tue Oct 19, 2010 7:48 am
Profile
MMT Member

Joined: Mon Oct 04, 2010 7:38 am
Posts: 13
Post Re: 27 kohler Beavertail on 1448 Jonny
I'm running a 27 beavertail on a 1448 jon and I get 22 mph (gps) with just me and a few gallons of gas. 2 people I can get around 18-19 depending on load. I have a custom dual exhaust, new prop and a fairly empty boat. I have never had any problems with planing out though.


Tue Oct 19, 2010 10:52 am
Profile
MMT Member
User avatar

Joined: Wed Nov 11, 2009 2:17 pm
Posts: 22
Post Re: 27 kohler Beavertail on 1448 Jonny
prop is brand new maybe has 2 hours on it, I think it might be a weight problem since I weight 210 lbs and then the gas tank and battery in back of boat.

_________________
14x48 Polar Kraft
27hp Beavertail LT
25hp Yamaha


Tue Oct 19, 2010 2:43 pm
Profile
MMT Member

Joined: Mon Oct 04, 2010 7:38 am
Posts: 13
Post Re: 27 kohler Beavertail on 1448 Jonny
Yeah I weigh in about the same as you. I've got my gas tank in the front and two big deep cycle batteries in the rear. Sounds like you might be looking at some engine troubles. You should definatly be able to plane that boat out easily with that motor. Good luck!


Tue Oct 19, 2010 6:03 pm
Profile
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6060
Location: Choudrant, La
Post Re: 27 kohler Beavertail on 1448 Jonny
what condition is the bottom of the hull in?

_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Tue Oct 19, 2010 6:25 pm
Profile
MMT Pro Member

Joined: Mon Oct 04, 2010 1:09 pm
Posts: 315
Post Re: 27 kohler Beavertail on 1448 Jonny
Same here im 230 and battery in the back gas tank in middle, look under the boat by the transom. sometimes the boat has a small hook by the back of the boat that will cause big prob for speeds and running

_________________
TRYIN' TO LEAVE A CARBON FOOT PRINT!
BUMMIN RIDES AT THE MOMENT, UNDER CONSTRUCTION!


Wed Oct 20, 2010 1:46 pm
Profile
MMT Member
User avatar

Joined: Wed Nov 11, 2009 2:17 pm
Posts: 22
Post Re: 27 kohler Beavertail on 1448 Jonny
Im gonna clean the carbs real good and put some new gas in, it seems like the last time I ran it is was acting up a little like bad gas.

What about installing pods, think I should wait and see how the motor ends up, hopefully just some minor problems, but I have the trusty 25 yamaha to keep the boat in the water and keep my duck scouting/hunting.

_________________
14x48 Polar Kraft
27hp Beavertail LT
25hp Yamaha


Wed Oct 20, 2010 6:17 pm
Profile
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6060
Location: Choudrant, La
Post Re: 27 kohler Beavertail on 1448 Jonny
Please go check and see if your hull has dents in the bottom right before the braces, especially near the transom.

Before i put pods on that one, I would keep the yammerhammer on it and buy like a 16x44 gd boat for your lt.

_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Wed Oct 20, 2010 7:01 pm
Profile
MMT Pro Member

Joined: Mon Oct 04, 2010 1:09 pm
Posts: 315
Post Re: 27 kohler Beavertail on 1448 Jonny
I had one that had a dent by the transom and got another boat made all diff in the world, that how i found my prob

_________________
TRYIN' TO LEAVE A CARBON FOOT PRINT!
BUMMIN RIDES AT THE MOMENT, UNDER CONSTRUCTION!


Thu Oct 21, 2010 7:09 am
Profile
MMT Member
User avatar

Joined: Wed Nov 11, 2009 2:17 pm
Posts: 22
Post Re: 27 kohler Beavertail on 1448 Jonny
hull is in good shape, no dents by the transom, as far as i can see no hooks in the bottom.

_________________
14x48 Polar Kraft
27hp Beavertail LT
25hp Yamaha


Thu Oct 21, 2010 3:17 pm
Profile
MMT Pro Member

Joined: Tue Oct 13, 2009 3:31 pm
Posts: 202
Location: NJ
Post Re: 27 kohler Beavertail on 1448 Jonny
do you know your rpm's? if not i'd start with a tach...i run the same size boat with a 25 and no problems planing out


Thu Oct 21, 2010 6:39 pm
Profile
MMT Pro Member

Joined: Mon Oct 04, 2010 1:09 pm
Posts: 315
Post Re: 27 kohler Beavertail on 1448 Jonny
what pitch prop you have

_________________
TRYIN' TO LEAVE A CARBON FOOT PRINT!
BUMMIN RIDES AT THE MOMENT, UNDER CONSTRUCTION!


Fri Oct 22, 2010 7:41 am
Profile
MMT Member
User avatar

Joined: Wed Nov 11, 2009 2:17 pm
Posts: 22
Post Re: 27 kohler Beavertail on 1448 Jonny
Prop = 9x6
rpms = 3850-3900
I took the carbs off and cleaned, it seems like it is not getting gas or has bad spark, so I took the plugs out and they are super black, so Im gonna get new ones and replace the inline-fuel filter.

_________________
14x48 Polar Kraft
27hp Beavertail LT
25hp Yamaha


Sun Oct 24, 2010 9:37 am
Profile
MMT Pro Member

Joined: Wed Jan 14, 2009 3:44 pm
Posts: 79
Post Re: 27 kohler Beavertail on 1448 Jonny
BT site says to run a 9x7.... lotta guys on here say 9x6 tho...


Tue Oct 26, 2010 6:53 am
Profile
MMT Pro Member

Joined: Wed Jan 14, 2009 3:44 pm
Posts: 79
Post Re: 27 kohler Beavertail on 1448 Jonny
Prob. not the prop if it is in good shape though...


Tue Oct 26, 2010 6:53 am
Profile
MMT Pro Member

Joined: Mon Oct 04, 2010 1:09 pm
Posts: 315
Post Re: 27 kohler Beavertail on 1448 Jonny
what they say for a 16 hp go devil

_________________
TRYIN' TO LEAVE A CARBON FOOT PRINT!
BUMMIN RIDES AT THE MOMENT, UNDER CONSTRUCTION!


Tue Oct 26, 2010 12:31 pm
Profile
MMT Sponsor
User avatar

Joined: Thu Sep 16, 2010 10:32 pm
Posts: 4036
Location: Gonzales La
Post Re: 27 kohler Beavertail on 1448 Jonny


Tue Oct 26, 2010 12:36 pm
Profile WWW
MMT Pro Member

Joined: Mon Oct 04, 2010 1:09 pm
Posts: 315
Post Re: 27 kohler Beavertail on 1448 Jonny
wonder if i could step up because of the super light boat and gear

_________________
TRYIN' TO LEAVE A CARBON FOOT PRINT!
BUMMIN RIDES AT THE MOMENT, UNDER CONSTRUCTION!


Tue Oct 26, 2010 12:42 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 25 posts ] 

Who is online

Users browsing this forum: No registered users and 51 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: