Author |
Message |
fowlmouth
MMT Member
Joined: Wed Nov 11, 2009 2:17 pm Posts: 22
|
 27 kohler Beavertail on 1448 Jonny
I have a 14x48 Jon boat with a 27 beavertail, right now the boat seems to plow. Has anyone tried the Beavertail pods or adding pods to see if it will help the boat plain off?
I would hope so since the pods make the boat longer and add floatation. Any feedback would be great.
_________________ 14x48 Polar Kraft 27hp Beavertail LT 25hp Yamaha
|
Mon Oct 18, 2010 3:10 pm |
|
 |
Cammander26
MMT Pro Member
Joined: Mon Oct 04, 2010 1:09 pm Posts: 315
|
 Re: 27 kohler Beavertail on 1448 Jonny
Wouldnt hurt to try. the only other thing is to get a longer boat.
_________________ TRYIN' TO LEAVE A CARBON FOOT PRINT! BUMMIN RIDES AT THE MOMENT, UNDER CONSTRUCTION!
|
Mon Oct 18, 2010 3:12 pm |
|
 |
Cammander26
MMT Pro Member
Joined: Mon Oct 04, 2010 1:09 pm Posts: 315
|
 Re: 27 kohler Beavertail on 1448 Jonny
where is your gas tank and all that located. try moving all weight to the front when you run by yourself
_________________ TRYIN' TO LEAVE A CARBON FOOT PRINT! BUMMIN RIDES AT THE MOMENT, UNDER CONSTRUCTION!
|
Mon Oct 18, 2010 3:13 pm |
|
 |
fowlmouth
MMT Member
Joined: Wed Nov 11, 2009 2:17 pm Posts: 22
|
 Re: 27 kohler Beavertail on 1448 Jonny
was all in the back, I am moving it (battery and gas tank for the front)
_________________ 14x48 Polar Kraft 27hp Beavertail LT 25hp Yamaha
|
Mon Oct 18, 2010 3:22 pm |
|
 |
Orangefoot
MMT Addict
Joined: Sun Jan 10, 2010 12:23 pm Posts: 519 Location: West Monroe, LA
|
 Re: 27 kohler Beavertail on 1448 Jonny
im runnin a 25 LT on a 1448 and it doesnt plow with jus me, and another person or two then it does! but if it were me i would go with a full huntdeck instead of pods. serves more purposes
_________________ Gatortail 1846 35hp GTR with calens stage 2 mods
|
Mon Oct 18, 2010 6:06 pm |
|
 |
GeeLeDouche
MMT Pro Member
Joined: Thu Jan 15, 2009 1:24 am Posts: 455
|
 Re: 27 kohler Beavertail on 1448 Jonny
have you checked your prop? it sounds like your prop is worn down to much.. that motor on that boat shouldnt have that much of a problem getting up on plane.
|
Tue Oct 19, 2010 2:33 am |
|
 |
Mississippi Hunter
MMT Pro Member
Joined: Wed Jan 14, 2009 3:44 pm Posts: 79
|
 Re: 27 kohler Beavertail on 1448 Jonny
I run the same motor on a 1444... It should not plow... it should plane but isn't extremely fast... one person, gas, battery... you should have no issue plowing... check the prop for sure...
|
Tue Oct 19, 2010 6:30 am |
|
 |
Cammander26
MMT Pro Member
Joined: Mon Oct 04, 2010 1:09 pm Posts: 315
|
 Re: 27 kohler Beavertail on 1448 Jonny
Im running A 16 hp on a 14x36 with a worn prop and have no trouble with planning off with two pep and gear. Might have some motor issues?
_________________ TRYIN' TO LEAVE A CARBON FOOT PRINT! BUMMIN RIDES AT THE MOMENT, UNDER CONSTRUCTION!
|
Tue Oct 19, 2010 7:48 am |
|
 |
Mbarron634
MMT Member
Joined: Mon Oct 04, 2010 7:38 am Posts: 13
|
 Re: 27 kohler Beavertail on 1448 Jonny
I'm running a 27 beavertail on a 1448 jon and I get 22 mph (gps) with just me and a few gallons of gas. 2 people I can get around 18-19 depending on load. I have a custom dual exhaust, new prop and a fairly empty boat. I have never had any problems with planing out though.
|
Tue Oct 19, 2010 10:52 am |
|
 |
fowlmouth
MMT Member
Joined: Wed Nov 11, 2009 2:17 pm Posts: 22
|
 Re: 27 kohler Beavertail on 1448 Jonny
prop is brand new maybe has 2 hours on it, I think it might be a weight problem since I weight 210 lbs and then the gas tank and battery in back of boat.
_________________ 14x48 Polar Kraft 27hp Beavertail LT 25hp Yamaha
|
Tue Oct 19, 2010 2:43 pm |
|
 |
Mbarron634
MMT Member
Joined: Mon Oct 04, 2010 7:38 am Posts: 13
|
 Re: 27 kohler Beavertail on 1448 Jonny
Yeah I weigh in about the same as you. I've got my gas tank in the front and two big deep cycle batteries in the rear. Sounds like you might be looking at some engine troubles. You should definatly be able to plane that boat out easily with that motor. Good luck!
|
Tue Oct 19, 2010 6:03 pm |
|
 |
Woodiebuster
MMT Elite Member
Joined: Wed Mar 03, 2010 7:00 pm Posts: 6060 Location: Choudrant, La
|
 Re: 27 kohler Beavertail on 1448 Jonny
what condition is the bottom of the hull in?
_________________ CSM Custom 18x42 Battleship with a 36 PD beating you to the hole My Rig (Old Motor) viewtopic.php?f=5&t=45193
(New Motor) viewtopic.php?f=5&t=54733 Stumps Fear Me
|
Tue Oct 19, 2010 6:25 pm |
|
 |
Cammander26
MMT Pro Member
Joined: Mon Oct 04, 2010 1:09 pm Posts: 315
|
 Re: 27 kohler Beavertail on 1448 Jonny
Same here im 230 and battery in the back gas tank in middle, look under the boat by the transom. sometimes the boat has a small hook by the back of the boat that will cause big prob for speeds and running
_________________ TRYIN' TO LEAVE A CARBON FOOT PRINT! BUMMIN RIDES AT THE MOMENT, UNDER CONSTRUCTION!
|
Wed Oct 20, 2010 1:46 pm |
|
 |
fowlmouth
MMT Member
Joined: Wed Nov 11, 2009 2:17 pm Posts: 22
|
 Re: 27 kohler Beavertail on 1448 Jonny
Im gonna clean the carbs real good and put some new gas in, it seems like the last time I ran it is was acting up a little like bad gas.
What about installing pods, think I should wait and see how the motor ends up, hopefully just some minor problems, but I have the trusty 25 yamaha to keep the boat in the water and keep my duck scouting/hunting.
_________________ 14x48 Polar Kraft 27hp Beavertail LT 25hp Yamaha
|
Wed Oct 20, 2010 6:17 pm |
|
 |
Woodiebuster
MMT Elite Member
Joined: Wed Mar 03, 2010 7:00 pm Posts: 6060 Location: Choudrant, La
|
 Re: 27 kohler Beavertail on 1448 Jonny
Please go check and see if your hull has dents in the bottom right before the braces, especially near the transom.
Before i put pods on that one, I would keep the yammerhammer on it and buy like a 16x44 gd boat for your lt.
_________________ CSM Custom 18x42 Battleship with a 36 PD beating you to the hole My Rig (Old Motor) viewtopic.php?f=5&t=45193
(New Motor) viewtopic.php?f=5&t=54733 Stumps Fear Me
|
Wed Oct 20, 2010 7:01 pm |
|
 |
Cammander26
MMT Pro Member
Joined: Mon Oct 04, 2010 1:09 pm Posts: 315
|
 Re: 27 kohler Beavertail on 1448 Jonny
I had one that had a dent by the transom and got another boat made all diff in the world, that how i found my prob
_________________ TRYIN' TO LEAVE A CARBON FOOT PRINT! BUMMIN RIDES AT THE MOMENT, UNDER CONSTRUCTION!
|
Thu Oct 21, 2010 7:09 am |
|
 |
fowlmouth
MMT Member
Joined: Wed Nov 11, 2009 2:17 pm Posts: 22
|
 Re: 27 kohler Beavertail on 1448 Jonny
hull is in good shape, no dents by the transom, as far as i can see no hooks in the bottom.
_________________ 14x48 Polar Kraft 27hp Beavertail LT 25hp Yamaha
|
Thu Oct 21, 2010 3:17 pm |
|
 |
rob_rides_03
MMT Pro Member
Joined: Tue Oct 13, 2009 3:31 pm Posts: 202 Location: NJ
|
 Re: 27 kohler Beavertail on 1448 Jonny
do you know your rpm's? if not i'd start with a tach...i run the same size boat with a 25 and no problems planing out
|
Thu Oct 21, 2010 6:39 pm |
|
 |
Cammander26
MMT Pro Member
Joined: Mon Oct 04, 2010 1:09 pm Posts: 315
|
 Re: 27 kohler Beavertail on 1448 Jonny
what pitch prop you have
_________________ TRYIN' TO LEAVE A CARBON FOOT PRINT! BUMMIN RIDES AT THE MOMENT, UNDER CONSTRUCTION!
|
Fri Oct 22, 2010 7:41 am |
|
 |
fowlmouth
MMT Member
Joined: Wed Nov 11, 2009 2:17 pm Posts: 22
|
 Re: 27 kohler Beavertail on 1448 Jonny
Prop = 9x6 rpms = 3850-3900 I took the carbs off and cleaned, it seems like it is not getting gas or has bad spark, so I took the plugs out and they are super black, so Im gonna get new ones and replace the inline-fuel filter.
_________________ 14x48 Polar Kraft 27hp Beavertail LT 25hp Yamaha
|
Sun Oct 24, 2010 9:37 am |
|
 |
Mississippi Hunter
MMT Pro Member
Joined: Wed Jan 14, 2009 3:44 pm Posts: 79
|
 Re: 27 kohler Beavertail on 1448 Jonny
BT site says to run a 9x7.... lotta guys on here say 9x6 tho...
|
Tue Oct 26, 2010 6:53 am |
|
 |
Mississippi Hunter
MMT Pro Member
Joined: Wed Jan 14, 2009 3:44 pm Posts: 79
|
 Re: 27 kohler Beavertail on 1448 Jonny
Prob. not the prop if it is in good shape though...
|
Tue Oct 26, 2010 6:53 am |
|
 |
Cammander26
MMT Pro Member
Joined: Mon Oct 04, 2010 1:09 pm Posts: 315
|
 Re: 27 kohler Beavertail on 1448 Jonny
what they say for a 16 hp go devil
_________________ TRYIN' TO LEAVE A CARBON FOOT PRINT! BUMMIN RIDES AT THE MOMENT, UNDER CONSTRUCTION!
|
Tue Oct 26, 2010 12:31 pm |
|
 |
autogateman
MMT Sponsor
Joined: Thu Sep 16, 2010 10:32 pm Posts: 4036 Location: Gonzales La
|
 Re: 27 kohler Beavertail on 1448 Jonny
|
Tue Oct 26, 2010 12:36 pm |
|
 |
Cammander26
MMT Pro Member
Joined: Mon Oct 04, 2010 1:09 pm Posts: 315
|
 Re: 27 kohler Beavertail on 1448 Jonny
wonder if i could step up because of the super light boat and gear
_________________ TRYIN' TO LEAVE A CARBON FOOT PRINT! BUMMIN RIDES AT THE MOMENT, UNDER CONSTRUCTION!
|
Tue Oct 26, 2010 12:42 pm |
|
 |
|