Sounds pretty cool, be sure that PD tiller can clear the huntdeck

Would need an extension.

FYI...for the PD guys wanting Jackplates be sure that the boat builder knows your plan. If you get the center of gravity to high on you transoms you will increase the force on the transom during operation.

I had the saem idea for mine, but after i busted the transom i decided not.

I hate to even contribute to this thread, but does anybody have any experience with a jack plate with a MM? I am thinking about adding one, to drop my motor about an inch. Transom is at 16 3/4 with a short shaft motor designed for a 16 inch. Not sure if it will hold though in the thick stuff. Any experience or thoughts? I was not going to get the hydraulic, as this is just one more thing to go wrong, but I like where your heads at J.

Send triple threat a pm he has them on his dual rig.

If you anyone is thinking of really doing this I highly recommend NOT getting a Detwiller Hydro jackplate. I got one one my bass boat and its garbage. The seals constantly leak fluid and the pump is situated to where you cant get to it without having a floor jack to pick it back up and put fluid in it. This has been my experience with them. I do like the idea of having one for that extra leverage exspecially when you are high centered and the prop is just above the water.