It is currently Mon Aug 04, 2025 7:45 am




Reply to topic  [ 9 posts ] 
 Shepabs from Maine and California 
Author Message
MMT Pro Member
User avatar

Joined: Wed Aug 19, 2009 5:24 pm
Posts: 82
Post Shepabs from Maine and California
Sure are a lot of rebels on here!!!

I'm from Maine but currently working in NorCal for a while. Picked up a G3 with a 60hp Yamaha out here and repowered it with a 27 prodrive!!

I'm enjoying the chatter on here and learning a few things!


Fri Sep 18, 2009 1:36 pm
Profile
MMT Pro Member

Joined: Mon Jan 26, 2009 10:04 am
Posts: 480
Location: Laplace, LA
Post Re: Shepabs from Maine and California
Welcome. What NGK plugs are you running in the 27? How much is the 3 blade prop?

Thanks,

_________________
1754 PD Center Console, 60 Yammy, w jack plate


Fri Sep 18, 2009 3:32 pm
Profile
MMT Pro Member
User avatar

Joined: Wed Feb 11, 2009 9:47 am
Posts: 351
Location: Fresno, Ca
Post Re: Shepabs from Maine and California
What part of NorCal you in.

_________________
1652 w/ MB Mini 35


Fri Sep 18, 2009 4:47 pm
Profile
MMT Pro Member
User avatar

Joined: Wed Aug 19, 2009 5:24 pm
Posts: 82
Post Re: Shepabs from Maine and California
It came with the 3 bladed prop.. Wasn't anything special other than I ordered the manual reverse.

I'll get the plug number when I get home tonight and post it up.

I'm working up in Eureka and living in Ferndale. Behind the Redwood curtain!


Fri Sep 18, 2009 5:57 pm
Profile
MMT 1000 Club
User avatar

Joined: Mon Mar 02, 2009 9:25 pm
Posts: 1096
Location: Morgan City
Post Re: Shepabs from Maine and California
What kinda speeds are you getting out of that rig????

_________________
1754 GT EXTREME 37EFI


Fri Sep 18, 2009 6:09 pm
Profile
MMT Pro Member
User avatar

Joined: Wed Aug 19, 2009 5:24 pm
Posts: 82
Post Re: Shepabs from Maine and California
I hate Champion Plugs!! So I replaced them with NGK 2477 Iridium plugs.
They were about $8 and some change apiece. I think they make that 27 more responsive and smoother.

The NGK's gap at .032 instead of the .028 for the Champs. Both plugs were the same heat range according to the comp chart I used.

I haven't GPS'd my top speed yet but plan to this weekend, I'll post up the stats on she does with that 3 bladed prop.


Fri Sep 18, 2009 6:55 pm
Profile
MMT 1000 Club
User avatar

Joined: Tue Jun 16, 2009 8:27 pm
Posts: 1803
Location: Belle Chasse La.
Post Re: Shepabs from Maine and California
kool


Sat Sep 19, 2009 10:12 am
Profile YIM
MMT Pro Member
User avatar

Joined: Wed Aug 19, 2009 5:24 pm
Posts: 82
Post Re: Shepabs from Maine and California
I've got major problems with my new GPS. It's lost!! Doesn't know where it is or how fast it's going. Took the boat out today and took the one out of my truck. Best I could do with 2 guys and 120 pounds of lead in the bow was 17.5 mph. A little disappointing but the boat is pretty wide.. If I was hunting bigger areas, I might want a little more speed but this will do me fine.

Some excitment though, We were whipping up a brush and tree lined slough that was about 15 feet wide and going full tilt. Had a nice blacktail buck leap up off his bed next to the slough and almost jump into the boat!!!
Saw 2 other nice racked bucks and could have shot both easily. Got to within 30 feet of one before he jumped the slough and scurried off.
The other nice buck we saw standing in a treeline about 50 yards from the slough. Also saw 2 does, one of them also almost jumped into the boat.

If a deer tag wasn't an extra $250 on top of my nonresident hunting license, I'd have me one of those deer hanging in the garage right now.


Sun Sep 20, 2009 9:35 pm
Profile
MMT Pro Member

Joined: Mon Jan 26, 2009 10:04 am
Posts: 480
Location: Laplace, LA
Post Re: Shepabs from Maine and California
Sounds like fun Shepabs. thanks for the info.

_________________
1754 PD Center Console, 60 Yammy, w jack plate


Tue Sep 22, 2009 1:19 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 9 posts ] 

Who is online

Users browsing this forum: No registered users and 129 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: