It is currently Mon Jul 21, 2025 5:25 am




Reply to topic  [ 54 posts ]  Go to page 1, 2  Next
 Prodigy 1854 
Author Message
MMT Sponsor

Joined: Wed Jul 20, 2011 9:51 am
Posts: 488
Post Prodigy 1854
This is my personal boat....... It was built to be open and functional. I like space on the inside of my boat and hate clutter and things getting in the way............Every small detail has a purpose.

Options

1854
.125
5086
longitudinal stringers
V Rake
Rear Drop Deck
Catwalks
Rear Catwalk Bench
45 degree corners in rear
large deck hatch
extended deck
trolling motor plug and bracket
dual spud holes up front which can also be used for a spotlight/winch setup
shark eyes
full floors
recessed bracing
battery inside drop deck
13 gallon permanent fuel tank
deck filler
green LED lights under all flat surfaces
6 switch panel
1500 GPH Rule Bilge
hydroturf
Prodigy Bottoms Camo
Gator Glide
tall transom
dual drain plugs
grab bar
4 cup holders

MudBuddy Black Death 4500
Tall Transom
32" out drive
carb cover
painted Prodigy Bottoms

Magic Tilt Alum trailer
4 6" bunks
carpeted fender pads
side guides
14" custom rims and tires


You do not have the required permissions to view the files attached to this post.

_________________
Prodigy Boats
https://www.facebook.com/Prodigyboats
www.prodigyboats.com
Contact for info - http://prodigyboats.com/contact-us/
706-253-7766


Mon Dec 30, 2013 10:30 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 8:18 pm
Posts: 4915
Location: Lake Jackson, TX
Post Re: Prodigy 1854
Clean boat!

_________________
37 PD EFI FPR 18x48 Tiller
SOLD -- 36 PD EFI FPR 18x48 Stick Steer
SOLD -- 27 PD FPR 16x36 Skiff


Mon Dec 30, 2013 10:43 pm
Profile
MMT 1000 Club

Joined: Tue Jan 15, 2013 5:25 pm
Posts: 1723
Location: Oxford/Jackson ms
Post Re: Prodigy 1854
That the one from the video you posted a few weeks ago? Damn fine lookin boat man you and Corey from cottonmouth are puttin out some of my favorite boats around lately.. Keep up the good work

_________________
1436 tin can shoved by a 16 GDLT
16.5x48 running like hell from a built 40 merc

Well they call me king turd up here on shit mountain, but if you want it you can have the crown.


Tue Dec 31, 2013 12:17 am
Profile
MMT Sponsor
User avatar

Joined: Mon Jun 13, 2011 8:49 am
Posts: 3260
Post Re: Prodigy 1854
What do you want for it?

_________________
http://www.gatorglide.com/

gatorheads@comcast.net


Tue Dec 31, 2013 4:14 am
Profile WWW
MMT Sponsor

Joined: Wed Jul 20, 2011 9:51 am
Posts: 488
Post Re: Prodigy 1854
No this is a diff one.. That one was a 1754

_________________
Prodigy Boats
https://www.facebook.com/Prodigyboats
www.prodigyboats.com
Contact for info - http://prodigyboats.com/contact-us/
706-253-7766


Tue Dec 31, 2013 5:59 am
Profile
MMT 1000 Club

Joined: Wed Jan 18, 2012 7:21 pm
Posts: 2207
Location: North Alabama
Post Re: Prodigy 1854
Finally got you your boat, looks awesome bra. I'm still shocked you don't have a 7000 hanging off the back! But that is still one sexy ass rig.

Sent from my DROID RAZR using Tapatalk

_________________
2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD

2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD


Tue Dec 31, 2013 6:27 am
Profile
MMT 1000 Club
User avatar

Joined: Tue Jan 03, 2012 9:06 am
Posts: 3673
Location: Prarieville,LA
Post Re: Prodigy 1854
what gas tank is that?

_________________
1754 GTR Xtreme CC w/ Purple Kool-aid Additives

Never Forget our Fallen Soliders


Tue Dec 31, 2013 6:44 am
Profile
MMT 1000 Club

Joined: Wed Jan 18, 2012 7:21 pm
Posts: 2207
Location: North Alabama
Post Re: Prodigy 1854
Believe its a moeller permanent 13, correct me if I'm wrong Chad

Sent from my DROID RAZR using Tapatalk

_________________
2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD

2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD


Tue Dec 31, 2013 6:58 am
Profile
MMT 1000 Club
User avatar

Joined: Tue Jan 03, 2012 9:06 am
Posts: 3673
Location: Prarieville,LA
Post Re: Prodigy 1854

_________________
1754 GTR Xtreme CC w/ Purple Kool-aid Additives

Never Forget our Fallen Soliders


Tue Dec 31, 2013 7:01 am
Profile
MMT 1000 Club

Joined: Wed Jan 18, 2012 7:21 pm
Posts: 2207
Location: North Alabama
Post Re: Prodigy 1854
Yeah, he will put a fuel gauge if wanted ( even thought they are hit yet miss) but yes sir he paints them and leaves that line unpainted so you can just look an see, where your fuel level is.

Sent from my DROID RAZR using Tapatalk

_________________
2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD

2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD


Tue Dec 31, 2013 7:11 am
Profile
MMT Elite Member

Joined: Wed Mar 11, 2009 12:45 pm
Posts: 9869
Post Re: Prodigy 1854
It's beautiful Clark.


Tue Dec 31, 2013 9:21 am
Profile
MMT 1000 Club

Joined: Tue May 19, 2009 9:48 am
Posts: 2688
Post Re: Prodigy 1854
That is a good looking boat, good job, good design.


Tue Dec 31, 2013 9:40 am
Profile
MMT 1000 Club
User avatar

Joined: Thu Mar 31, 2011 11:21 am
Posts: 2530
Location: Land of 10,000 Lakes
Post Re: Prodigy 1854

_________________
"Two people in this world wear helmets, and that's dare devils and pussies." - Willie Braun


Tue Dec 31, 2013 9:49 am
Profile
MMT 1000 Club

Joined: Thu Mar 01, 2012 4:52 pm
Posts: 1024
Location: Florida
Post Re: Prodigy 1854


Tue Dec 31, 2013 11:31 am
Profile
MMT 1000 Club

Joined: Thu Mar 01, 2012 4:52 pm
Posts: 1024
Location: Florida
Post Re: Prodigy 1854
Good looking boat! Nice job on the build.


Tue Dec 31, 2013 11:37 am
Profile
MMT 1000 Club

Joined: Sat Jun 16, 2012 9:43 am
Posts: 1504
Location: Watoola, Alabama
Post Re: Prodigy 1854
very nice work. i like the v-rake


Tue Dec 31, 2013 12:15 pm
Profile
MMT Member

Joined: Thu Nov 22, 2012 3:17 pm
Posts: 14
Post Re: Prodigy 1854
is this boat for sale or what?


Wed Jan 01, 2014 2:58 pm
Profile
MMT Member

Joined: Thu Nov 22, 2012 3:17 pm
Posts: 14
Post Re: Prodigy 1854
sorry about last post , wrong section plus ruff night


Wed Jan 01, 2014 3:02 pm
Profile
MMT 1000 Club

Joined: Wed Jan 18, 2012 7:21 pm
Posts: 2207
Location: North Alabama
Post Re: Prodigy 1854
He can build you one!

Sent from my DROID RAZR using Tapatalk

_________________
2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD

2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD


Wed Jan 01, 2014 6:29 pm
Profile
MMT Sponsor

Joined: Wed Jul 20, 2011 9:51 am
Posts: 488
Post Re: Prodigy 1854
Id sell this boat yes..

_________________
Prodigy Boats
https://www.facebook.com/Prodigyboats
www.prodigyboats.com
Contact for info - http://prodigyboats.com/contact-us/
706-253-7766


Thu Jan 02, 2014 11:38 am
Profile
MMT Sponsor
User avatar

Joined: Mon Jun 13, 2011 8:49 am
Posts: 3260
Post Re: Prodigy 1854

_________________
http://www.gatorglide.com/

gatorheads@comcast.net


Wed Jan 22, 2014 2:00 pm
Profile WWW
MMT 1000 Club

Joined: Wed Jan 18, 2012 7:21 pm
Posts: 2207
Location: North Alabama
Post Re: Prodigy 1854
He's got it on fb, said he'd take 19 after youth weekend.

Sent from my shitty cell

_________________
2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD

2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD


Tue Jan 28, 2014 1:47 pm
Profile
MMT Sponsor

Joined: Wed Jul 20, 2011 9:51 am
Posts: 488
Post Re: Prodigy 1854
Sold pending funds guys........

_________________
Prodigy Boats
https://www.facebook.com/Prodigyboats
www.prodigyboats.com
Contact for info - http://prodigyboats.com/contact-us/
706-253-7766


Wed Jan 29, 2014 10:02 pm
Profile
MMT Elite Member
User avatar

Joined: Wed Dec 19, 2012 7:52 pm
Posts: 7064
Location: Mallard country
Post Re: Prodigy 1854
Sure is a nice rig!


Wed Jan 29, 2014 10:08 pm
Profile
MMT Sponsor

Joined: Wed Jul 20, 2011 9:51 am
Posts: 488
Post Re: Prodigy 1854
tks sir

_________________
Prodigy Boats
https://www.facebook.com/Prodigyboats
www.prodigyboats.com
Contact for info - http://prodigyboats.com/contact-us/
706-253-7766


Wed Jan 29, 2014 10:25 pm
Profile
MMT 1000 Club

Joined: Wed Jan 18, 2012 7:21 pm
Posts: 2207
Location: North Alabama
Post Re: Prodigy 1854
Your next one going to be full 3/16 Chad?

Sent from my shitty cell

_________________
2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD

2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD


Thu Jan 30, 2014 7:20 am
Profile
MMT Sponsor

Joined: Wed Jul 20, 2011 9:51 am
Posts: 488
Post Re: Prodigy 1854
nah.........I don't need it but we are building a 1854 Stump Tuff Shortly..............3/16 w 8 stringers..........

_________________
Prodigy Boats
https://www.facebook.com/Prodigyboats
www.prodigyboats.com
Contact for info - http://prodigyboats.com/contact-us/
706-253-7766


Thu Jan 30, 2014 9:05 am
Profile
MMT 1000 Club

Joined: Wed Jan 18, 2012 7:21 pm
Posts: 2207
Location: North Alabama
Post Re: Prodigy 1854
Hear that, can't wait to see that tank!

Sent from my shitty cell

_________________
2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD

2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD


Thu Jan 30, 2014 9:10 am
Profile
MMT Elite Member

Joined: Wed Mar 11, 2009 12:45 pm
Posts: 9869
Post Re: Prodigy 1854
If they are going to be running alot of stumps, I would suggest putting the 2x2 stringers on 6" centers.


Thu Jan 30, 2014 10:19 am
Profile
MMT 1000 Club

Joined: Thu Oct 04, 2012 7:36 am
Posts: 1290
Post Re: Prodigy 1854


Fri Jan 31, 2014 5:12 pm
Profile
MMT Elite Member

Joined: Wed Mar 11, 2009 12:45 pm
Posts: 9869
Post Re: Prodigy 1854
Mine ran just fine with a stock motor, but it is a 1848. But it ran its ass off with a stage 2. :lol:

Sent from my XT1080 using Tapatalk


Fri Jan 31, 2014 5:28 pm
Profile
MMT 1000 Club
User avatar

Joined: Fri Jan 23, 2009 1:27 pm
Posts: 1095
Location: SW Michigan
Post Re: Prodigy 1854

_________________
1854 Prodigy Open
HDR/Stage 3 mods
Prodigy Boats Pro Staff
BPS Swamp Staff Member
Blackwater Marine LLC.


Quote classic by rangerp: "Red seemed to be enjoying herself, and I assume by the look on her face was about to hit the high-note and throw a locate as she treed the possum."


Fri Jan 31, 2014 5:34 pm
Profile
MMT 1000 Club
User avatar

Joined: Fri Jun 25, 2010 3:33 pm
Posts: 1177
Location: WI
Post Re: Prodigy 1854
What trailer are u running? Is that the skt line from magic tilt 1860

_________________
1848 DeadFowl pushed by a Stage 4 Delta powered MB HDR (JBP dusting)


Fri Jan 31, 2014 7:29 pm
Profile
MMT 1000 Club

Joined: Wed Jan 18, 2012 7:21 pm
Posts: 2207
Location: North Alabama
Post Re: Prodigy 1854
Yeah, thought it was a moeller. And smoke is right, these boats ride great, and haul some serious ass with a built motor. This is a sweet setup, peeked it while picking up mine, well worth price

Sent from my shitty cell

_________________
2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD

2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD


Fri Jan 31, 2014 7:35 pm
Profile
MMT 1000 Club

Joined: Thu Oct 04, 2012 7:36 am
Posts: 1290
Post Re: Prodigy 1854


Fri Jan 31, 2014 9:22 pm
Profile
MMT Elite Member

Joined: Wed Mar 11, 2009 12:45 pm
Posts: 9869
Post Re: Prodigy 1854


Fri Jan 31, 2014 9:32 pm
Profile
MMT 1000 Club
User avatar

Joined: Sun Apr 17, 2011 2:29 pm
Posts: 3227
Location: Black River, MS
Post Re: Prodigy 1854
Nice boat.

_________________
WC CUSTOM 20X54 Battleship w/ Gator Glide Pushed & Pulled hard by an HDR!

Don't be scared...Hit It and Hold It!!!


Fri Jan 31, 2014 10:50 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jul 18, 2012 4:14 pm
Posts: 4781
Post Re: Prodigy 1854
Where did you get the blind shaggy panels? Good looking boat Chad. Sometimes less is more. Good job.


Fri Jan 31, 2014 10:54 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jul 18, 2012 4:14 pm
Posts: 4781
Post Re: Prodigy 1854
I see the floors are leveled with the cross braces. Hiw did you do that without having a place that will hook on the hull bottom? Is the cross brace still on top of runners and the floor is raised? Also, no braces going up sidewall from cross braces?


Fri Jan 31, 2014 11:01 pm
Profile
MMT Sponsor

Joined: Wed Jul 20, 2011 9:51 am
Posts: 488
Post Re: Prodigy 1854
those panels have been in the family.............. lol I bought en entire boat a couple years ago just to get another set of them lol

the cross braces DO NOT touch the floor..........there is nothing to hook

no need for the braces going up the side as my hulls are broken and the sides do not heed to be held up as there is not force on them trying to come back down..........

tks for the compliments bro

_________________
Prodigy Boats
https://www.facebook.com/Prodigyboats
www.prodigyboats.com
Contact for info - http://prodigyboats.com/contact-us/
706-253-7766


Fri Jan 31, 2014 11:04 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 54 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 107 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: