Author |
Message |
Prodigy
MMT Sponsor
Joined: Wed Jul 20, 2011 9:51 am Posts: 488
|
 Prodigy 1854
This is my personal boat....... It was built to be open and functional. I like space on the inside of my boat and hate clutter and things getting in the way............Every small detail has a purpose.
Options
1854 .125 5086 longitudinal stringers V Rake Rear Drop Deck Catwalks Rear Catwalk Bench 45 degree corners in rear large deck hatch extended deck trolling motor plug and bracket dual spud holes up front which can also be used for a spotlight/winch setup shark eyes full floors recessed bracing battery inside drop deck 13 gallon permanent fuel tank deck filler green LED lights under all flat surfaces 6 switch panel 1500 GPH Rule Bilge hydroturf Prodigy Bottoms Camo Gator Glide tall transom dual drain plugs grab bar 4 cup holders
MudBuddy Black Death 4500 Tall Transom 32" out drive carb cover painted Prodigy Bottoms
Magic Tilt Alum trailer 4 6" bunks carpeted fender pads side guides 14" custom rims and tires
You do not have the required permissions to view the files attached to this post.
_________________ Prodigy Boats https://www.facebook.com/Prodigyboats www.prodigyboats.com Contact for info - http://prodigyboats.com/contact-us/ 706-253-7766
|
Mon Dec 30, 2013 10:30 pm |
|
 |
JLACOUR
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:18 pm Posts: 4915 Location: Lake Jackson, TX
|
 Re: Prodigy 1854
Clean boat!
_________________ 37 PD EFI FPR 18x48 Tiller SOLD -- 36 PD EFI FPR 18x48 Stick Steer SOLD -- 27 PD FPR 16x36 Skiff
|
Mon Dec 30, 2013 10:43 pm |
|
 |
btmannin
MMT 1000 Club
Joined: Tue Jan 15, 2013 5:25 pm Posts: 1723 Location: Oxford/Jackson ms
|
 Re: Prodigy 1854
That the one from the video you posted a few weeks ago? Damn fine lookin boat man you and Corey from cottonmouth are puttin out some of my favorite boats around lately.. Keep up the good work
_________________ 1436 tin can shoved by a 16 GDLT 16.5x48 running like hell from a built 40 merc
Well they call me king turd up here on shit mountain, but if you want it you can have the crown.
|
Tue Dec 31, 2013 12:17 am |
|
 |
Frog
MMT Sponsor
Joined: Mon Jun 13, 2011 8:49 am Posts: 3260
|
 Re: Prodigy 1854
What do you want for it?
_________________ http://www.gatorglide.com/
gatorheads@comcast.net
|
Tue Dec 31, 2013 4:14 am |
|
 |
Prodigy
MMT Sponsor
Joined: Wed Jul 20, 2011 9:51 am Posts: 488
|
 Re: Prodigy 1854
No this is a diff one.. That one was a 1754
_________________ Prodigy Boats https://www.facebook.com/Prodigyboats www.prodigyboats.com Contact for info - http://prodigyboats.com/contact-us/ 706-253-7766
|
Tue Dec 31, 2013 5:59 am |
|
 |
DmaxHunter
MMT 1000 Club
Joined: Wed Jan 18, 2012 7:21 pm Posts: 2207 Location: North Alabama
|
 Re: Prodigy 1854
Finally got you your boat, looks awesome bra. I'm still shocked you don't have a 7000 hanging off the back! But that is still one sexy ass rig.
Sent from my DROID RAZR using Tapatalk
_________________ 2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD
2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD
|
Tue Dec 31, 2013 6:27 am |
|
 |
Gameover
MMT 1000 Club
Joined: Tue Jan 03, 2012 9:06 am Posts: 3673 Location: Prarieville,LA
|
 Re: Prodigy 1854
what gas tank is that?
_________________ 1754 GTR Xtreme CC w/ Purple Kool-aid Additives
Never Forget our Fallen Soliders
|
Tue Dec 31, 2013 6:44 am |
|
 |
DmaxHunter
MMT 1000 Club
Joined: Wed Jan 18, 2012 7:21 pm Posts: 2207 Location: North Alabama
|
 Re: Prodigy 1854
Believe its a moeller permanent 13, correct me if I'm wrong Chad
Sent from my DROID RAZR using Tapatalk
_________________ 2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD
2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD
|
Tue Dec 31, 2013 6:58 am |
|
 |
Gameover
MMT 1000 Club
Joined: Tue Jan 03, 2012 9:06 am Posts: 3673 Location: Prarieville,LA
|
 Re: Prodigy 1854
_________________ 1754 GTR Xtreme CC w/ Purple Kool-aid Additives
Never Forget our Fallen Soliders
|
Tue Dec 31, 2013 7:01 am |
|
 |
DmaxHunter
MMT 1000 Club
Joined: Wed Jan 18, 2012 7:21 pm Posts: 2207 Location: North Alabama
|
 Re: Prodigy 1854
Yeah, he will put a fuel gauge if wanted ( even thought they are hit yet miss) but yes sir he paints them and leaves that line unpainted so you can just look an see, where your fuel level is.
Sent from my DROID RAZR using Tapatalk
_________________ 2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD
2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD
|
Tue Dec 31, 2013 7:11 am |
|
 |
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 Re: Prodigy 1854
It's beautiful Clark.
|
Tue Dec 31, 2013 9:21 am |
|
 |
Jamie B.
MMT 1000 Club
Joined: Tue May 19, 2009 9:48 am Posts: 2688
|
 Re: Prodigy 1854
That is a good looking boat, good job, good design.
|
Tue Dec 31, 2013 9:40 am |
|
 |
4Cody4
MMT 1000 Club
Joined: Thu Mar 31, 2011 11:21 am Posts: 2530 Location: Land of 10,000 Lakes
|
 Re: Prodigy 1854
_________________ "Two people in this world wear helmets, and that's dare devils and pussies." - Willie Braun
|
Tue Dec 31, 2013 9:49 am |
|
 |
gfowel
MMT 1000 Club
Joined: Thu Mar 01, 2012 4:52 pm Posts: 1024 Location: Florida
|
 Re: Prodigy 1854
|
Tue Dec 31, 2013 11:31 am |
|
 |
gfowel
MMT 1000 Club
Joined: Thu Mar 01, 2012 4:52 pm Posts: 1024 Location: Florida
|
 Re: Prodigy 1854
Good looking boat! Nice job on the build.
|
Tue Dec 31, 2013 11:37 am |
|
 |
cr244
MMT 1000 Club
Joined: Sat Jun 16, 2012 9:43 am Posts: 1504 Location: Watoola, Alabama
|
 Re: Prodigy 1854
very nice work. i like the v-rake
|
Tue Dec 31, 2013 12:15 pm |
|
 |
mike9b9
MMT Member
Joined: Thu Nov 22, 2012 3:17 pm Posts: 14
|
 Re: Prodigy 1854
is this boat for sale or what?
|
Wed Jan 01, 2014 2:58 pm |
|
 |
mike9b9
MMT Member
Joined: Thu Nov 22, 2012 3:17 pm Posts: 14
|
 Re: Prodigy 1854
sorry about last post , wrong section plus ruff night
|
Wed Jan 01, 2014 3:02 pm |
|
 |
DmaxHunter
MMT 1000 Club
Joined: Wed Jan 18, 2012 7:21 pm Posts: 2207 Location: North Alabama
|
 Re: Prodigy 1854
He can build you one!
Sent from my DROID RAZR using Tapatalk
_________________ 2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD
2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD
|
Wed Jan 01, 2014 6:29 pm |
|
 |
Prodigy
MMT Sponsor
Joined: Wed Jul 20, 2011 9:51 am Posts: 488
|
 Re: Prodigy 1854
Id sell this boat yes..
_________________ Prodigy Boats https://www.facebook.com/Prodigyboats www.prodigyboats.com Contact for info - http://prodigyboats.com/contact-us/ 706-253-7766
|
Thu Jan 02, 2014 11:38 am |
|
 |
Frog
MMT Sponsor
Joined: Mon Jun 13, 2011 8:49 am Posts: 3260
|
 Re: Prodigy 1854
_________________ http://www.gatorglide.com/
gatorheads@comcast.net
|
Wed Jan 22, 2014 2:00 pm |
|
 |
DmaxHunter
MMT 1000 Club
Joined: Wed Jan 18, 2012 7:21 pm Posts: 2207 Location: North Alabama
|
 Re: Prodigy 1854
He's got it on fb, said he'd take 19 after youth weekend.
Sent from my shitty cell
_________________ 2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD
2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD
|
Tue Jan 28, 2014 1:47 pm |
|
 |
Prodigy
MMT Sponsor
Joined: Wed Jul 20, 2011 9:51 am Posts: 488
|
 Re: Prodigy 1854
Sold pending funds guys........
_________________ Prodigy Boats https://www.facebook.com/Prodigyboats www.prodigyboats.com Contact for info - http://prodigyboats.com/contact-us/ 706-253-7766
|
Wed Jan 29, 2014 10:02 pm |
|
 |
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm Posts: 7064 Location: Mallard country
|
 Re: Prodigy 1854
Sure is a nice rig!
|
Wed Jan 29, 2014 10:08 pm |
|
 |
Prodigy
MMT Sponsor
Joined: Wed Jul 20, 2011 9:51 am Posts: 488
|
 Re: Prodigy 1854
tks sir
_________________ Prodigy Boats https://www.facebook.com/Prodigyboats www.prodigyboats.com Contact for info - http://prodigyboats.com/contact-us/ 706-253-7766
|
Wed Jan 29, 2014 10:25 pm |
|
 |
DmaxHunter
MMT 1000 Club
Joined: Wed Jan 18, 2012 7:21 pm Posts: 2207 Location: North Alabama
|
 Re: Prodigy 1854
Your next one going to be full 3/16 Chad?
Sent from my shitty cell
_________________ 2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD
2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD
|
Thu Jan 30, 2014 7:20 am |
|
 |
Prodigy
MMT Sponsor
Joined: Wed Jul 20, 2011 9:51 am Posts: 488
|
 Re: Prodigy 1854
nah.........I don't need it but we are building a 1854 Stump Tuff Shortly..............3/16 w 8 stringers..........
_________________ Prodigy Boats https://www.facebook.com/Prodigyboats www.prodigyboats.com Contact for info - http://prodigyboats.com/contact-us/ 706-253-7766
|
Thu Jan 30, 2014 9:05 am |
|
 |
DmaxHunter
MMT 1000 Club
Joined: Wed Jan 18, 2012 7:21 pm Posts: 2207 Location: North Alabama
|
 Re: Prodigy 1854
Hear that, can't wait to see that tank!
Sent from my shitty cell
_________________ 2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD
2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD
|
Thu Jan 30, 2014 9:10 am |
|
 |
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 Re: Prodigy 1854
If they are going to be running alot of stumps, I would suggest putting the 2x2 stringers on 6" centers.
|
Thu Jan 30, 2014 10:19 am |
|
 |
nasty
MMT 1000 Club
Joined: Thu Oct 04, 2012 7:36 am Posts: 1290
|
 Re: Prodigy 1854
|
Fri Jan 31, 2014 5:12 pm |
|
 |
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 Re: Prodigy 1854
Mine ran just fine with a stock motor, but it is a 1848. But it ran its ass off with a stage 2.  Sent from my XT1080 using Tapatalk
|
Fri Jan 31, 2014 5:28 pm |
|
 |
Smoke
MMT 1000 Club
Joined: Fri Jan 23, 2009 1:27 pm Posts: 1095 Location: SW Michigan
|
 Re: Prodigy 1854
_________________ 1854 Prodigy Open HDR/Stage 3 mods Prodigy Boats Pro Staff BPS Swamp Staff Member Blackwater Marine LLC.
Quote classic by rangerp: "Red seemed to be enjoying herself, and I assume by the look on her face was about to hit the high-note and throw a locate as she treed the possum."
|
Fri Jan 31, 2014 5:34 pm |
|
 |
schmitt
MMT 1000 Club
Joined: Fri Jun 25, 2010 3:33 pm Posts: 1177 Location: WI
|
 Re: Prodigy 1854
What trailer are u running? Is that the skt line from magic tilt 1860
_________________ 1848 DeadFowl pushed by a Stage 4 Delta powered MB HDR (JBP dusting)
|
Fri Jan 31, 2014 7:29 pm |
|
 |
DmaxHunter
MMT 1000 Club
Joined: Wed Jan 18, 2012 7:21 pm Posts: 2207 Location: North Alabama
|
 Re: Prodigy 1854
Yeah, thought it was a moeller. And smoke is right, these boats ride great, and haul some serious ass with a built motor. This is a sweet setup, peeked it while picking up mine, well worth price
Sent from my shitty cell
_________________ 2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD
2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD
|
Fri Jan 31, 2014 7:35 pm |
|
 |
nasty
MMT 1000 Club
Joined: Thu Oct 04, 2012 7:36 am Posts: 1290
|
 Re: Prodigy 1854
|
Fri Jan 31, 2014 9:22 pm |
|
 |
OwenDickeson
MMT Elite Member
Joined: Wed Mar 11, 2009 12:45 pm Posts: 9869
|
 Re: Prodigy 1854
|
Fri Jan 31, 2014 9:32 pm |
|
 |
Migrator
MMT 1000 Club
Joined: Sun Apr 17, 2011 2:29 pm Posts: 3227 Location: Black River, MS
|
 Re: Prodigy 1854
Nice boat.
_________________ WC CUSTOM 20X54 Battleship w/ Gator Glide Pushed & Pulled hard by an HDR!
Don't be scared...Hit It and Hold It!!!
|
Fri Jan 31, 2014 10:50 pm |
|
 |
barnes_53
MMT 1000 Club
Joined: Wed Jul 18, 2012 4:14 pm Posts: 4781
|
 Re: Prodigy 1854
Where did you get the blind shaggy panels? Good looking boat Chad. Sometimes less is more. Good job.
|
Fri Jan 31, 2014 10:54 pm |
|
 |
barnes_53
MMT 1000 Club
Joined: Wed Jul 18, 2012 4:14 pm Posts: 4781
|
 Re: Prodigy 1854
I see the floors are leveled with the cross braces. Hiw did you do that without having a place that will hook on the hull bottom? Is the cross brace still on top of runners and the floor is raised? Also, no braces going up sidewall from cross braces?
|
Fri Jan 31, 2014 11:01 pm |
|
 |
Prodigy
MMT Sponsor
Joined: Wed Jul 20, 2011 9:51 am Posts: 488
|
 Re: Prodigy 1854
those panels have been in the family.............. lol I bought en entire boat a couple years ago just to get another set of them lol
the cross braces DO NOT touch the floor..........there is nothing to hook
no need for the braces going up the side as my hulls are broken and the sides do not heed to be held up as there is not force on them trying to come back down..........
tks for the compliments bro
_________________ Prodigy Boats https://www.facebook.com/Prodigyboats www.prodigyboats.com Contact for info - http://prodigyboats.com/contact-us/ 706-253-7766
|
Fri Jan 31, 2014 11:04 pm |
|
 |
|