It is currently Thu Oct 31, 2024 5:52 pm




Reply to topic  [ 12 posts ] 
 GDSD 
Author Message
MMT Member

Joined: Wed Aug 21, 2013 12:31 pm
Posts: 22
Post GDSD
Alright guys looking at buying my first MM this week. It's a 2008 GDSD 65hrs on it. Also has a mods on it. Carb Kit, Exhaust, Electronic Rev Limiter, Cam, Bigger push rods, Gear reduction on Belt & 3 props to go with. Now the question is how much would you give for the motor cuz I don't want to get screwed, also does anybody have one of these motors? There likes, dislikes & review on the motor period.. Any advice is welcome, thanks!


Sent from my iPhone using Tapatalk


Mon Aug 17, 2015 6:37 am
Profile
MMT 1000 Club

Joined: Sun Dec 14, 2014 2:21 pm
Posts: 3214
Post Re: GDSD
Don't know anything about the mods or how it should be priced. I've had my first gdsd for a little over a month now. Had it out 5 times. I love the way the trim works. Set it an forget it. The trim tabs keep it where it needs to be. Neutral would be nice to have. Has some excessive tiller torque at certain times depending on the load and in heavy veggies I almost have to lean my hip against it. I've driven mud buddy's HD before and this motor is a lot different. Kind of like a hybrid between a longtail and surface drive in the way you operate it. Lovin it so far though.


Sent from my iPhone using Tapatalk


Mon Aug 17, 2015 7:19 am
Profile
MMT Member

Joined: Wed Aug 21, 2013 12:31 pm
Posts: 22
Post Re: GDSD
Thanks for your input man. Also seen I forgot to mention it's a 23hp GDSD.. What sizes motor do you have flint87? What size boat do you have it on? What speeds are you seeing? Just trying to get an idea of what mine would get. I'm gonna see if the guy will let me put the motor on my boat & test it before I buy.


Sent from my iPhone using Tapatalk


Mon Aug 17, 2015 8:04 am
Profile
MMT 1000 Club

Joined: Sun Dec 14, 2014 2:21 pm
Posts: 3214
Post Re: GDSD


Mon Aug 17, 2015 8:18 am
Profile
MMT Member

Joined: Wed Aug 21, 2013 12:31 pm
Posts: 22
Post Re: GDSD
Sounds like it! Ya the boat Im putting that 23 on is only 1648. So I'm thinking it should get decent speed out of it. Especially since has those mods. Will see tho!


Sent from my iPhone using Tapatalk


Mon Aug 17, 2015 8:34 am
Profile
MMT Pro Member

Joined: Mon Dec 09, 2013 12:34 pm
Posts: 265
Location: Pointe Aux Chenes, LA
Post Re: GDSD
This guy just sold a moded 23 on a 1648. You may try to get in touch with him.


viewtopic.php?f=63&t=62992

_________________
37 GTR 1658 GD HULL
35 GDSD (Previous Motor)


Mon Aug 17, 2015 8:40 am
Profile
MMT Member

Joined: Wed Aug 21, 2013 12:31 pm
Posts: 22
Post Re: GDSD
Appreciate it GenHee. I PM him. Thanks


Sent from my iPhone using Tapatalk


Mon Aug 17, 2015 9:13 am
Profile
MMT F.E.
User avatar

Joined: Thu Apr 18, 2013 5:52 pm
Posts: 870
Location: SW LA
Post Re: GDSD
You'll enjoy the GD for your first mm, I love the trim, grab the throttle and don't worry about.. I also love the fact I can do a complete circle in my boat to turn around in very tight canals or wherever. Find you a good dealer or if you know what you're doin when it comes time to check the belt and grease the inside of the housing. It's all in the manual that you can download on GD website.
Wear that kill switch! And Like the post above it can have bad tiller torque but if u setup the weight in the boat right you can let go of the handle and it'll drive plenty straight!
Have fun


Mon Aug 17, 2015 8:49 pm
Profile
MMT 1000 Club

Joined: Sun Sep 01, 2013 2:53 pm
Posts: 3480
Location: Hardin County, Tx
Post Re: GDSD
If it's trimmed right and the skeg is adjusted right, that thing should have damn near zero pull in any direction on the tiller. You'll enjoy it. Don't let not having the bells and whistles steer you or anyone away from the GoDevil. It doesn't need hydraulic trim and I've not found a situation yet that I couldnt do what I needed to without reverse or a clutch. They're tough as nails. Enjoy it!
Where are you located? Feel free to PM me.

_________________
#CFFITR

-Custom pool noodle
-stage 4 water wings


Tue Aug 18, 2015 7:24 am
Profile
MMT Member

Joined: Wed Aug 21, 2013 12:31 pm
Posts: 22
Post Re: GDSD
Thanks guys for the input, I really appreciate it. & Setx longtail I live in east Texas.


Sent from my iPhone using Tapatalk


Wed Aug 19, 2015 6:24 am
Profile
MMT 1000 Club

Joined: Sun Sep 01, 2013 2:53 pm
Posts: 3480
Location: Hardin County, Tx
Post Re: GDSD
Also, as far as pricing on that thing. A brand new 23hp GDSD is something like $4,2XX. So Id say if it's in good shape with those extras and that few hours it would be a good buy for anything under $4000. 65hrs is break-in time lol.

_________________
#CFFITR

-Custom pool noodle
-stage 4 water wings


Wed Aug 19, 2015 6:32 am
Profile
MMT Addict
User avatar

Joined: Thu Jul 21, 2011 9:11 am
Posts: 556
Location: Metairie, LA
Post Re: GDSD


Wed Aug 19, 2015 6:24 pm
Profile WWW
Display posts from previous:  Sort by  
Reply to topic   [ 12 posts ] 

Who is online

Users browsing this forum: No registered users and 56 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: