| Author |
Message |
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
 1750 Deadfowl Build Well guys, I'm a big fan of all the build threads and watching them all come together, so now its almost time for me to start mine! Rj will be building me a 1750 with 3/16th bottom, a 68in beam and 21" sides! I'm going to slap a new 37EFI GTR on the back which is already paid for just waiting for pick up! I don't have any pictures or details just yet, but i wanted to go ahead and get a post started on it. He will be going to pick up materials and motor in roughly two weeks, and if i remember correctly he has a boat ahead of mine, but he thinks (depending on how busy with work he is) that hopefully i should hit the water with mine towards the end of October, first of November just in time for season! Cant wait...as you guys can tell due to the early post! Haha
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Tue Jul 28, 2015 6:13 pm |
|
|
|
DmaxHunter
MMT 1000 Club
Joined: Wed Jan 18, 2012 7:21 pm
Posts: 2207
Location: North Alabama
|
Re: Up and Coming Deadfowl Build Congrats on the new build
_________________
2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD
2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD
|
| Tue Jul 28, 2015 6:18 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: Up and Coming Deadfowl Build Preciate it! I can't wait! still haven't decided completely on paint yet though
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Tue Jul 28, 2015 6:29 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: Up and Coming Deadfowl Build Well its getting closer..he is about finished with the river boat he had to build prior to mine so hopefully here pretty soon he will get rolling on mine! Meanwhile. I've been designing the layout of my trailer i am building and the side bunks and a rough look of it. Here is a few pics for ideas. Any thoughts or opinions are appreciated!
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sun Sep 13, 2015 3:34 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: Up and Coming Deadfowl Build Well the time is here! I don't have many patience so it's been a long wait! But it's finally here, RJ will be starting this weekend! Here is a list and layout of the boat! Stay tuned for pics as he builds!
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Wed Sep 16, 2015 7:43 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build It has began!! The start to my 1750 Deadfowl!!!
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sat Sep 19, 2015 9:16 pm |
|
|
|
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm
Posts: 7064
Location: Mallard country
|
Re: 1750 Deadfowl Build Congrats!! You will love it!
Sent from my iPhone using Tapatalk
|
| Sun Sep 20, 2015 1:54 am |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Preciate it! I can't wait!!
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sun Sep 20, 2015 7:43 am |
|
|
|
med
MMT Elite Member
Joined: Wed Jan 14, 2009 8:25 am
Posts: 6432
Location: the dark side of the moon
|
Re: 1750 Deadfowl Build He's a good dude. He'll do you right.
_________________
1850 & 36pd
|
| Sun Sep 20, 2015 8:08 am |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Yea, i guess he's an alright guy i suppose! haha (just giving you a hard time RJ) Outside of being a friend from bak home, RJ is great guy to deal with and work with for sure, if anyone is looking for a custom builder, he is definitely one to look into! I've seen his boats in person, and ridin in a few of them. Tough, strong, looks great, and performs great!
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sun Sep 20, 2015 8:48 am |
|
|
|
KRS62
MMT Member
Joined: Fri Jul 26, 2013 1:25 pm
Posts: 19
|
Re: 1750 Deadfowl Build Since you are designing your trailer, I thought I would throw this out there. I saw a pic of a trailer the other day and thought it was a really nice design. (Maybe I saw it on here?? I looked for it just now to show you, but couldn't find it.) Basically, starting a few feet back from the tongue, it looked like added channel and expanded metal to form a walking platform. This gave about 1ft solid platform that went all the way back to the axles. This would be really nice for those times when you don't have waders on and need to load/launch the boat. No slipping on the slimy ramp! Just a thought.
KRS
|
| Tue Sep 22, 2015 7:46 am |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Well I'm having Diamond City build the frame (axle, tongue, and bottom metal structure). I'm going to be putting the bottom and side bunks on and the front winch. But I will keep that in mind, that's not a bad idea to add to it! I appreciate it!
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Tue Sep 22, 2015 9:10 am |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Another update, I didn't want to spend the extra money and I don't go through open waters to cut waves, so I decided to just go with a flat bottom into a pointed nose! He got the nose cut and tacked up so the front is starting to take shape!
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Tue Sep 22, 2015 9:18 am |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Wed Sep 23, 2015 8:56 am |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Nose fabbed up and welded up! She's slowly starting to take shape!! ImageUploadedByTapatalk1443058529.777747.jpgImageUploadedByTapatalk1443058541.267273.jpgImageUploadedByTapatalk1443058552.153823.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Wed Sep 23, 2015 7:35 pm |
|
|
|
mizzippi jb
MMT Elite Member
Joined: Wed Sep 21, 2011 2:53 pm
Posts: 5077
Location: The duck Mecca called Ga!
|
Re: 1750 Deadfowl Build Thus dude knows how to make a boat that turns in the woods. May have to make a trip to see him for my next one
Sent from my XT1254 using Tapatalk
_________________
HOTSAUCE170 wrote:
I've never gone to Seminole for the amenities/luxury the two reasons I go down there are to kill shit and get fucked up with like minded individuals aka OG'S. If you want to swirl wine and stay in a room where politics and investment diversity are discussed (with no roaches) lake lanier is near Atlanta. If you wanna have an awesome time and maybe stay in a room where children were conceived on one side and someone got stabbed over an 8-ball on the other come on down I got a can of raid. 
|
| Thu Sep 24, 2015 8:58 am |
|
|
|
TooTall
MMT Pro Member
Joined: Sun Nov 30, 2014 1:37 pm
Posts: 411
Location: Pineville, La
|
Re: 1750 Deadfowl Build I know I definitely will be going with him after the season is over. He makes a sharp looking boat and seems to be a stand up guy from what everyone says on here. He just gonna have his work cut out for him whenever I place my order.. But congrats on the build! Make sure to keep us all updated and post lots of pictures!
|
| Thu Sep 24, 2015 11:16 am |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build He is a pretty awesome guy to work with for sure! I've got quite a few little things that he said will be tough but he can handle em! I'm just ready to see the finished product!! I love build threads so I plan on posting em all up as we go along!
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Thu Sep 24, 2015 12:25 pm |
|
|
|
Migrator
MMT 1000 Club
Joined: Sun Apr 17, 2011 2:29 pm
Posts: 3227
Location: Black River, MS
|
Re: 1750 Deadfowl Build Nice. Very individual design on the bow. RJ is definitely doing good work.
_________________
WC CUSTOM 20X54 Battleship w/ Gator Glide Pushed & Pulled hard by an HDR!
Don't be scared...Hit It and Hold It!!!
|
| Sun Sep 27, 2015 6:27 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Preciate it, I like the look of the point capped with the gunnel cap all the way around. Gives it a good look in my opinion!
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sun Sep 27, 2015 6:38 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Well he was able to get a little bit more done this weekend. He got a little bit of the front bracing done and worked on the transom and got it fabbed and taking shape. ImageUploadedByTapatalk1443405650.672089.jpg
ImageUploadedByTapatalk1443405659.875558.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sun Sep 27, 2015 8:01 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Here is a few more..going with the cut corners on the hunt deck as well! ImageUploadedByTapatalk1443490157.921411.jpg
ImageUploadedByTapatalk1443490170.443246.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Mon Sep 28, 2015 7:29 pm |
|
|
|
North LA Hunter
MMT Elite Member
Joined: Mon Aug 02, 2010 8:39 pm
Posts: 6976
Location: West Monroe, LA
|
Re: 1750 Deadfowl Build Those actually do help. I built my last one like that and helps when turning in the timber.
Sent from my iPhone using Tapatalk
|
| Mon Sep 28, 2015 8:23 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Well that's even more good news then! Lol I liked the looks of them. Wasn't sure if it helped anything or provided anything or not but i liked em. Haha
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Mon Sep 28, 2015 8:33 pm |
|
|
|
tyler_johnson
MMT 1000 Club
Joined: Mon Jan 21, 2013 6:22 pm
Posts: 1094
Location: El Dorado-ish, AR
|
Re: 1750 Deadfowl Build I prefer to pretend the trees aren't even there! might have even run aground befor!
_________________
'13 GTR35 Stage 2 w/ EVT Exhaust, 1750 Voodoo Custom by DFOU!!
|
| Mon Sep 28, 2015 8:47 pm |
|
|
|
TooTall
MMT Pro Member
Joined: Sun Nov 30, 2014 1:37 pm
Posts: 411
Location: Pineville, La
|
Re: 1750 Deadfowl Build How does it help with turning in the timber when it's above the waterline?
|
| Mon Sep 28, 2015 9:32 pm |
|
|
|
North LA Hunter
MMT Elite Member
Joined: Mon Aug 02, 2010 8:39 pm
Posts: 6976
Location: West Monroe, LA
|
Re: 1750 Deadfowl Build
|
| Mon Sep 28, 2015 9:42 pm |
|
|
|
TooTall
MMT Pro Member
Joined: Sun Nov 30, 2014 1:37 pm
Posts: 411
Location: Pineville, La
|
Re: 1750 Deadfowl Build Yeah I gotcha, I thought you meant actual turning ability. And I'm gonna have to stop by the shop sometime to see the one you're working on now!
|
| Mon Sep 28, 2015 10:03 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Talked to RJ some more today, due to the really shallow rake we went with on the nose, we had to do some thinking on the winch mount. I think it turned out pretty well! If you notice in the picture from the inside of the boat, he took some pipe and cut in half for the rope to run against. The nose of this boat, I will agree with Migrator, is definitely turning out to be a very individual and one of a kind! Take a look...
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Tue Sep 29, 2015 4:36 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build I came to town this weekend and got to see my boat in person, and pictures do no justice to say the least!! Very impressed and pleased with how it's turning out!! Here is a few pictures I snapped while I was there ImageUploadedByTapatalk1443986064.550061.jpgImageUploadedByTapatalk1443986080.372011.jpgImageUploadedByTapatalk1443986091.411080.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sun Oct 04, 2015 1:14 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build ImageUploadedByTapatalk1443986137.917201.jpgImageUploadedByTapatalk1443986146.606213.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sun Oct 04, 2015 1:15 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Well the nose is starting to come together! Catwalks will be tied into along the sides as well!ImageUploadedByTapatalk1444353937.015356.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Thu Oct 08, 2015 7:25 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Another couple of views of the nose! Starting to look pretty good!! ImageUploadedByTapatalk1444355894.980795.jpgImageUploadedByTapatalk1444355906.035196.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Thu Oct 08, 2015 7:58 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build RJ got some more of the nose knocked out. He got the front hatch buttoned up, winch mount, and spud pole slot put in! He is working on the floor and boxes next! Can't wait to see it all together and painted! ImageUploadedByTapatalk1444445521.280083.jpgImageUploadedByTapatalk1444445635.753087.jpgImageUploadedByTapatalk1444445645.357565.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Fri Oct 09, 2015 8:54 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build ImageUploadedByTapatalk1444445668.119431.jpgImageUploadedByTapatalk1444445674.839199.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Fri Oct 09, 2015 8:54 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Floor is done! ImageUploadedByTapatalk1444695485.149094.jpgImageUploadedByTapatalk1444695532.972460.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Mon Oct 12, 2015 6:19 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Huntdeck is coming in nicely! I can't thank RJ enough for the awesome work he is putting into my build! He's always got a spot in my boat! ImageUploadedByTapatalk1444789597.048611.jpgImageUploadedByTapatalk1444789663.635494.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Tue Oct 13, 2015 8:28 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build ImageUploadedByTapatalk1444872092.503308.jpgImageUploadedByTapatalk1444872109.381358.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Wed Oct 14, 2015 7:22 pm |
|
|
|
TooTall
MMT Pro Member
Joined: Sun Nov 30, 2014 1:37 pm
Posts: 411
Location: Pineville, La
|
Re: 1750 Deadfowl Build Starting to look more and more like a mud boat
|
| Wed Oct 14, 2015 7:24 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Sure is! Can't wait to strap the motor to the back and see how she does!
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Wed Oct 14, 2015 7:27 pm |
|
|
|
