Author |
Message |
BDUBYA
MMT Addict
Joined: Wed Apr 25, 2012 2:54 am Posts: 623 Location: Toledo Bend
|
 Re: Converting my boat for longtail
Looks good. Ive got mine just about hulled out. Just put a deposit on a MB 44 H. Did your motor bolt on to the transom or did you have to mount an adaptor palte? Did you add any extra floatation?
_________________ Excel 1851vF86 w/ MB 55V SHIT HAPPENS
|
Sun Apr 29, 2012 12:44 am |
|
 |
Glades Ranger
MMT 1000 Club
Joined: Mon Sep 19, 2011 6:32 pm Posts: 1490 Location: south Florida
|
 Re: Converting my boat for longtail
Swamp, when you re-do the floor in alum, put some closed cell foam flotation under the floor and between the ribs. Get a tiny tach to better monitor the motor. That Kohler 27 should not require a squeeze bulb on the fuel line- check all the connections for leaks, leave the vent open when running. Add fuel stabilizer to the gas periodically. Don't bend the side tabs of the cavitation plate just the trailing edge above the prop. You got good advice already; my MB LT has a trim plate so I only have to bend that instead of the whole plate-this could easily be made and added to your plate. Have fun, wear the kill switch lanyard, and easy on the turns! 
_________________ Sailing in the sawgrass /1648 grizzly and Swomp 26.5 EFI
|
Sun Apr 29, 2012 7:04 am |
|
 |
BDUBYA
MMT Addict
Joined: Wed Apr 25, 2012 2:54 am Posts: 623 Location: Toledo Bend
|
 Re: Converting my boat for longtail
_________________ Excel 1851vF86 w/ MB 55V SHIT HAPPENS
|
Mon Apr 30, 2012 9:58 pm |
|
 |
Glades Ranger
MMT 1000 Club
Joined: Mon Sep 19, 2011 6:32 pm Posts: 1490 Location: south Florida
|
 Re: Converting my boat for longtail
Negative! That will absorb water and be a pain to remove. I'm talking of a product like Dow Corning's Foamulator foam sheets- you can cut to fit and absorb almost nothing. The first time around I used hard polystyrene sheets and this did not absorb water and it weighs very little.
_________________ Sailing in the sawgrass /1648 grizzly and Swomp 26.5 EFI
|
Tue May 01, 2012 3:24 am |
|
 |
BDUBYA
MMT Addict
Joined: Wed Apr 25, 2012 2:54 am Posts: 623 Location: Toledo Bend
|
 Re: Converting my boat for longtail
Thanks. Sounds like you just saved me a headache.
_________________ Excel 1851vF86 w/ MB 55V SHIT HAPPENS
|
Tue May 01, 2012 7:23 am |
|
 |
Da-Cajun-Angla
MMT Addict
Joined: Thu Jul 23, 2009 8:08 am Posts: 629
|
 Re: Converting my boat for longtail
_________________ cajun: its real simple, we live back hea', dis' is our home, an' nobody don' fuk wit' us!
|
Tue May 01, 2012 10:11 am |
|
 |
Glades Ranger
MMT 1000 Club
Joined: Mon Sep 19, 2011 6:32 pm Posts: 1490 Location: south Florida
|
 Re: Converting my boat for longtail
Absolutely. I keep a backup mechanical Kohler pump- this simply screwbolts onto the cylinder; if you have an electric fuel pump then the bulb is a good idea.
_________________ Sailing in the sawgrass /1648 grizzly and Swomp 26.5 EFI
|
Tue May 01, 2012 10:37 am |
|
 |
mudduck1448
MMT Pro Member
Joined: Sat Sep 10, 2011 6:34 pm Posts: 90 Location: Four Oaks, NC
|
 Re: Converting my boat for longtail
Outboards have electric fuel pumps and still use a primer bulb so why not
|
Wed May 02, 2012 7:34 am |
|
 |
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
 Re: Converting my boat for longtail
Bulbs are notorious for letting air in the system. On these low pressure fuel systems, a little air can cause a lot of headaches.
|
Wed May 02, 2012 6:13 pm |
|
 |
SwampThing07
MMT Pro Member
Joined: Fri Dec 16, 2011 12:28 pm Posts: 305
|
 Converting my boat for longtail
Bye bye longtail.
Check went out today for surface drive.......
|
Fri May 04, 2012 5:19 pm |
|
 |
Glades Ranger
MMT 1000 Club
Joined: Mon Sep 19, 2011 6:32 pm Posts: 1490 Location: south Florida
|
 Re: Converting my boat for longtail
Dang! That's the fastest upgrade I've seen! Forget the alum floor. The water level is dropping here, it would not be a good time to run a shortail but you would definitely find out about getting it stuck real good.  Have fun, Swamp!
_________________ Sailing in the sawgrass /1648 grizzly and Swomp 26.5 EFI
|
Sat May 05, 2012 5:23 am |
|
 |
SwampThing07
MMT Pro Member
Joined: Fri Dec 16, 2011 12:28 pm Posts: 305
|
 Converting my boat for longtail
Ha yeh The areas I fish aren't to bad yet but we def need some rain. I can't wait to get new motor. Have to wait 4-5 weeks!
|
Sat May 05, 2012 5:02 pm |
|
 |
indawoods
MMT Pro Member
Joined: Fri Sep 23, 2011 3:32 am Posts: 287
|
 Re: Converting my boat for longtail
|
Sun May 06, 2012 7:20 pm |
|
 |
SwampThing07
MMT Pro Member
Joined: Fri Dec 16, 2011 12:28 pm Posts: 305
|
 Converting my boat for longtail
Finally back alive with new motor. Maiden voyage tomorrow!
|
Fri Jun 15, 2012 2:00 pm |
|
 |
PaleoHuntr
MMT 1000 Club
Joined: Mon Feb 21, 2011 5:21 pm Posts: 1800 Location: Idaho Falls, ID
|
 Re: Converting my boat for longtail
Your dead to us now! 
_________________ 1976 16X48 Lowe powered by a 25hp MB LT and dino turds
To have really lived, you must have almost died. To those who have fought for it, freedom has a flavor the protected will never know.
|
Fri Jun 15, 2012 2:02 pm |
|
 |
SwampThing07
MMT Pro Member
Joined: Fri Dec 16, 2011 12:28 pm Posts: 305
|
 Converting my boat for longtail
Lol I did like my long tail though
|
Fri Jun 15, 2012 2:27 pm |
|
 |
SwampThing07
MMT Pro Member
Joined: Fri Dec 16, 2011 12:28 pm Posts: 305
|
 Converting my boat for longtail
Awesome speeds, 21.2 with 3 people in deep water
|
Sat Jun 16, 2012 2:06 pm |
|
 |
Buzz Killington
MMT 1000 Club
Joined: Tue Jan 10, 2012 12:33 pm Posts: 2455
|
 Converting my boat for longtail
That's not a longtail!!!!
lol
_________________ Support your troops - they support you
B. MacDonald
|
Mon Jun 18, 2012 5:03 am |
|
 |
SwampThing07
MMT Pro Member
Joined: Fri Dec 16, 2011 12:28 pm Posts: 305
|
 Converting my boat for longtail
I used to have a long tail, too slow!
|
Mon Jun 18, 2012 6:55 am |
|
 |
Buzz Killington
MMT 1000 Club
Joined: Tue Jan 10, 2012 12:33 pm Posts: 2455
|
 Converting my boat for longtail
Too slow? Are you racing someone? 
_________________ Support your troops - they support you
B. MacDonald
|
Mon Jun 18, 2012 2:20 pm |
|
 |
PaleoHuntr
MMT 1000 Club
Joined: Mon Feb 21, 2011 5:21 pm Posts: 1800 Location: Idaho Falls, ID
|
 Re: Converting my boat for longtail
_________________ 1976 16X48 Lowe powered by a 25hp MB LT and dino turds
To have really lived, you must have almost died. To those who have fought for it, freedom has a flavor the protected will never know.
|
Mon Jun 18, 2012 9:23 pm |
|
 |
|